From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Luck, Tony" Date: Wed, 16 Jan 2002 18:21:34 +0000 Subject: RE: [Linux-ia64] PXE Boot Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org Mike, I saw the same thing a few months ago when I tried it (even when I replaced the elilo.efi with a 1-byte file, I still got the same error ... so the size of the file isn't the issue). I didn't get around to chasing this ... but I wondered whether there was a failure to communicate the size correctly between the boot server that I was using (Lion running linux ... I forget which versions of dhcp and tftpd were present, and that machine has been re-installed so I can't check) and the bigsur that I was trying to boot. -Tony Luck -----Original Message----- From: Michael Madore [mailto:mmadore@turbolinux.com] Sent: Wednesday, January 16, 2002 10:57 AM To: linux-ia64@linuxia64.org Subject: [Linux-ia64] PXE Boot Hi, I'm trying to boot a Big Sur workstation (Firmware 117C) via the network. The workstation receives an address via dhcp and when starting to download elilo.efi I get the following error message: PXE-E05: Download buffer is smaller than requested file. Load of PXE boot failed: File not found Does this message really indicate the buffer is to small, or is this a symptom of a different problem? Mike _______________________________________________ Linux-IA64 mailing list Linux-IA64@linuxia64.org http://lists.linuxia64.org/lists/listinfo/linux-ia64