From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christoph Hellwig Date: Sat, 27 Sep 2003 14:07:38 +0000 Subject: [PATCH] more dead headers Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org diff -Nru a/arch/ia64/sn/io/machvec/pci_dma.c b/arch/ia64/sn/io/machvec/pci_dma.c --- a/arch/ia64/sn/io/machvec/pci_dma.c Sat Sep 27 16:05:31 2003 +++ b/arch/ia64/sn/io/machvec/pci_dma.c Sat Sep 27 16:05:31 2003 @@ -29,7 +29,6 @@ #include #include #include -#include /* * For ATE allocations diff -Nru a/include/asm-ia64/sn/fetchop.h b/include/asm-ia64/sn/fetchop.h --- a/include/asm-ia64/sn/fetchop.h Sat Sep 27 16:05:31 2003 +++ b/include/asm-ia64/sn/fetchop.h Sat Sep 27 16:05:31 2003 @@ -1,85 +0,0 @@ -/* - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2001-2003 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_FETCHOP_H -#define _ASM_IA64_SN_FETCHOP_H - -#include - -#define FETCHOP_BASENAME "sgi_fetchop" -#define FETCHOP_FULLNAME "/dev/sgi_fetchop" - - - -#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */ - -#define FETCHOP_LOAD 0 -#define FETCHOP_INCREMENT 8 -#define FETCHOP_DECREMENT 16 -#define FETCHOP_CLEAR 24 - -#define FETCHOP_STORE 0 -#define FETCHOP_AND 24 -#define FETCHOP_OR 32 - -#define FETCHOP_CLEAR_CACHE 56 - -#define FETCHOP_LOAD_OP(addr, op) ( \ - *(volatile long *)((char*) (addr) + (op))) - -#define FETCHOP_STORE_OP(addr, op, x) ( \ - *(volatile long *)((char*) (addr) + (op)) = (long) (x)) - -#ifdef __KERNEL__ - -/* - * Convert a region 6 (kaddr) address to the address of the fetchop variable - */ -#define FETCHOP_KADDR_TO_MSPEC_ADDR(kaddr) TO_MSPEC(kaddr) - - -/* - * Each Atomic Memory Operation (AMO formerly known as fetchop) - * variable is 64 bytes long. The first 8 bytes are used. The - * remaining 56 bytes are unaddressable due to the operation taking - * that portion of the address. - * - * NOTE: The AMO_t _MUST_ be placed in either the first or second half - * of the cache line. The cache line _MUST NOT_ be used for anything - * other than additional AMO_t entries. This is because there are two - * addresses which reference the same physical cache line. One will - * be a cached entry with the memory type bits all set. This address - * may be loaded into processor cache. The AMO_t will be referenced - * uncached via the memory special memory type. If any portion of the - * cached cache-line is modified, when that line is flushed, it will - * overwrite the uncached value in physical memory and lead to - * inconsistency. - */ -typedef struct { - u64 variable; - u64 unused[7]; -} AMO_t; - - -/* - * The following APIs are externalized to the kernel to allocate/free pages of - * fetchop variables. - * fetchop_kalloc_page - Allocate/initialize 1 fetchop page on the - * specified cnode. - * fetchop_kfree_page - Free a previously allocated fetchop page - */ - -unsigned long fetchop_kalloc_page(int nid); -void fetchop_kfree_page(unsigned long maddr); - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IA64_SN_FETCHOP_H */ - diff -Nru a/include/asm-ia64/sn/ifconfig_net.h b/include/asm-ia64/sn/ifconfig_net.h --- a/include/asm-ia64/sn/ifconfig_net.h Sat Sep 27 16:05:31 2003 +++ b/include/asm-ia64/sn/ifconfig_net.h Sat Sep 27 16:05:31 2003 @@ -1,32 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2003 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_IFCONFIG_NET_H -#define _ASM_IA64_SN_IFCONFIG_NET_H - -#define NETCONFIG_FILE "/tmp/ifconfig_net" -#define POUND_CHAR '#' -#define MAX_LINE_LEN 128 -#define MAXPATHLEN 128 - -struct ifname_num { - long next_eth; - long next_fddi; - long next_hip; - long next_tr; - long next_fc; - long size; -}; - -struct ifname_MAC { - char name[16]; - unsigned char dev_addr[7]; - unsigned char addr_len; /* hardware address length */ -}; - -#endif /* _ASM_IA64_SN_IFCONFIG_NET_H */ diff -Nru a/include/asm-ia64/sn/ioc4.h b/include/asm-ia64/sn/ioc4.h --- a/include/asm-ia64/sn/ioc4.h Sat Sep 27 16:05:31 2003 +++ b/include/asm-ia64/sn/ioc4.h Sat Sep 27 16:05:31 2003 @@ -1,801 +0,0 @@ -/* - * Copyright (c) 2002-2003 Silicon Graphics, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, - * Mountain View, CA 94043, or: - * - * http://www.sgi.com - * - */ - -#ifndef _ASM_IA64_SN_IOC4_H -#define _ASM_IA64_SN_IOC4_H - -#if 0 - -/* - * ioc4.h - IOC4 chip header file - */ - -/* Notes: - * The IOC4 chip is a 32-bit PCI device that provides 4 serial ports, - * an IDE bus interface, a PC keyboard/mouse interface, and a real-time - * external interrupt interface. - * - * It includes an optimized DMA buffer management, and a store-and-forward - * buffer RAM. - * - * All IOC4 registers are 32 bits wide. - */ -typedef __uint32_t ioc4reg_t; - -/* - * PCI Configuration Space Register Address Map, use offset from IOC4 PCI - * configuration base such that this can be used for multiple IOC4s - */ -#define IOC4_PCI_ID 0x0 /* ID */ - -#define IOC4_VENDOR_ID_NUM 0x10A9 -#define IOC4_DEVICE_ID_NUM 0x100A -#define IOC4_ADDRSPACE_MASK 0xfff00000ULL - -#define IOC4_PCI_SCR 0x4 /* Status/Command */ -#define IOC4_PCI_REV 0x8 /* Revision */ -#define IOC4_PCI_LAT 0xC /* Latency Timer */ -#define IOC4_PCI_BAR0 0x10 /* IOC4 base address 0 */ -#define IOC4_PCI_SIDV 0x2c /* Subsys ID and vendor */ -#define IOC4_PCI_CAP 0x34 /* Capability pointer */ -#define IOC4_PCI_LATGNTINT 0x3c /* Max_lat, min_gnt, int_pin, int_line */ - -/* - * PCI Memory Space Map - */ -#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */ -#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0) -#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1) -#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5) -#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6) - -/* Master IDs contained in PCI_ERR_ADDR_MST_ID_MSK */ -#define IOC4_MST_ID_S0_TX 0 -#define IOC4_MST_ID_S0_RX 1 -#define IOC4_MST_ID_S1_TX 2 -#define IOC4_MST_ID_S1_RX 3 -#define IOC4_MST_ID_S2_TX 4 -#define IOC4_MST_ID_S2_RX 5 -#define IOC4_MST_ID_S3_TX 6 -#define IOC4_MST_ID_S3_RX 7 -#define IOC4_MST_ID_ATA 8 - -#define IOC4_PCI_ERR_ADDR_H 0x004 /* High Error Address */ - -#define IOC4_SIO_IR 0x008 /* SIO Interrupt Register */ -#define IOC4_OTHER_IR 0x00C /* Other Interrupt Register */ - -/* These registers are read-only for general kernel code. To modify - * them use the functions in ioc4.c - */ -#define IOC4_SIO_IES_RO 0x010 /* SIO Interrupt Enable Set Reg */ -#define IOC4_OTHER_IES_RO 0x014 /* Other Interrupt Enable Set Reg */ -#define IOC4_SIO_IEC_RO 0x018 /* SIO Interrupt Enable Clear Reg */ -#define IOC4_OTHER_IEC_RO 0x01C /* Other Interrupt Enable Clear Reg */ - -#define IOC4_SIO_CR 0x020 /* SIO Control Reg */ -#define IOC4_INT_OUT 0x028 /* INT_OUT Reg (realtime interrupt) */ -#define IOC4_GPCR_S 0x030 /* GenericPIO Cntrl Set Register */ -#define IOC4_GPCR_C 0x034 /* GenericPIO Cntrl Clear Register */ -#define IOC4_GPDR 0x038 /* GenericPIO Data Register */ -#define IOC4_GPPR_0 0x040 /* GenericPIO Pin Registers */ -#define IOC4_GPPR_OFF 0x4 -#define IOC4_GPPR(x) (IOC4_GPPR_0+(x)*IOC4_GPPR_OFF) - -/* ATAPI Registers */ -#define IOC4_ATA_0 0x100 /* Data w/timing */ -#define IOC4_ATA_1 0x104 /* Error/Features w/timing */ -#define IOC4_ATA_2 0x108 /* Sector Count w/timing */ -#define IOC4_ATA_3 0x10C /* Sector Number w/timing */ -#define IOC4_ATA_4 0x110 /* Cyliner Low w/timing */ -#define IOC4_ATA_5 0x114 /* Cylinder High w/timing */ -#define IOC4_ATA_6 0x118 /* Device/Head w/timing */ -#define IOC4_ATA_7 0x11C /* Status/Command w/timing */ -#define IOC4_ATA_0_AUX 0x120 /* Aux Status/Device Cntrl w/timing */ -#define IOC4_ATA_TIMING 0x140 /* Timing value register 0 */ -#define IOC4_ATA_DMA_PTR_L 0x144 /* Low Memory Pointer to DMA List */ -#define IOC4_ATA_DMA_PTR_H 0x148 /* High Memory Pointer to DMA List */ -#define IOC4_ATA_DMA_ADDR_L 0x14C /* Low Memory DMA Address */ -#define IOC4_ATA_DMA_ADDR_H 0x150 /* High Memory DMA Addresss */ -#define IOC4_ATA_BC_DEV 0x154 /* DMA Byte Count at Device */ -#define IOC4_ATA_BC_MEM 0x158 /* DMA Byte Count at Memory */ -#define IOC4_ATA_DMA_CTRL 0x15C /* DMA Control/Status */ - -/* Keyboard and Mouse Registers */ -#define IOC4_KM_CSR 0x200 /* Kbd and Mouse Cntrl/Status Reg */ -#define IOC4_K_RD 0x204 /* Kbd Read Data Register */ -#define IOC4_M_RD 0x208 /* Mouse Read Data Register */ -#define IOC4_K_WD 0x20C /* Kbd Write Data Register */ -#define IOC4_M_WD 0x210 /* Mouse Write Data Register */ - -/* Serial Port Registers used for DMA mode serial I/O */ -#define IOC4_SBBR01_H 0x300 /* Serial Port Ring Buffers - Base Reg High for Channels 0 1*/ -#define IOC4_SBBR01_L 0x304 /* Serial Port Ring Buffers - Base Reg Low for Channels 0 1 */ -#define IOC4_SBBR23_H 0x308 /* Serial Port Ring Buffers - Base Reg High for Channels 2 3*/ -#define IOC4_SBBR23_L 0x30C /* Serial Port Ring Buffers - Base Reg Low for Channels 2 3 */ - -#define IOC4_SSCR_0 0x310 /* Serial Port 0 Control */ -#define IOC4_STPIR_0 0x314 /* Serial Port 0 TX Produce */ -#define IOC4_STCIR_0 0x318 /* Serial Port 0 TX Consume */ -#define IOC4_SRPIR_0 0x31C /* Serial Port 0 RX Produce */ -#define IOC4_SRCIR_0 0x320 /* Serial Port 0 RX Consume */ -#define IOC4_SRTR_0 0x324 /* Serial Port 0 Receive Timer Reg */ -#define IOC4_SHADOW_0 0x328 /* Serial Port 0 16550 Shadow Reg */ - -#define IOC4_SSCR_1 0x32C /* Serial Port 1 Control */ -#define IOC4_STPIR_1 0x330 /* Serial Port 1 TX Produce */ -#define IOC4_STCIR_1 0x334 /* Serial Port 1 TX Consume */ -#define IOC4_SRPIR_1 0x338 /* Serial Port 1 RX Produce */ -#define IOC4_SRCIR_1 0x33C /* Serial Port 1 RX Consume */ -#define IOC4_SRTR_1 0x340 /* Serial Port 1 Receive Timer Reg */ -#define IOC4_SHADOW_1 0x344 /* Serial Port 1 16550 Shadow Reg */ - -#define IOC4_SSCR_2 0x348 /* Serial Port 2 Control */ -#define IOC4_STPIR_2 0x34C /* Serial Port 2 TX Produce */ -#define IOC4_STCIR_2 0x350 /* Serial Port 2 TX Consume */ -#define IOC4_SRPIR_2 0x354 /* Serial Port 2 RX Produce */ -#define IOC4_SRCIR_2 0x358 /* Serial Port 2 RX Consume */ -#define IOC4_SRTR_2 0x35C /* Serial Port 2 Receive Timer Reg */ -#define IOC4_SHADOW_2 0x360 /* Serial Port 2 16550 Shadow Reg */ - -#define IOC4_SSCR_3 0x364 /* Serial Port 3 Control */ -#define IOC4_STPIR_3 0x368 /* Serial Port 3 TX Produce */ -#define IOC4_STCIR_3 0x36C /* Serial Port 3 TX Consume */ -#define IOC4_SRPIR_3 0x370 /* Serial Port 3 RX Produce */ -#define IOC4_SRCIR_3 0x374 /* Serial Port 3 RX Consume */ -#define IOC4_SRTR_3 0x378 /* Serial Port 3 Receive Timer Reg */ -#define IOC4_SHADOW_3 0x37C /* Serial Port 3 16550 Shadow Reg */ - -#define IOC4_UART0_BASE 0x380 /* UART 0 */ -#define IOC4_UART1_BASE 0x388 /* UART 1 */ -#define IOC4_UART2_BASE 0x390 /* UART 2 */ -#define IOC4_UART3_BASE 0x398 /* UART 3 */ - -/* Private page address aliases for usermode mapping */ -#define IOC4_INT_OUT_P 0x04000 /* INT_OUT Reg */ - -#define IOC4_SSCR_0_P 0x08000 /* Serial Port 0 */ -#define IOC4_STPIR_0_P 0x08004 -#define IOC4_STCIR_0_P 0x08008 /* (read-only) */ -#define IOC4_SRPIR_0_P 0x0800C /* (read-only) */ -#define IOC4_SRCIR_0_P 0x08010 -#define IOC4_SRTR_0_P 0x08014 -#define IOC4_UART_LSMSMCR_0_P 0x08018 /* (read-only) */ - -#define IOC4_SSCR_1_P 0x0C000 /* Serial Port 1 */ -#define IOC4_STPIR_1_P 0x0C004 -#define IOC4_STCIR_1_P 0x0C008 /* (read-only) */ -#define IOC4_SRPIR_1_P 0x0C00C /* (read-only) */ -#define IOC4_SRCIR_1_P 0x0C010 -#define IOC4_SRTR_1_P 0x0C014 -#define IOC4_UART_LSMSMCR_1_P 0x0C018 /* (read-only) */ - -#define IOC4_SSCR_2_P 0x10000 /* Serial Port 2 */ -#define IOC4_STPIR_2_P 0x10004 -#define IOC4_STCIR_2_P 0x10008 /* (read-only) */ -#define IOC4_SRPIR_2_P 0x1000C /* (read-only) */ -#define IOC4_SRCIR_2_P 0x10010 -#define IOC4_SRTR_2_P 0x10014 -#define IOC4_UART_LSMSMCR_2_P 0x10018 /* (read-only) */ - -#define IOC4_SSCR_3_P 0x14000 /* Serial Port 3 */ -#define IOC4_STPIR_3_P 0x14004 -#define IOC4_STCIR_3_P 0x14008 /* (read-only) */ -#define IOC4_SRPIR_3_P 0x1400C /* (read-only) */ -#define IOC4_SRCIR_3_P 0x14010 -#define IOC4_SRTR_3_P 0x14014 -#define IOC4_UART_LSMSMCR_3_P 0x14018 /* (read-only) */ - -#define IOC4_ALIAS_PAGE_SIZE 0x4000 - -/* Interrupt types */ -typedef enum ioc4_intr_type_e { - ioc4_sio_intr_type, - ioc4_other_intr_type, - ioc4_num_intr_types -} ioc4_intr_type_t; -#define ioc4_first_intr_type ioc4_sio_intr_type - -/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */ -#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */ -#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */ -#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */ -#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */ -#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */ -#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */ -#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */ -#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */ -#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */ -#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */ -#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */ -#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */ -#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */ -#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */ -#define IOC4_SIO_IR_S1_INT 0x00004000 /* */ -#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */ -#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */ -#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */ -#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */ -#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */ -#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */ -#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */ -#define IOC4_SIO_IR_S2_INT 0x00400000 /* */ -#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */ -#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */ -#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */ -#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */ -#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */ -#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */ -#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */ -#define IOC4_SIO_IR_S3_INT 0x40000000 /* */ -#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */ - -/* Per device interrupt masks */ -#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \ - IOC4_SIO_IR_S0_RX_FULL | \ - IOC4_SIO_IR_S0_RX_HIGH | \ - IOC4_SIO_IR_S0_RX_TIMER | \ - IOC4_SIO_IR_S0_DELTA_DCD | \ - IOC4_SIO_IR_S0_DELTA_CTS | \ - IOC4_SIO_IR_S0_INT | \ - IOC4_SIO_IR_S0_TX_EXPLICIT) -#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \ - IOC4_SIO_IR_S1_RX_FULL | \ - IOC4_SIO_IR_S1_RX_HIGH | \ - IOC4_SIO_IR_S1_RX_TIMER | \ - IOC4_SIO_IR_S1_DELTA_DCD | \ - IOC4_SIO_IR_S1_DELTA_CTS | \ - IOC4_SIO_IR_S1_INT | \ - IOC4_SIO_IR_S1_TX_EXPLICIT) -#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \ - IOC4_SIO_IR_S2_RX_FULL | \ - IOC4_SIO_IR_S2_RX_HIGH | \ - IOC4_SIO_IR_S2_RX_TIMER | \ - IOC4_SIO_IR_S2_DELTA_DCD | \ - IOC4_SIO_IR_S2_DELTA_CTS | \ - IOC4_SIO_IR_S2_INT | \ - IOC4_SIO_IR_S2_TX_EXPLICIT) -#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \ - IOC4_SIO_IR_S3_RX_FULL | \ - IOC4_SIO_IR_S3_RX_HIGH | \ - IOC4_SIO_IR_S3_RX_TIMER | \ - IOC4_SIO_IR_S3_DELTA_DCD | \ - IOC4_SIO_IR_S3_DELTA_CTS | \ - IOC4_SIO_IR_S3_INT | \ - IOC4_SIO_IR_S3_TX_EXPLICIT) - -/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */ -#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */ -#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */ -#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */ -#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */ -#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */ -#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */ -#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Kbd/mouse intr */ -#define IOC4_OTHER_IR_ATA_DMAINT 0x00000089 /* ATAPI DMA intr */ -#define IOC4_OTHER_IR_RT_INT 0x00800000 /* RT output pulse */ -#define IOC4_OTHER_IR_GEN_INT1 0x02000000 /* RT input pulse */ -#define IOC4_OTHER_IR_GEN_INT_SHIFT 25 - -/* Per device interrupt masks */ -#define IOC4_OTHER_IR_ATA (IOC4_OTHER_IR_ATA_INT | \ - IOC4_OTHER_IR_ATA_MEMERR | \ - IOC4_OTHER_IR_ATA_DMAINT) -#define IOC4_OTHER_IR_RT (IOC4_OTHER_IR_RT_INT | IOC4_OTHER_IR_GEN_INT1) - -/* Macro to load pending interrupts */ -#define IOC4_PENDING_SIO_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \ - PCI_INW(&((mem)->sio_ies_ro))) -#define IOC4_PENDING_OTHER_INTRS(mem) (PCI_INW(&((mem)->other_ir)) & \ - PCI_INW(&((mem)->other_ies_ro))) - -/* Bitmasks for IOC4_SIO_CR */ -#define IOC4_SIO_SR_CMD_PULSE 0x00000004 /* Byte bus strobe length */ -#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 -#define IOC4_SIO_CR_ARB_DIAG 0x00000070 /* Current non-ATA PCI bus - requester (ro) */ -#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000 -#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010 -#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020 -#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030 -#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040 -#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050 -#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060 -#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070 -#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among - serial ports (ro) */ -#define IOC4_SIO_CR_ATA_DIAG_IDLE 0x00000100 /* 0 -> active request from - ATA port */ -#define IOC4_SIO_CR_ATA_DIAG_ACTIVE 