From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alex Williamson Date: Wed, 30 Oct 2002 17:01:53 +0000 Subject: Re: [Linux-ia64] PXE boot off HP zx6000 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org Jason, Here's a know configuration that works: Debian 3.0 server (ia32) tftpd-hpa 0.28-2 dhcp 2.0pl5-11 /etc/inetd.conf: tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -t 1 -s /tftpboot /etc/dhcpd.conf host zx6000 { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address zx6000; filename "elilo.efi"; } You'll need an elilo.conf or some permutation of AABBCCDD.conf, which is your IP in hex (just like pxelinux). Is the kernel file elilo.conf points at stripped? You may want to strip it and gzip it to see if that helps. Look in the logs to see what it's transfered and which file it's getting an error on. Are you loading an initrd as well (what size)? What firmware is on your zx6000 ('info fw' from efi)? Thanks, Alex -- Alex Williamson Linux Development Lab alex_williamson@hp.com Hewlett Packard 970-898-9173 Fort Collins, CO