From: Russ Anderson <rja@sgi.com>
To: linux-ia64@vger.kernel.org
Subject: Re: Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093
Date: Thu, 28 Feb 2008 00:34:02 +0000 [thread overview]
Message-ID: <20080228003402.GB28437@sgi.com> (raw)
In-Reply-To: <200802251027.15107.bjorn.helgaas@hp.com>
On Wed, Feb 27, 2008 at 05:12:26PM -0700, Alex Chiang wrote:
> * Alex Chiang <achiang@hp.com>:
> >
> > And if anyone has other suggestions too, I'm happy to hear them.
>
> Actually, this might be a relatively clean approach. As far as I
> can tell, the only purpose for sal_revision / sal_version is to
> display some boot messages. No one (other than my use below) is
> keying off them for anything.
>
> My fixup is based on the mail that Russ sent out with his
> bootlog. It contained this line:
>
> SAL 2.9: SGI SN2 version 1.30
>
> So that's what I'm keying off of below.
That may be as clean as anything.
> Thanks.
>
> /ac
>
> From: Alex Chiang <achiang@hp.com>
> Subject: [PATCH] ia64: workaround tiger ia64_sal_get_physical_id_info hang
>
> Intel Tiger platforms hang when calling SAL_GET_PHYSICAL_ID_INFO
> instead of properly returning -1 for unimplemented, so add a
> version check.
>
> SGI Altix platforms have an incorrect SAL version hard-coded into
> their prom -- they encode 2.9, but actually implement 3.2 -- so
> fix it up and allow ia64_sal_get_physical_id_info to keep
> working.
>
> Signed-off-by: Alex Chiang <achiang@hp.com>
> ---
> diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
> index f44fe84..4f3686a 100644
> --- a/arch/ia64/kernel/sal.c
> +++ b/arch/ia64/kernel/sal.c
> @@ -109,6 +109,15 @@ check_versions (struct ia64_sal_systab *systab)
> sal_revision = SAL_VERSION_CODE(2, 8);
> sal_version = SAL_VERSION_CODE(0, 0);
> }
> +
> + if (ia64_platform_is("sn2")
> + && (sal_revision = SAL_VERSION_CODE(2, 9))
> + && (sal_version = SAL_VERSION_CODE(1, 90)))
The sal_version check should be removed. The revision has been
stuck at 2.9 but the version has been changing.
> + /*
> + * SGI Altix has hard-coded version 2.9 in their prom
> + * but they actually implement 3.2, so let's fix it here.
> + */
> + sal_revision = SAL_VERSION_CODE(3, 2);
> }
>
> static void __init
> diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
> index 2251118..f4904db 100644
> --- a/include/asm-ia64/sal.h
> +++ b/include/asm-ia64/sal.h
> @@ -807,6 +807,10 @@ static inline s64
> ia64_sal_physical_id_info(u16 *splid)
> {
> struct ia64_sal_retval isrv;
> +
> + if (sal_revision < SAL_VERSION_CODE(3,2))
> + return -1;
> +
> SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0);
> if (splid)
> *splid = isrv.v0;
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Russ Anderson, OS RAS/Partitioning Project Lead
SGI - Silicon Graphics Inc rja@sgi.com
next prev parent reply other threads:[~2008-02-28 0:34 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-25 17:27 Tiger oops in ia64_sal_physical_id_info (was [RFC] regression: 113134fcbca83619be4c68d0ca66db609 Bjorn Helgaas
2008-02-25 23:08 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression: Alex Chiang
2008-02-26 1:11 ` Shaohua Li
2008-02-26 7:15 ` Alex Chiang
2008-02-26 9:24 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Li, Shaohua
2008-02-26 17:51 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-26 22:45 ` Alex Chiang
2008-02-26 23:07 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-26 23:46 ` Russ Anderson
2008-02-26 23:50 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-27 0:00 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-27 0:10 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-27 0:15 ` Shaohua Li
2008-02-27 0:23 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Russ Anderson
2008-02-27 0:34 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-27 1:05 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Russ Anderson
2008-02-27 14:38 ` Luck, Tony
2008-02-27 15:19 ` Russ Anderson
2008-02-27 16:50 ` Russ Anderson
2008-02-27 23:43 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-28 0:12 ` Alex Chiang
2008-02-28 0:30 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-28 0:31 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-28 0:34 ` Russ Anderson [this message]
2008-02-28 0:42 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-28 1:41 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-28 3:47 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Russ Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080228003402.GB28437@sgi.com \
--to=rja@sgi.com \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox