From: Alex Chiang <achiang@hp.com>
To: Christoph Lameter <cl@linux-foundation.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>,
penberg@cs.helsinki.fi, linux-ia64@vger.kernel.org,
linux-mm@kvack.org
Subject: Re: SLUB ia64 linux-next crash bisected to 756dee75
Date: Thu, 21 Jan 2010 21:47:49 +0000 [thread overview]
Message-ID: <20100121214749.GJ17684@ldl.fc.hp.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1001191545170.26683@router.home>
Christoph sent me another debug patch off-list.
Here is another dump of dmesg. I tried to trim it a little bit
where it made sense.
ELILO boot: achiang slub_debug
Uncompressing Linux... done
Loading file initrd-2.6.33-rc3-next-20100111-dirty...done
Initializing cgroup subsys cpuset
Linux version 2.6.33-rc3-next-20100111-dirty (root@coffee0) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #21 SMP Thu Jan 21 13:44:31 MST 2010
[...]
16 CPUs available, 16 CPUs total
ACPI: SLIT table looks invalid. Not used.
Number of logical nodes in system = 3
Number of memory chunks in system = 5
SMP: Allowing 16 CPUs, 0 hotplug CPUs
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
warning: skipping physical page 0
Initial ramdisk at: 0xe0000787fa9c6000 (6058234 bytes)
SAL 3.20: HP Orca/IPF version 9.48
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
MCA related initialization done
warning: skipping physical page 0
Virtual mem_map starts at 0xa07ffffe5a400000
Zone PFN ranges:
DMA 0x00000001 -> 0x00010000
Normal 0x00010000 -> 0x0787fc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
2: 0x00000001 -> 0x00001ffe
0: 0x07002000 -> 0x07005db7
0: 0x07005db8 -> 0x0707fb00
1: 0x07800000 -> 0x0787fbd9
1: 0x0787fbe8 -> 0x0787fbfd
On node 0 totalpages: 514815
free_area_init_node: node 0, pgdat e000070020080000, node_mem_map a07fffffe2470000
Normal zone: 440 pages used for memmap
Normal zone: 514375 pages, LIFO batch:1
On node 1 totalpages: 523246
free_area_init_node: node 1, pgdat e000078000090080, node_mem_map a07ffffffe400000
Normal zone: 448 pages used for memmap
Normal zone: 522798 pages, LIFO batch:1
On node 2 totalpages: 8189
free_area_init_node: node 2, pgdat e000000000120100, node_mem_map a07ffffe5a400000
DMA zone: 7 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8182 pages, LIFO batch:0
pcpu-alloc: s43032 r8192 d14312 u65536 alloc=1*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [1] 08 [1] 09 [1] 10 [1] 11 [1] 12 [1] 13 [1] 14 [1] 15
Built 3 zonelists in Zone order, mobility grouping on. Total pages: 1045355
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi1:\efi\SuSE\vmlinuz-2.6.33-rc3-next-20100111-dirty root=/dev/disk/by-id/scsi-35001d38000048bd8-part2 debug slub_debug
PID hash table entries: 4096 (order: -1, 32768 bytes)
Memory: 66849344k/66910528k available (8033k code, 110720k reserved, 10804k data, 1984k init)
SLUB: Unable to allocate memory from node 2
SLUB: Allocating a useless per node structure in order to be able to continue
Creating slab kmem_cache_node sized realsize\x136 order=0 offsetr flags=0
Creating slab kmalloc-96 sizeñ realsize\x168 order=0 offset\x104 flags=0
Creating slab kmalloc-192 size\x192 realsize&4 order=0 offset 0 flags=0
Creating slab kmalloc size=8 realsizeÄ order=0 offset\x16 flags=0
Creating slab kmalloc size\x16 realsizeà order=0 offset$ flags=0
Creating slab kmalloc size2 realsize\x104 order=0 offset@ flags=0
Creating slab kmalloc sized realsize\x136 order=0 offsetr flags=0
Creating slab kmalloc size\x128 realsize 0 order=0 offset\x136 flags=0
Creating slab kmalloc size%6 realsize28 order=0 offset&4 flags=0
Creating slab kmalloc sizeQ2 realsizeX4 order=0 offsetR0 flags=0
Creating slab kmalloc size\x1024 realsize\x1096 order=0 offset\x1032 flags=0
Creating slab kmalloc size 48 realsize!20 order=0 offset 56 flags=0
Creating slab kmalloc size@96 realsizeA68 order=1 offsetA04 flags=0
Creating slab kmalloc sizeÅ92 realsizeÇ64 order=2 offsetÇ00 flags=0
Creating slab kmalloc size\x16384 realsize\x16456 order=3 offset\x16392 flags=0
Creating slab kmalloc size2768 realsize2840 order=3 offset2776 flags=0
Creating slab kmalloc sizee536 realsizee608 order=3 offsete544 flags=0
Creating slab kmalloc size\x131072 realsize\x131144 order=3 offset\x131080 flags=0
SLUB: Genslabs\x18, HWalign\x128, Order=0-3, MinObjects=0, CPUs\x16, Nodes\x1024
Hierarchical RCU implementation.
NR_IRQS:1024
CPU 0: base freq&6.666MHz, ITC ratio=6/4, ITC freq@0.000MHz+/-75ppm
Console: colour dummy device 80x25
Creating slab idr_layer_cache sizeT4 realsizea6 order=0 offsetU2 flags@000
Creating slab numa_policy size&4 realsize36 order=0 offset'2 flags@000
Creating slab shared_policy_node sizeH realsize\x120 order=0 offsetV flags@000
Calibrating delay loop... 3194.88 BogoMIPS (lpjc89760)
Creating slab pid sizeÄ realsize%6 order=0 offsetà flagsB000
Creating slab anon_vma size$ realsizeñ order=0 offset2 flags¿000
Creating slab cred_jar size\x104 realsize%6 order=0 offset\x112 flagsB000
Creating slab sighand_cache size\x1576 realsize\x1664 order=0 offset\x1584 flags¬000
Creating slab signal_cache sizeÄ8 realsizeâ6 order=0 offsetÅ6 flagsB000
Creating slab files_cache sizev8 realsizeâ6 order=0 offsetw6 flagsB000
Creating slab fs_cache sizeH realsize\x128 order=0 offsetV flagsB000
Creating slab mm_struct size\x1280 realsize\x1408 order=0 offset\x1288 flagsB000
Creating slab vm_area_struct size\x176 realsize$8 order=0 offset\x184 flags@000
Creating slab buffer_head size\x104 realsize\x176 order=0 offset\x112 flags\x160000
Creating slab names_cache size@96 realsizeB24 order=1 offsetA04 flagsB000
Creating slab dentry size\x192 realsize&4 order=0 offset 0 flags\x160000
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Creating slab inode_cache sizeS6 realsize`8 order=0 offsetT4 flags\x160000
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Creating slab filp size\x184 realsize%6 order=0 offset\x192 flagsB000
Creating slab mnt_cache size#2 realsize84 order=0 offset$0 flagsB000
Mount-cache hash table entries: 4096
Creating slab sysfs_dir_cache sizeÄ realsize\x152 order=0 offsetà flags=0
Creating slab bdev_cache sizex4 realsizeâ6 order=0 offsety2 flags\x162000
Creating slab radix_tree_node sizeU2 realsizeb4 order=0 offsetV0 flags`000
Creating slab sigqueue size\x160 realsize#2 order=0 offset\x168 flags@000
Creating slab proc_inode_cache sizeX4 realsizee6 order=0 offsetY2 flags\x160000
ACPI: Core revision 20091214
Creating slab Acpi-Namespace size2 realsize\x104 order=0 offset@ flags=0
Creating slab Acpi-State sizeÄ realsize\x152 order=0 offsetà flags=0
Creating slab Acpi-Parse sizeH realsize\x120 order=0 offsetV flags=0
Creating slab Acpi-ParseExt sizer realsize\x144 order=0 offsetÄ flags=0
Creating slab Acpi-Operand sizer realsize\x144 order=0 offsetÄ flags=0
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
[...]
Total of 16 processors activated (51118.08 BogoMIPS).
Creating slab shmem_inode_cache sizet4 realsizeÅ6 order=0 offsetu2 flags@000
DMI 2.5 present.
Creating slab file_lock_cache size\x176 realsize$8 order=0 offset\x184 flags@000
Creating slab skbuff_head_cache size 0 realsize84 order=0 offset 8 flagsB000
Creating slab skbuff_fclone_cache size@4 realsizeQ2 order=0 offset@8 flagsB000
Creating slab sock_inode_cache size`8 realsizev8 order=0 offseta6 flags\x122000
NET: Registered protocol family 16
ACPI: bus type pci registered
Creating slab biovec-16 size%6 realsize84 order=0 offset&4 flagsB000
Creating slab biovec-64 size\x1024 realsize\x1152 order=0 offset\x1032 flagsB000
Creating slab biovec-128 size 48 realsize!76 order=0 offset 56 flagsB000
Creating slab biovec-256 size@96 realsizeB24 order=1 offsetA04 flagsB000
Creating slab bio-0 size\x168 realsize%6 order=0 offset\x176 flags 00
bio: create slab <bio-0> at 0
Creating slab fsnotify_event size\x112 realsize\x184 order=0 offset\x120 flags@000
Creating slab fsnotify_event_holder size$ realsizeñ order=0 offset2 flags@000
Creating slab blkdev_ioc sizeÄ realsize\x152 order=0 offsetà flags@000
Creating slab blkdev_requests size36 realsize@8 order=0 offset44 flags@000
Creating slab blkdev_queue size!84 realsize"56 order=0 offset!92 flags@000
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
[... PCI info]
vgaarb: device added: PCI:0000:8d:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
Creating slab scsi_data_buffer size$ realsizeñ order=0 offset2 flags=0
Creating slab sgpool-8 size%6 realsize84 order=0 offset&4 flags 00
Creating slab sgpool-16 sizeQ2 realsized0 order=0 offsetR0 flags 00
Creating slab sgpool-32 size\x1024 realsize\x1152 order=0 offset\x1032 flags 00
Creating slab sgpool-64 size 48 realsize!76 order=0 offset 56 flags 00
Creating slab sgpool-128 size@96 realsizeB24 order=1 offsetA04 flags 00
SCSI subsystem initialized
libata version 3.00 loaded.
IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8020003000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120002000 IOVA space 1024Mb at 0x40000000
IOC: sx2000 0.1 HPA 0xf8120003000 IOVA space 1024Mb at 0x40000000
DMA-API: preallocated 65536 debug entries
DMA-API: debugging enabled by kernel config
Switching to clocksource itc
Creating slab eventpoll_epi size\x128 realsize%6 order=0 offset\x136 flagsB000
Creating slab eventpoll_pwq sizer realsize\x144 order=0 offsetÄ flags@000
pnp: PnP ACPI init
ACPI: bus type pnp registered
GSI 17 (level, low) -> CPU 2 (0x0400) vector 50
GSI 18 (edge, low) -> CPU 3 (0x0500) vector 51
GSI 19 (edge, low) -> CPU 4 (0x0800) vector 52
GSI 20 (edge, low) -> CPU 5 (0x0900) vector 53
GSI 23 (level, low) -> CPU 6 (0x0c00) vector 54
GSI 126 (edge, low) -> CPU 15 (0x0d01) vector 55
GSI 127 (edge, low) -> CPU 8 (0x0001) vector 56
GSI 128 (edge, low) -> CPU 9 (0x0101) vector 57
pnp: PnP ACPI: found 36 devices
ACPI: ACPI bus type pnp unregistered
Creating slab TCP size\x1440 realsize\x1536 order=0 offset\x1448 flagsÇ000
Creating slab request_sock_TCP sizeñ realsize%6 order=0 offset\x104 flags 00
Creating slab tw_sock_TCP size\x152 realsize%6 order=0 offset\x160 flagsÇ000
Creating slab UDP sizeq2 realsizeâ6 order=0 offsetr0 flagsÇ000
Creating slab RAW sizeh8 realsizev8 order=0 offseti6 flags 00
NET: Registered protocol family 2
Creating slab arp_cache size!2 realsize84 order=0 offset!6 flagsB000
Creating slab ip_dst_cache size28 realsizeQ2 order=0 offset36 flagsB000
IP route cache hash table entries: 524288 (order: 6, 4194304 bytes)
Creating slab ip_fib_hash sizer realsize\x144 order=0 offsetÄ flags@000
Creating slab ip_fib_alias size2 realsize\x104 order=0 offset@ flags@000
Creating slab xfrm_dst_cache size60 realsizeQ2 order=0 offset68 flagsB000
Creating slab secpath_cache sizeV realsize\x128 order=0 offsetd flagsB000
Creating slab inet_peer_cache sized realsize\x192 order=0 offsetr flagsB000
Creating slab tcp_bind_bucket size2 realsize\x128 order=0 offset@ flagsB000
TCP established hash table entries: 524288 (order: 7, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 4, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 4, 1048576 bytes)
Creating slab UDP-Lite sizeq2 realsizeâ6 order=0 offsetr0 flagsÇ000
Creating slab UNIX sizeg2 realsizev8 order=0 offseth0 flags 00
NET: Registered protocol family 1
PCI: CLS 128 bytes, default 128
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5824kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Creating slab ia64_partial_page_cache sizeH realsize\x120 order=0 offsetV flags@000
Please use IA-32 EL for executing IA-32 binaries
Creating slab uid_cache sizeÄ realsize%6 order=0 offsetà flagsB000
Creating slab posix_timers_cache size\x144 realsize!6 order=0 offset\x152 flags@000
Creating slab nsproxy sizeH realsize\x120 order=0 offsetV flags@000
HugeTLB registered 256 MB page size, pre-allocated 0 pages
Creating slab fasync_cache size$ realsizeñ order=0 offset2 flags@000
Creating slab dnotify_struct size2 realsize\x104 order=0 offset@ flags@000
Creating slab dnotify_mark size\x128 realsize 0 order=0 offset\x136 flags@000
Creating slab inotify_inode_mark size\x128 realsize 0 order=0 offset\x136 flags@000
Creating slab inotify_event_private_data size2 realsize\x104 order=0 offset@ flags@000
Creating slab fsnotify_mark size\x120 realsize\x192 order=0 offset\x128 flags@000
Creating slab fanotify_response_event size2 realsize\x104 order=0 offset@ flags@000
Creating slab kiocb size 0 realsize84 order=0 offset 8 flagsB000
Creating slab kioctx size20 realsizeQ2 order=0 offset28 flagsB000
Creating slab ext3_xattr sizeà realsize\x160 order=0 offsetñ flags\x120000
Creating slab ext3_inode_cache sizev8 realsizeÑ0 order=0 offsetw6 flags\x120000
Creating slab ext2_xattr sizeà realsize\x160 order=0 offsetñ flags\x120000
Creating slab ext2_inode_cache sizet4 realsizeÅ6 order=0 offsetu2 flags\x120000
Creating slab revoke_record size$ realsizeñ order=0 offset2 flags"000
Creating slab revoke_table size\x16 realsizeà order=0 offset$ flags 000
Creating slab journal_head size\x112 realsize\x184 order=0 offset\x120 flags 000
Creating slab journal_handle size$ realsizeñ order=0 offset2 flags 000
Creating slab hugetlbfs_inode_cache sizeU2 realsizeb4 order=0 offsetV0 flags=0
Creating slab fat_cache size2 realsize\x104 order=0 offset@ flags\x120000
Creating slab fat_inode_cache sizea6 realsizeh8 order=0 offsetb4 flags\x120000
msgmni has been set to 32768
Creating slab mqueue_inode_cache sizeÇ4 realsizeâ6 order=0 offsetÉ2 flags 00
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
Creating slab cfq_queue size'2 realsize44 order=0 offset(0 flags=0
Creating slab cfq_io_context size\x136 realsize 8 order=0 offset\x144 flags=0
io scheduler cfq registered (default)
hpet0: at MMIO 0xffff6030000, IRQs 51, 52, 53
hpet0: 3 comparators, 64-bit 267.000025 MHz counter
hpet1: at MMIO 0xffff60b0000, IRQs 55, 56, 57
hpet1: 3 comparators, 64-bit 267.000025 MHz counter
EFI Time Services Driver v0.4
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at MMIO 0xffc30064000 (irq = 54) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Creating slab sd_ext_cdb size2 realsize\x104 order=0 offset@ flags=0
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[...]
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
GSI 25 (level, low) -> CPU 6 (0x0c00) vector 94
mptspi 0000:00:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 94
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQî
Creating slab scsi_cmd_cache size#2 realsize84 order=0 offset$0 flags 00
Creating slab scsi_sense_cache sizeñ realsize%6 order=0 offset\x104 flags 00
scsi 0:0:6:0: Direct-Access HP 73.4G ST373455LC HPC8 PQ: 0 ANSI: 3
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 0:0:6:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:6:0: [sda] Write Protect is off
sd 0:0:6:0: [sda] Mode Sense: d3 00 10 08
sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
GSI 26 (level, low) -> CPU 7 (0x0d00) vector 95
mptspi 0000:00:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 95
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev\x01032346h, Ports=1, MaxQ%5, IRQï
sda1 sda2 sda3
sd 0:0:6:0: [sda] Attached SCSI disk
scsi 1:0:2:0: CD-ROM Optiarc DVD RW AD-5170A 1.32 PQ: 0 ANSI: 2
target1:0:2: Beginning Domain Validation
target1:0:2: Domain Validation skipping write tests
target1:0:2: Ending Domain Validation
target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 14)
GSI 27 (level, low) -> CPU 0 (0x0000) vector 96
[...]
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
Creating slab flow_cache sizeñ realsize\x168 order=0 offset\x104 flags@000
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1984kB freed
doing fast boot
FATAL: Module mptspi not found.
FATAL: Module jbd not found.
FATAL: Module ext3 not found.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
udevd version 128 started
[...]
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-35001d38000048bd8-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-35001d38000048bd8-part2 /root
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
preping 82-remount.sh
running 82-remount.sh
preping 91-createfb.sh
running 91-createfb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
preping 93-boot.sh
running 93-boot.sh
mount: can't find /root/proc in /etc/fstab or /etc/mtab
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Remounting tmpfs at /dev done
Initializing /dev done
Mounting devpts at /dev/pts done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPF]
sd 0:0:6:0: Attached scsi generic sg0 type 0
scsi 1:0:2:0: Attached scsi generic sg1 type 5
sd 2:0:6:0: Attached scsi generic sg2 type 0
sd 4:0:6:0: Attached scsi generic sg3 type 0
scsi 5:0:2:0: Attached scsi generic sg4 type 5
sd 6:0:6:0: Attached scsi generic sg5 type 0
Creating slab kmalloc_dma-512 sizeQ2 realsizeX4 order=0 offsetR0 flags@004000
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Bad address on kfree a‡0007861f1b0000 page†7fffffff96cde8
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp‡000706296ffc20 bsp‡000706296f1278
[<a0000001007d00a0>] dump_stack+0x30/0x50
sp‡000706296ffdf0 bsp‡000706296f1260
[<a0000001001ae8e0>] kfree+0xe0/0x260
sp‡000706296ffdf0 bsp‡000706296f1230
[<a000000207dd1df0>] sr_probe+0xad0/0xf20 [sr_mod]
sp‡000706296ffdf0 bsp‡000706296f11c8
[<a00000010048ac40>] driver_probe_device+0x180/0x300
sp‡000706296ffe20 bsp‡000706296f1190
[<a00000010048aea0>] __driver_attach+0xe0/0x140
sp‡000706296ffe20 bsp‡000706296f1160
[<a0000001004898a0>] bus_for_each_dev+0xa0/0x140
sp‡000706296ffe20 bsp‡000706296f1128
[<a00000010048a860>] driver_attach+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1108
[<a000000100488780>] bus_add_driver+0x180/0x520
sp‡000706296ffe30 bsp‡000706296f10c0
[<a00000010048b660>] driver_register+0x260/0x400
sp‡000706296ffe30 bsp‡000706296f1078
[<a0000001004df640>] scsi_register_driver+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp‡000706296ffe30 bsp‡000706296f1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp‡000706296ffe30 bsp‡000706296f0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp‡000706296ffe30 bsp‡000706296f0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp‡000706296ffe30 bsp‡000706296f0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp‡00070629700000 bsp‡000706296f0f78
Uniform CD-ROM driver Revision: 3.20
sr 1:0:2:0: Attached scsi CD-ROM sr0
modprobe[6067]: NaT consumption 17179869216 [1]
Modules linked in: sr_mod(+) sg button container(+) usbhid ohci_hcd ehci_hcd usbcore fan thermal processor thermal_sys
Pid: 6067, CPU 9, comm: modprobe
psr : 0000101008522010 ifs : 8000000000000814 ip : [<a0000001001ac900>] Not tainted (2.6.33-rc3-next-20100111-dirty)
ip is at __slab_alloc+0x80/0xca0
unat: 0000000000000000 pfs : 000000000000038c rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : aa99aaa6aa565699
ldrs: 0000000000000000 ccv : 00000000000000c2 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001001af8e0 b6 : a0000001003623a0 b7 : a00000010046df40
f6 : 1003e0000000000000000 f7 : 1003e0a7c5ac471b47843
f8 : 1003e0000000000000000 f9 : 1003effffffffffffff98
f10 : 10003b7ffffffff158148 f11 : 1003e0000000000000000
r1 : a0000001014480f0 r2 : 0000000000000009 r3 : a00000010125f6c0
r8 : a0000001010375f0 r9 : 0000000000000001 r10 : ffffffffffff6690
r11 : 00000000003fffff r12 : e0000706296ffde0 r13 : e0000706296f0000
r14 : e000078000026698 r15 : e000078000030000 r16 : a0000001011553a8
r17 : 0000000000000f3d r18 : 0000000000000800 r19 : e000078603e3d6a0
r20 : 0000000000000000 r21 : 0000000000000031 r22 : a000000101037608
r23 : 0000000afffffffb r24 : 0000000000000005 r25 : 0000000000000000
r26 : 0000000000000000 r27 : 0000000000000000 r28 : 0000000000000001
r29 : 0000000000000000 r30 : 0000000000000000 r31 : 0000000000000000
Call Trace:
[<a000000100016950>] show_stack+0x50/0xa0
sp‡000706296ff830 bsp‡000706296f1430
[<a0000001000171c0>] show_regs+0x820/0x860
sp‡000706296ffa00 bsp‡000706296f13d0
[<a00000010003bc40>] die+0x1a0/0x300
sp‡000706296ffa00 bsp‡000706296f1390
[<a00000010003bdf0>] die_if_kernel+0x50/0x80
sp‡000706296ffa00 bsp‡000706296f1360
[<a00000010003cfe0>] ia64_fault+0x11c0/0x1280
sp‡000706296ffa00 bsp‡000706296f1308
[<a00000010000c8a0>] ia64_native_leave_kernel+0x0/0x270
sp‡000706296ffc10 bsp‡000706296f1308
[<a0000001001ac900>] __slab_alloc+0x80/0xca0
sp‡000706296ffde0 bsp‡000706296f1268
[<a0000001001af8e0>] __kmalloc+0x1c0/0x280
sp‡000706296ffdf0 bsp‡000706296f1230
[<a000000207dd16d0>] sr_probe+0x3b0/0xf20 [sr_mod]
sp‡000706296ffdf0 bsp‡000706296f11c8
[<a00000010048ac40>] driver_probe_device+0x180/0x300
sp‡000706296ffe20 bsp‡000706296f1190
[<a00000010048aea0>] __driver_attach+0xe0/0x140
sp‡000706296ffe20 bsp‡000706296f1160
[<a0000001004898a0>] bus_for_each_dev+0xa0/0x140
sp‡000706296ffe20 bsp‡000706296f1128
[<a00000010048a860>] driver_attach+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1108
[<a000000100488780>] bus_add_driver+0x180/0x520
sp‡000706296ffe30 bsp‡000706296f10c0
[<a00000010048b660>] driver_register+0x260/0x400
sp‡000706296ffe30 bsp‡000706296f1078
[<a0000001004df640>] scsi_register_driver+0x40/0x60
sp‡000706296ffe30 bsp‡000706296f1058
[<a000000207e00070>] init_sr+0x70/0x140 [sr_mod]
sp‡000706296ffe30 bsp‡000706296f1038
[<a00000010000a960>] do_one_initcall+0xe0/0x360
sp‡000706296ffe30 bsp‡000706296f0ff0
[<a000000100106040>] sys_init_module+0x1e0/0x4c0
sp‡000706296ffe30 bsp‡000706296f0f78
[<a00000010000c700>] ia64_ret_from_syscall+0x0/0x20
sp‡000706296ffe30 bsp‡000706296f0f78
[<a000000000010720>] __kernel_syscall_via_break+0x0/0x20
sp‡00070629700000 bsp‡000706296f0f78
Disabling lock debugging due to kernel taint
udevd-event[6066]: '/sbin/modprobe' abnormal exit
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 2104384k swap on /dev/sda2. Priority:-1 extents:1 across:2104done
Setting up the hardware clock done
Activating device mapper...
Creating slab dm_io size@ realsize\x112 order=0 offsetH flags=0
Creating slab dm_target_io size$ realsizeñ order=0 offset2 flags=0
Creating slab dm_rq_target_io size76 realsizeD8 order=0 offset84 flags=0
Creating slab dm_rq_clone_bio_info size\x16 realsizeà order=0 offset$ flags=0
Creating slab io sized realsize\x192 order=0 offsetr flags=0
Creating slab kcopyd_job size84 realsizeE6 order=0 offset92 flags=0
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
Checking all file systems. done
done
Mounting local file systems...
[...]
Welcome to SUSE Linux Enterprise Server 11 (ia64) - Kernel 2.6.33-rc3-next-20100111-dirty (console).
coffee0 login:
--
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-01-21 21:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100113002923.GF2985@ldl.fc.hp.com>
2010-01-13 14:59 ` SLUB ia64 linux-next crash bisected to 756dee75 Christoph Lameter
2010-01-14 0:53 ` Alex Chiang
2010-01-14 15:01 ` Christoph Lameter
2010-01-14 18:01 ` Alex Chiang
2010-01-14 15:18 ` Christoph Lameter
2010-01-14 18:22 ` Alex Chiang
2010-01-14 19:17 ` Pekka Enberg
2010-01-14 20:32 ` Alex Chiang
2010-01-14 20:58 ` Christoph Lameter
2010-01-14 21:29 ` Alex Chiang
2010-01-14 21:31 ` Pekka Enberg
2010-01-14 21:59 ` Christoph Lameter
2010-01-14 22:01 ` Christoph Lameter
2010-01-15 20:07 ` Christoph Lameter
2010-01-15 20:35 ` Lee Schermerhorn
2010-01-15 23:32 ` Christoph Lameter
2010-01-19 18:53 ` Christoph Lameter
2010-01-19 20:02 ` Alex Chiang
2010-01-19 20:29 ` Christoph Lameter
2010-01-19 21:29 ` Alex Chiang
2010-01-19 21:50 ` Christoph Lameter
2010-01-20 22:46 ` Alex Chiang
2010-01-21 21:47 ` Alex Chiang [this message]
2010-01-21 22:45 ` Christoph Lameter
2010-01-21 23:05 ` Alex Chiang
2010-01-21 23:43 ` Christoph Lameter
2010-01-22 0:15 ` Alex Chiang
2010-01-22 14:43 ` Christoph Lameter
2010-01-22 16:37 ` Pekka Enberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100121214749.GJ17684@ldl.fc.hp.com \
--to=achiang@hp.com \
--cc=Lee.Schermerhorn@hp.com \
--cc=cl@linux-foundation.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=penberg@cs.helsinki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox