From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard C Bilson Date: Mon, 23 Jun 2003 15:16:57 +0000 Subject: i2000 firmware 117c Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org Back in May, Alex Williamson from HP observed: > In short, if you're not up to at least firmware rev 117c on your i2000, > you need to upgraded. The CPE polling between 2.4 & 2.5 should be pretty > much identical. I have an i2000 here that is still running rev 103, and I'd like to upgrade it. Problem is, it has a C1 processor, and the current firmware release (130) requires a C2. Is there any way I can get access to the 117c firmware release? The good news is that 2.5.72 seems to run fine on the box anyway (with CONFIG_MCA disabled, mind you); special thanks to Peter Chubb for fixing the keyboard problem. -- Richard C. Bilson, Research Assistant | School of Computer Science rcbilson@plg.uwaterloo.ca | University of Waterloo http://plg.uwaterloo.ca/~rcbilson | 200 University Avenue West Office: DC 3548F Ph: (519)888-4567x4822 | Waterloo, Ontario, CANADA N2L 3G1