From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steinar Traedal-Henden Date: Mon, 17 Mar 2003 09:23:50 +0000 Subject: [Linux-ia64] rx2600 HW-error only when running 2.4.20 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org Hi, I get the following HW error on a HP rx2600 when I run my own compiled 2.4.20 kernel. Mar 17 04:13:35 compute-1-0 kernel: +BEGIN HARDWARE ERROR STATE AT CPE Mar 17 04:13:35 compute-1-0 kernel: +Err Record ID: 2833 SAL Rev: 0.02 Mar 17 04:13:35 compute-1-0 kernel: +Time: 03/17/2003 04:19:49 Severity 2 Mar 17 04:13:35 compute-1-0 kernel: +Platform PCI Bus Error Info Section Mar 17 04:13:35 compute-1-0 kernel: + PCI Bus Error Detail: Error Status: 0x4a1700 Error Type: 0x0 Bus ID: 0x80 Bus Address: 0x0 Responder ID: 0xfed28000+END HARDWARE ERROR STATE AT CPE The error appears every 2 minutes in the syslog. The error does not appear when I run either 2.4.18-e.12smp from RedHat or the 2.4.19 version. more system info: [compute-1-0]# cat /etc/redhat-release Red Hat Linux Advanced Workstation release 2.1AW (Derry) [compute-1-0]# gcc -v Reading specs from /usr/lib/gcc-lib/ia64-redhat-linux/2.96/specs gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-112.7.2) Best regards Steinar