From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Chris Hyser" Date: Thu, 18 May 2000 18:11:20 +0000 Subject: RE: [Linux-ia64] How do I set variables in efishell? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org Hi All, > -----Original Message----- > From: linux-ia64-admin@linuxia64.org > [mailto:linux-ia64-admin@linuxia64.org]On Behalf Of Christoph Rohland > Sent: Tuesday, May 09, 2000 3:02 AM > To: linux-ia64@linuxia64.org > Subject: [Linux-ia64] How do I set variables in efishell? > > > Hi all, > > I still do not know how to set variables in efishell to switch the > console to my serial device. > > I actually know that I have to set the variables ConIn and ConOut. But > I am prettty confused by any documentation I can find about actually > setting these variables. > > Any help appreciated Has anybody figured this out yet? Specifically, there is a "set" command in the EFI shell, but the difficulty seems to be figuring out the device path to actually set the variables to. Then of course this early firmware may end up ignoring them anyway. Thoughts? --- Best Regards Chris Hyser Hewlett-Packard