From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Karthik Gopalakrishnan" Date: Thu, 09 Nov 2006 13:22:59 +0000 Subject: Re: elilo.efi causing Kernel Panic Message-Id: <5e0a1fd80611090510i794bb96h30d45787bae459f5@mail.gmail.com> List-Id: References: <20061109124221.GL16952@parisc-linux.org> In-Reply-To: <20061109124221.GL16952@parisc-linux.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org When I booted from the original elilo.efi binary, the console log was a bit different. I have listed it below. My efi binary seems to have detected some RAM Disk when this one doesn't. Hope this helps. Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 384kB freed Red Hat nash version 4.2.1.6 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading mptbase.ko module Fusion MPT base driver 3.02.18 On 11/9/06, Karthik Gopalakrishnan wrote: > Hi Matthew. > > Here is the complete listing. Sorry about the verbose information. > > ---------------------------------- > > fs0:\EFI\redhat> elilo > > ELILO boot: Uncompressing Linux... done > Loading initrd initrd-2.6.9-22.EL.img...done > Linux version 2.6.9-22.EL (bhcompile@boris.devel.redhat.com) (gcc > version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 17:54:55 > EDT 2005 > EFI v1.10 by HP: SALsystab=0x743fcf1a938 ACPI 2.0=0x743fd310000 > HCDP=0x743fd341838 SMBIOS=0x7fffe000 > booting generic kernel on platform hpzx1 > Number of logical nodes in system = 2 > Number of memory chunks in system = 4 > warning: skipping physical page 0 > efi.trim_top: ignoring 1288KB of memory at 0x40febfe000 due to granule > hole at 0x40ff000000 > efi.trim_top: ignoring 32KB of memory at 0x40ff142000 due to granule > hole at 0x40ff000000 > efi.trim_top: ignoring 8KB of memory at 0x40ff14a000 due to granule > hole at 0x40ff000000 > efi.trim_top: ignoring 4808KB of memory at 0x40ff14c000 due to granule > hole at 0x40ff000000 > efi.trim_top: ignoring 2664KB of memory at 0x40ff5fe000 due to granule > hole at 0x40ff000000 > efi.trim_top: ignoring 248KB of memory at 0x40ff898000 due to granule > hole at 0x40ff000000 > efi.trim_top: ignoring 784KB of memory at 0x40ff912000 due to granule > hole at 0x40ff000000 > efi.trim_top: ignoring 1368KB of memory at 0x40ffa7e000 due to granule > hole at 0x40ff000000 > warning: skipping physical page 0 > warning: skipping physical page 0 > Initial ramdisk at: 0xe0000040fe9fb000 (1708032 bytes) > SAL 3.20: HP Orca/IPF version 6.26 > SAL Platform features: None > SAL: AP wakeup using external interrupt vector 0xff > ACPI: Local APIC address c0000000fee00000 > GSI 16 (level, low) -> CPU 0 (0x0002) vector 48 > 8 CPUs available, 8 CPUs total > PCDP: v3 at 0xe0000743fd341838 > PCDP: serial console at MMIO 0xf0200040000 (ttyS0, options 9600n8) > MCA related initialization done > warning: skipping physical page 0 > Virtual mem_map starts at 0xa0007fffc720c000 > Built 1 zonelists > Kernel command line: BOOT_IMAGE=scsi0:\EFI\redhat\vmlinuz-2.6.9-22.EL > console=ttyS0 rhgb root=LABEL=/ ro > PID hash table entries: 4096 (order: 12, 131072 bytes) > Console: colour dummy device 80x25 > Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes) > Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes) > Memory: 16593664k/16682912k available (5611k code, 101232k reserved, > 2260k data, 384k init) > McKinley Errata 9 workaround not needed; disabling it > Security Scaffold v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > There is already a security framework initialized, register_security failed. > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 1024 (order: 0, 16384 bytes) > Boot processor id 0x0/0x2 > task migration cache decay timeout: 10 msecs. > CPU 1: synchronized ITC with CPU 0 (last diff 5 cycles, maxerr 443 cycles) > CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 763 cycles) > CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 763 cycles) > CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles) > CPU 5: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 1764 cycles) > CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles) > CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles) > Brought up 8 CPUs > Total of 8 processors activated (13160.32 BogoMIPS). > checking if image is initramfs...it isn't (ungzip failed); looks like an initrd > Freeing initrd memory: 1664kB freed > NET: Registered protocol family 16 > ACPI: Subsystem revision 20040816 > ACPI: Interpreter enabled > ACPI: Using IOSAPIC for interrupt routing > ACPI: PCI Root Bridge [L000] (02:00) > ACPI: PCI Root Bridge [L001] (02:15) > ACPI: PCI Root Bridge [L002] (02:2a) > ACPI: PCI Root Bridge [L003] (02:3f) > ACPI: PCI Root Bridge [L004] (02:54) > ACPI: PCI Root Bridge [L006] (02:69) > ACPI: PCI Root Bridge [L008] (02:7e) > ACPI: PCI Root Bridge [L009] (02:93) > ACPI: PCI Root Bridge [L010] (02:a8) > ACPI: PCI Root Bridge [L011] (02:be) > ACPI: PCI Root Bridge [L012] (02:d4) > ACPI: PCI Root Bridge [L014] (02:ea) > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > GSI 24 (level, low) -> CPU 1 (0x0102) vector 49 > ACPI: PCI interrupt 0002:00:00.0[A] -> GSI 24 (level, low) -> IRQ 49 > ACPI: PCI interrupt 0002:00:01.0[A] -> GSI 24 (level, low) -> IRQ 49 > GSI 35 (level, low) -> CPU 2 (0x0402) vector 50 > ACPI: PCI interrupt 0002:15:01.0[A] -> GSI 35 (level, low) -> IRQ 50 > GSI 36 (level, low) -> CPU 3 (0x0502) vector 51 > ACPI: PCI interrupt 0002:15:01.1[B] -> GSI 36 (level, low) -> IRQ 51 > GSI 57 (level, low) -> CPU 4 (0x0802) vector 52 > ACPI: PCI interrupt 0002:40:04.0[A] -> GSI 57 (level, low) -> IRQ 52 > GSI 58 (level, low) -> CPU 5 (0x0902) vector 53 > ACPI: PCI interrupt 0002:40:04.1[B] -> GSI 58 (level, low) -> IRQ 53 > GSI 59 (level, low) -> CPU 6 (0x0c02) vector 54 > ACPI: PCI interrupt 0002:40:06.0[A] -> GSI 59 (level, low) -> IRQ 54 > GSI 60 (level, low) -> CPU 7 (0x0d02) vector 55 > ACPI: PCI interrupt 0002:40:06.1[B] -> GSI 60 (level, low) -> IRQ 55 > GSI 90 (level, low) -> CPU 0 (0x0002) vector 56 > ACPI: PCI interrupt 0002:7e:01.0[A] -> GSI 90 (level, low) -> IRQ 56 > GSI 145 (level, low) -> CPU 1 (0x0102) vector 57 > ACPI: PCI interrupt 0002:eb:04.0[A] -> GSI 145 (level, low) -> IRQ 57 > GSI 146 (level, low) -> CPU 2 (0x0402) vector 58 > ACPI: PCI interrupt 0002:eb:04.1[B] -> GSI 146 (level, low) -> IRQ 58 > GSI 147 (level, low) -> CPU 3 (0x0502) vector 59 > ACPI: PCI interrupt 0002:eb:06.0[A] -> GSI 147 (level, low) -> IRQ 59 > GSI 148 (level, low) -> CPU 4 (0x0802) vector 60 > ACPI: PCI interrupt 0002:eb:06.1[B] -> GSI 148 (level, low) -> IRQ 60 > IOC: sx1000 0.1 HPA 0xf8220002000 IOVA space 1024Mb at 0x80000000 > IOC: sx1000 0.1 HPA 0xf8220003000 IOVA space 1024Mb at 0x80000000 > perfmon: version 2.0 IRQ 238 > perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) > PAL Information Facility v0.5 > perfmon: added sampling format default_format > perfmon_default_smpl: default_format v2.0 registered > audit: initializing netlink socket (disabled) > audit(1163076642.940:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) > SELinux: Registering netfilter hooks > Initializing Cryptographic API > ksign: Installing public key data > Loading keyring > - Added public key 453B8631FE6159D3 > - User ID: Red Hat, Inc. (Kernel Module GPG key) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ACPI: Processor [P016] (supports C1) > ACPI: Processor [P017] (supports C1) > ACPI: Processor [P018] (supports C1) > ACPI: Processor [P019] (supports C1) > ACPI: Processor [P020] (supports C1) > ACPI: Processor [P021] (supports C1) > ACPI: Processor [P022] (supports C1) > ACPI: Processor [P023] (supports C1) > EFI Time Services Driver v0.4 > Linux agpgart interface v0.100 (c) Dave Jones > i8042.c: No controller found. > Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled > tyS0 at MMIO 0xf0200040000 (irq = 49) is a 16550A > ACPI: PCI interrupt 0002:00:00.0[A] -> GSI 24 (level, low) -> IRQ 49 > ttyS1 at MMIO 0xf0200040008 (irq = 49) is a 16550A > ttyS2 at MMIO 0xf0200040010 (irq = 49) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ide-floppy driver 0.99.newide > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > mice: PS/2 mouse device common for all mice > md: md driver 0.90.0 MAX_MD_DEVS%6, MD_SB_DISKS' > EFI Variables Facility v0.08 2004-May-17 > NET: Registered protocol family 2 > IP: routing cache hash table of 262144 buckets, 4096Kbytes > TCP: Hash tables configured (established 8388608 bind 65536) > Initializing IPsec netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > RAMDISK: Compressed image found at block 0 > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) > > ---------------------------------- > > On 11/9/06, Matthew Wilcox wrote: > > On Thu, Nov 09, 2006 at 06:04:04PM +0530, Karthik Gopalakrishnan wrote: > > > image=vmlinuz-2.6.9-22.EL > > > label=linux > > > initrd=initrd-2.6.9-22.EL.img > > > read-only > > > append="console=ttyS0 rhgb quiet root=LABEL=/" > > > > If you take the "quiet" out, you'll get a lot more information during > > the boot, and we may be able to diagnose your problem. > > > > > fs0:\EFI\redhat> elilo > > > > > > ELILO boot: Uncompressing Linux... done > > > Loading initrd initrd-2.6.9-22.EL.img...done > > > i8042.c: No controller found. > > > ernel panic - not syncing: VFS: Unable to mount root fs on > > > unknown-block(0,0) > > > > > > Any help will be greatly appreciated. > > > > > > Regards, > > > Karthik > > > - > > > To unsubscribe from this list: send the line "unsubscribe linux-ia64" in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > >