From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan_Kwahk@Dell.com Date: Tue, 29 Aug 2000 19:20:38 +0000 Subject: RE: [Fwd: [Fwd: [Linux-ia64] ia64 redhat 7 beta]] Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org I have seen issues where entering the QLogic SCSI BIOS utility would hang the system. However, with the recent BIOS builds, I was able to enter the set up with no hangs and configure the SCSI drives. I think I used build 60. J -----Original Message----- From: Uros Prestor [mailto:uros@turbolinux.com] Sent: Tuesday, August 29, 2000 1:53 PM To: dbb@sco.com Cc: Matt_Domsch@exchange.dell.com; linux-ia64@linuxia64.org Subject: Re: [Fwd: [Fwd: [Linux-ia64] ia64 redhat 7 beta]] Doug Beattie wrote: > 1. Does anyone else have a problem getting into the Qlogic Fast!Util > on their IA64 system? Yes. Don't bother entering Qlogic setup on BigSurs -- the system will hang. > I have to place the card into a 32 bit system to access the bios and > make a change, then place it back into my BigSur to try it. I was able to boot both test6 and test7 kernels on BigSurs without any Qlogic BIOS changes. I had to enable >4G addressing on Lion systems when booting test6 kernels. Uros -- Uros Prestor uros@turbolinux.com _______________________________________________ Linux-IA64 mailing list Linux-IA64@linuxia64.org http://lists.linuxia64.org/lists/listinfo/linux-ia64