0x00000200 /* 1 -> ATA request is winner */ - -/* Bitmasks for IOC4_INT_OUT */ -#define IOC4_INT_OUT_COUNT 0x0000ffff /* Pulse interval timer */ -#define IOC4_INT_OUT_MODE 0x00070000 /* Mode mask */ -#define IOC4_INT_OUT_MODE_0 0x00000000 /* Set output to 0 */ -#define IOC4_INT_OUT_MODE_1 0x00040000 /* Set output to 1 */ -#define IOC4_INT_OUT_MODE_1PULSE 0x00050000 /* Send 1 pulse */ -#define IOC4_INT_OUT_MODE_PULSES 0x00060000 /* Send 1 pulse every interval */ -#define IOC4_INT_OUT_MODE_SQW 0x00070000 /* Toggle output every interval */ -#define IOC4_INT_OUT_DIAG 0x40000000 /* Diag mode */ -#define IOC4_INT_OUT_INT_OUT 0x80000000 /* Current state of INT_OUT */ - -/* Time constants for IOC4_INT_OUT */ -#define IOC4_INT_OUT_NS_PER_TICK (15 * 520) /* 15 ns PCI clock, multiR0 */ -#define IOC4_INT_OUT_TICKS_PER_PULSE 3 /* Outgoing pulse lasts 3 - ticks */ -#define IOC4_INT_OUT_US_TO_COUNT(x) /* Convert uS to a count value */ \ - (((x) * 10 + IOC4_INT_OUT_NS_PER_TICK / 200) * \ - 100 / IOC4_INT_OUT_NS_PER_TICK - 1) -#define IOC4_INT_OUT_COUNT_TO_US(x) /* Convert count value to uS */ \ - (((x) + 1) * IOC4_INT_OUT_NS_PER_TICK / 1000) -#define IOC4_INT_OUT_MIN_TICKS 3 /* Min period is width of - pulse in "ticks" */ -#define IOC4_INT_OUT_MAX_TICKS IOC4_INT_OUT_COUNT /* Largest possible count */ - -/* Bitmasks for IOC4_GPCR */ -#define IOC4_GPCR_DIR 0x000000ff /* Tristate pin in or out */ -#define IOC4_GPCR_DIR_PIN(x) (1<<(x)) /* Access one of the DIR bits */ -#define IOC4_GPCR_EDGE 0x0000ff00 /* Extint edge or level - sensitive */ -#define IOC4_GPCR_EDGE_PIN(x) (1<<((x)+7 )) /* Access one of the EDGE bits */ - -/* Values for IOC4_GPCR */ -#define IOC4_GPCR_INT_OUT_EN 0x00100000 /* Enable INT_OUT to pin 0 */ -#define IOC4_GPCR_DIR_SER0_XCVR 0x00000010 /* Port 0 Transceiver select - enable */ -#define IOC4_GPCR_DIR_SER1_XCVR 0x00000020 /* Port 1 Transceiver select - enable */ -#define IOC4_GPCR_DIR_SER2_XCVR 0x00000040 /* Port 2 Transceiver select - enable */ -#define IOC4_GPCR_DIR_SER3_XCVR 0x00000080 /* Port 3 Transceiver select - enable */ - -/* Defs for some of the generic I/O pins */ -#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0 - mode sel */ -#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1 - mode sel */ -#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2 - mode sel */ -#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3 - mode sel */ - -#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling - uart 0 mode select */ -#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling - uart 1 mode select */ -#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling - uart 2 mode select */ -#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling - uart 3 mode select */ - -/* Bitmasks for IOC4_ATA_TIMING */ -#define IOC4_ATA_TIMING_ADR_SETUP 0x00000003 /* Clocks of addr set-up */ -#define IOC4_ATA_TIMING_PULSE_WIDTH 0x000001f8 /* Clocks of read or write - pulse width */ -#define IOC4_ATA_TIMING_RECOVERY 0x0000fe00 /* Clocks before next read - or write */ -#define IOC4_ATA_TIMING_USE_IORDY 0x00010000 /* PIO uses IORDY */ - -/* Bitmasks for address list elements pointed to by IOC4_ATA_DMA_PTR_ */ -#define IOC4_ATA_ALE_DMA_ADDRESS 0xfffffffffffffffe - -/* Bitmasks for byte count list elements pointed to by IOC4_ATA_DMA_PTR_ */ -#define IOC4_ATA_BCLE_BYTE_COUNT 0x000000000000fffe -#define IOC4_ATA_BCLE_LIST_END 0x0000000080000000 - -/* Bitmasks for IOC4_ATA_BC_ */ -#define IOC4_ATA_BC_BYTE_CNT 0x0001fffe /* Byte count */ - -/* Bitmasks for IOC4_ATA_DMA_CTRL */ -#define IOC4_ATA_DMA_CTRL_STRAT 0x00000001 /* 1 -> start DMA engine */ -#define IOC4_ATA_DMA_CTRL_STOP 0x00000002 /* 1 -> stop DMA engine */ -#define IOC4_ATA_DMA_CTRL_DIR 0x00000004 /* 1 -> ATA bus data copied - to memory */ -#define IOC4_ATA_DMA_CTRL_ACTIVE 0x00000008 /* DMA channel is active */ -#define IOC4_ATA_DMA_CTRL_MEM_ERROR 0x00000010 /* DMA engine encountered - a PCI error */ -/* Bitmasks for IOC4_KM_CSR */ -#define IOC4_KM_CSR_K_WRT_PEND 0x00000001 /* Kbd port xmitting or resetting */ -#define IOC4_KM_CSR_M_WRT_PEND 0x00000002 /* Mouse port xmitting or resetting */ -#define IOC4_KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */ -#define IOC4_KM_CSR_M_LCB 0x00000008 /* Same for mouse */ -#define IOC4_KM_CSR_K_DATA 0x00000010 /* State of kbd data line */ -#define IOC4_KM_CSR_K_CLK 0x00000020 /* State of kbd clock line */ -#define IOC4_KM_CSR_K_PULL_DATA 0x00000040 /* Pull kbd data line low */ -#define IOC4_KM_CSR_K_PULL_CLK 0x00000080 /* Pull kbd clock line low */ -#define IOC4_KM_CSR_M_DATA 0x00000100 /* State of mouse data line */ -#define IOC4_KM_CSR_M_CLK 0x00000200 /* State of mouse clock line */ -#define IOC4_KM_CSR_M_PULL_DATA 0x00000400 /* Pull mouse data line low */ -#define IOC4_KM_CSR_M_PULL_CLK 0x00000800 /* Pull mouse clock line low */ -#define IOC4_KM_CSR_EMM_MODE 0x00001000 /* Emulation mode */ -#define IOC4_KM_CSR_SIM_MODE 0x00002000 /* Clock X8 */ -#define IOC4_KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */ -#define IOC4_KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */ -#define IOC4_KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */ -#define IOC4_KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */ -#define IOC4_KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN - cause SIO_IR to assert */ -#define IOC4_KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN - cause SIO_IR to assert */ -#define IOC4_KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */ -#define IOC4_KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */ -#define IOC4_KM_CSR_K_CLAMP_THREE \ - 0x00400000 /* Pull K_CLK low after rec. three chars */ -#define IOC4_KM_CSR_M_CLAMP_THREE \ - 0x00800000 /* Pull M_CLK low after rec. three char */ - -/* Bitmasks for IOC4_K_RD and IOC4_M_RD */ -#define IOC4_KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */ -#define IOC4_KM_RD_DATA_2_SHIFT 0 -#define IOC4_KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */ -#define IOC4_KM_RD_DATA_1_SHIFT 8 -#define IOC4_KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */ -#define IOC4_KM_RD_DATA_0_SHIFT 16 -#define IOC4_KM_RD_FRAME_ERR_2 0x01000000 /* Framing or parity error in byte 2 */ -#define IOC4_KM_RD_FRAME_ERR_1 0x02000000 /* Same for byte 1 */ -#define IOC4_KM_RD_FRAME_ERR_0 0x04000000 /* Same for byte 0 */ - -#define IOC4_KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */ -#define IOC4_KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */ -#define IOC4_KM_RD_VALID_2 0x20000000 /* DATA_2 valid */ -#define IOC4_KM_RD_VALID_1 0x40000000 /* DATA_1 valid */ -#define IOC4_KM_RD_VALID_0 0x80000000 /* DATA_0 valid */ -#define IOC4_KM_RD_VALID_ALL (IOC4_KM_RD_VALID_0 | IOC4_KM_RD_VALID_1 | \ - IOC4_KM_RD_VALID_2) - -/* Bitmasks for IOC4_K_WD & IOC4_M_WD */ -#define IOC4_KM_WD_WRT_DATA 0x000000ff /* Write to keyboard/mouse port */ -#define IOC4_KM_WD_WRT_DATA_SHIFT 0 - -/* Bitmasks for serial RX status byte */ -#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */ -#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */ -#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */ -#define IOC4_RXSB_BREAK 0x08 /* Break character */ -#define IOC4_RXSB_CTS 0x10 /* State of CTS */ -#define IOC4_RXSB_DCD 0x20 /* State of DCD */ -#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */ -#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR & BREAK valid */ - -/* Bitmasks for serial TX control byte */ -#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */ -#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */ -#define IOC4_TXCB_VALID 0x40 /* Byte is valid */ -#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control register */ -#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */ - -/* Bitmasks for IOC4_SBBR_L */ -#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 = 1KB rings, 1 = 4KB rings */ -#define IOC4_SBBR_L_BASE 0xfffff000 /* Lower serial ring base addr */ - -/* Bitmasks for IOC4_SSCR_<3:0> */ -#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */ -#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ -#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */ -#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */ -#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */ -#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */ -#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */ -#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */ -#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */ -#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */ -#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */ - -/* All producer/comsumer pointers are the same bitfield */ -#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */ -#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */ -#define IOC4_PROD_CONS_PTR_OFF 3 - -/* Bitmasks for IOC4_STPIR_<3:0> */ -/* Reserved for future register definitions */ - -/* Bitmasks for IOC4_STCIR_<3:0> */ -#define IOC4_STCIR_BYTE_CNT 0x0f000000 /* Bytes in unpacker */ -#define IOC4_STCIR_BYTE_CNT_SHIFT 24 - -/* Bitmasks for IOC4_SRPIR_<3:0> */ -#define IOC4_SRPIR_BYTE_CNT 0x0f000000 /* Bytes in packer */ -#define IOC4_SRPIR_BYTE_CNT_SHIFT 24 - -/* Bitmasks for IOC4_SRCIR_<3:0> */ -#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */ - -/* Bitmasks for IOC4_SHADOW_<3:0> */ -#define IOC4_SHADOW_DR 0x00000001 /* Data ready */ -#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */ -#define IOC4_SHADOW_PE 0x00000004 /* Parity error */ -#define IOC4_SHADOW_FE 0x00000008 /* Framing error */ -#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */ -#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */ -#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */ -#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */ -#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */ -#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */ -#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */ -#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */ -#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */ -#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */ -#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ -#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ -#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */ - -/* Bitmasks for IOC4_SRTR_<3:0> */ -#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */ -#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */ -#define IOC4_SRTR_CNT_VAL_SHIFT 16 -#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */ - -/* Serial port register map used for DMA and PIO serial I/O */ -typedef volatile struct ioc4_serialregs { - ioc4reg_t sscr; - ioc4reg_t stpir; - ioc4reg_t stcir; - ioc4reg_t srpir; - ioc4reg_t srcir; - ioc4reg_t srtr; - ioc4reg_t shadow; -} ioc4_sregs_t; - -/* IOC4 UART register map */ -typedef volatile struct ioc4_uartregs { - union { - char rbr; /* read only, DLAB = 0 */ - char thr; /* write only, DLAB = 0 */ - char dll; /* DLAB = 1 */ - } u1; - union { - char ier; /* DLAB = 0 */ - char dlm; /* DLAB = 1 */ - } u2; - union { - char iir; /* read only */ - char fcr; /* write only */ - } u3; - char i4u_lcr; - char i4u_mcr; - char i4u_lsr; - char i4u_msr; - char i4u_scr; -} ioc4_uart_t; - -#define i4u_rbr u1.rbr -#define i4u_thr u1.thr -#define i4u_dll u1.dll -#define i4u_ier u2.ier -#define i4u_dlm u2.dlm -#define i4u_iir u3.iir -#define i4u_fcr u3.fcr - -/* PCI config space register map */ -typedef volatile struct ioc4_configregs { - ioc4reg_t pci_id; - ioc4reg_t pci_scr; - ioc4reg_t pci_rev; - ioc4reg_t pci_lat; - ioc4reg_t pci_bar0; - ioc4reg_t pci_bar1; - ioc4reg_t pci_bar2_not_implemented; - ioc4reg_t pci_cis_ptr_not_implemented; - ioc4reg_t pci_sidv; - ioc4reg_t pci_rom_bar_not_implemented; - ioc4reg_t pci_cap; - ioc4reg_t pci_rsv; - ioc4reg_t pci_latgntint; - - char pci_fill1[0x58 - 0x3c - 4]; - - ioc4reg_t pci_pcix; - ioc4reg_t pci_pcixstatus; -} ioc4_cfg_t; - -/* PCI memory space register map addressed using pci_bar0 */ -typedef volatile struct ioc4_memregs { - - /* Miscellaneous IOC4 registers */ - ioc4reg_t pci_err_addr_l; - ioc4reg_t pci_err_addr_h; - ioc4reg_t sio_ir; - ioc4reg_t other_ir; - - /* These registers are read-only for general kernel code. To - * modify them use the functions in ioc4.c. - */ - ioc4reg_t sio_ies_ro; - ioc4reg_t other_ies_ro; - ioc4reg_t sio_iec_ro; - ioc4reg_t other_iec_ro; - ioc4reg_t sio_cr; - ioc4reg_t misc_fill1; - ioc4reg_t int_out; - ioc4reg_t misc_fill2; - ioc4reg_t gpcr_s; - ioc4reg_t gpcr_c; - ioc4reg_t gpdr; - ioc4reg_t misc_fill3; - ioc4reg_t gppr_0; - ioc4reg_t gppr_1; - ioc4reg_t gppr_2; - ioc4reg_t gppr_3; - ioc4reg_t gppr_4; - ioc4reg_t gppr_5; - ioc4reg_t gppr_6; - ioc4reg_t gppr_7; - - char misc_fill4[0x100 - 0x5C - 4]; - - /* ATA/ATAP registers */ - ioc4reg_t ata_0; - ioc4reg_t ata_1; - ioc4reg_t ata_2; - ioc4reg_t ata_3; - ioc4reg_t ata_4; - ioc4reg_t ata_5; - ioc4reg_t ata_6; - ioc4reg_t ata_7; - ioc4reg_t ata_aux; - - char ata_fill1[0x140 - 0x120 - 4]; - - ioc4reg_t ata_timing; - ioc4reg_t ata_dma_ptr_l; - ioc4reg_t ata_dma_ptr_h; - ioc4reg_t ata_dma_addr_l; - ioc4reg_t ata_dma_addr_h; - ioc4reg_t ata_bc_dev; - ioc4reg_t ata_bc_mem; - ioc4reg_t ata_dma_ctrl; - - char ata_fill2[0x200 - 0x15C - 4]; - - /* Keyboard and mouse registers */ - ioc4reg_t km_csr; - ioc4reg_t k_rd; - ioc4reg_t m_rd; - ioc4reg_t k_wd; - ioc4reg_t m_wd; - - char km_fill1[0x300 - 0x210 - 4]; - - /* Serial port registers used for DMA serial I/O */ - ioc4reg_t sbbr01_l; - ioc4reg_t sbbr01_h; - ioc4reg_t sbbr23_l; - ioc4reg_t sbbr23_h; - - ioc4_sregs_t port_0; - ioc4_sregs_t port_1; - ioc4_sregs_t port_2; - ioc4_sregs_t port_3; - - ioc4_uart_t uart_0; - ioc4_uart_t uart_1; - ioc4_uart_t uart_2; - ioc4_uart_t uart_3; -} ioc4_mem_t; - -#endif /* 0 */ - -/* - * Bytebus device space - */ -#define IOC4_BYTEBUS_DEV0 0x80000L /* Addressed using pci_bar0 */ -#define IOC4_BYTEBUS_DEV1 0xA0000L /* Addressed using pci_bar0 */ -#define IOC4_BYTEBUS_DEV2 0xC0000L /* Addressed using pci_bar0 */ -#define IOC4_BYTEBUS_DEV3 0xE0000L /* Addressed using pci_bar0 */ - -#if 0 -/* UART clock speed */ -#define IOC4_SER_XIN_CLK 66000000 - -typedef enum ioc4_subdevs_e { - ioc4_subdev_generic, - ioc4_subdev_kbms, - ioc4_subdev_tty0, - ioc4_subdev_tty1, - ioc4_subdev_tty2, - ioc4_subdev_tty3, - ioc4_subdev_rt, - ioc4_nsubdevs -} ioc4_subdev_t; - -/* Subdevice disable bits, - * from the standard INFO_LBL_SUBDEVS - */ -#define IOC4_SDB_TTY0 (1 << ioc4_subdev_tty0) -#define IOC4_SDB_TTY1 (1 << ioc4_subdev_tty1) -#define IOC4_SDB_TTY2 (1 << ioc4_subdev_tty2) -#define IOC4_SDB_TTY3 (1 << ioc4_subdev_tty3) -#define IOC4_SDB_KBMS (1 << ioc4_subdev_kbms) -#define IOC4_SDB_RT (1 << ioc4_subdev_rt) -#define IOC4_SDB_GENERIC (1 << ioc4_subdev_generic) - -#define IOC4_ALL_SUBDEVS ((1 << ioc4_nsubdevs) - 1) - -#define IOC4_SDB_SERIAL (IOC4_SDB_TTY0 | IOC4_SDB_TTY1 | IOC4_SDB_TTY2 | IOC4_SDB_TTY3) - -#define IOC4_STD_SUBDEVS IOC4_ALL_SUBDEVS - -#define IOC4_INTA_SUBDEVS (IOC4_SDB_SERIAL | IOC4_SDB_KBMS | IOC4_SDB_RT | IOC4_SDB_GENERIC) - -extern int ioc4_subdev_enabled(vertex_hdl_t, ioc4_subdev_t); -extern void ioc4_subdev_enables(vertex_hdl_t, ulong_t); -extern void ioc4_subdev_enable(vertex_hdl_t, ioc4_subdev_t); -extern void ioc4_subdev_disable(vertex_hdl_t, ioc4_subdev_t); - -/* Macros to read and write the SIO_IEC and SIO_IES registers (see the - * comments in ioc4.c for details on why this is necessary - */ -#define IOC4_W_IES 0 -#define IOC4_W_IEC 1 -extern void ioc4_write_ireg(void *, ioc4reg_t, int, ioc4_intr_type_t); - -#define IOC4_WRITE_IES(ioc4, val, type) ioc4_write_ireg(ioc4, val, IOC4_W_IES, type) -#define IOC4_WRITE_IEC(ioc4, val, type) ioc4_write_ireg(ioc4, val, IOC4_W_IEC, type) - -typedef void -ioc4_intr_func_f (intr_arg_t, ioc4reg_t); - -typedef void -ioc4_intr_connect_f (vertex_hdl_t conn_vhdl, - ioc4_intr_type_t, - ioc4reg_t, - ioc4_intr_func_f *, - intr_arg_t info, - vertex_hdl_t owner_vhdl, - vertex_hdl_t intr_dev_vhdl, - int (*)(intr_arg_t)); - -typedef void -ioc4_intr_disconnect_f (vertex_hdl_t conn_vhdl, - ioc4_intr_type_t, - ioc4reg_t, - ioc4_intr_func_f *, - intr_arg_t info, - vertex_hdl_t owner_vhdl); - -ioc4_intr_disconnect_f ioc4_intr_disconnect; -ioc4_intr_connect_f ioc4_intr_connect; - -extern int ioc4_is_console(vertex_hdl_t conn_vhdl); - -extern void ioc4_mlreset(ioc4_cfg_t *, ioc4_mem_t *); - -extern intr_func_f ioc4_intr; - -extern ioc4_mem_t *ioc4_mem_ptr(void *ioc4_fastinfo); - -typedef ioc4_intr_func_f *ioc4_intr_func_t; - -#endif /* 0 */ -#endif /* _ASM_IA64_SN_IOC4_H */ diff -Nru a/include/asm-ia64/sn/nag.h b/include/asm-ia64/sn/nag.h --- a/include/asm-ia64/sn/nag.h Sat Sep 27 16:05:31 2003 +++ b/include/asm-ia64/sn/nag.h Sat Sep 27 16:05:31 2003 @@ -1,32 +0,0 @@ -/* - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2001-2003 Silicon Graphics, Inc. All rights reserved. -*/ - - -#ifndef _ASM_IA64_SN_NAG_H -#define _ASM_IA64_SN_NAG_H - - -#define NAG(mesg...) \ -do { \ - static unsigned int how_broken = 1; \ - static unsigned int threshold = 1; \ - if (how_broken = threshold) { \ - if (threshold < 10000) \ - threshold *= 10; \ - if (how_broken > 1) \ - printk(KERN_WARNING "%u times: ", how_broken); \ - else \ - printk(KERN_WARNING); \ - printk(mesg); \ - } \ - how_broken++; \ -} while (0) - - -#endif /* _ASM_IA64_SN_NAG_H */