From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
To: linux-ia64@vger.kernel.org
Subject: [PATCH] salinfo for 2.6.0-test9
Date: Thu, 06 Nov 2003 11:57:26 +0000 [thread overview]
Message-ID: <marc-linux-ia64-106812011912671@msgid-missing> (raw)
Hi.
Here is my loose patch porting 2.4.22 salinfo to 2.6.0-test9.
This just replaces some missing:
suser() => capable()
inode->u.generic_ip => PDE(inode)
I'm not sure this work correctly. Please fix.
------
H.Seto <seto.hidetoshi@jp.fujitsu.com>
diff -Nuar linux-2.6.0-test9/arch/ia64/kernel/mca.c
linux-2.6.0-test9_salinfo/arch/ia64/kernel/mca.c
--- linux-2.6.0-test9/arch/ia64/kernel/mca.c 2003-10-26 03:43:35.000000000 +0900
+++ linux-2.6.0-test9_salinfo/arch/ia64/kernel/mca.c 2003-11-06
15:59:23.000000000 +0900
@@ -149,12 +149,14 @@
*/
static int cpe_poll_enabled = 1;
+extern void salinfo_log_wakeup(int);
+
/*
* ia64_mca_log_sal_error_record
*
- * This function retrieves a specified error record type from SAL, sends it to
- * the system log, and notifies SALs to clear the record from its non-volatile
- * memory.
+ * This function retrieves a specified error record type from SAL,
+ * wakes up any processes waiting for error records, and sends it to
+ * the system log.
*
* Inputs : sal_info_type (Type of error record MCA/CMC/CPE/INIT)
* Outputs : platform error status
@@ -174,11 +176,8 @@
* 3. set ia64_os_mca_recovery_successful flag, if applicable
*/
+ salinfo_log_wakeup(sal_info_type);
platform_err = ia64_log_print(sal_info_type, (prfunc_t)printk);
- /* temporary: only clear SAL logs on hardware-corrected errors
- or if we're logging an error after an MCA-initiated reboot */
- if ((sal_info_type > 1) || (called_from_init))
- ia64_sal_clear_state_info(sal_info_type);
return platform_err;
}
@@ -413,9 +412,7 @@
* ia64_mca_check_errors
*
* External entry to check for error records which may have been posted by SAL
- * for a prior failure which resulted in a machine shutdown before an the
- * error could be logged. This function must be called after the filesystem
- * is initialized.
+ * for a prior failure.
*
* Inputs : None
*
@@ -2352,10 +2349,8 @@
switch(sal_info_type) {
case SAL_INFO_TYPE_MCA:
- prfunc("+BEGIN HARDWARE ERROR STATE AT MCA\n");
- platform_err ia64_log_platform_info_print(IA64_LOG_CURR_BUFFER(sal_info_type),
- prfunc);
- prfunc("+END HARDWARE ERROR STATE AT MCA\n");
+ prfunc("+CPU %d: SAL log contains MCA error record\n", smp_processor_id());
+ ia64_log_rec_header_print(IA64_LOG_CURR_BUFFER(sal_info_type), prfunc);
break;
case SAL_INFO_TYPE_INIT:
prfunc("+MCA INIT ERROR LOG (UNIMPLEMENTED)\n");
diff -Nuar linux-2.6.0-test9/arch/ia64/kernel/salinfo.c
linux-2.6.0-test9_salinfo/arch/ia64/kernel/salinfo.c
--- linux-2.6.0-test9/arch/ia64/kernel/salinfo.c 2003-10-26 03:44:10.000000000
+0900
+++ linux-2.6.0-test9_salinfo/arch/ia64/kernel/salinfo.c 2003-11-06
16:43:14.251912714 +0900
@@ -4,6 +4,8 @@
* Creates entries in /proc/sal for various system features.
*
* Copyright (c) 2001 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2003 Hewlett-Packard Co
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
*
* 09/11/2003 jbarnes@sgi.com updated for 2.6
* 10/30/2001 jbarnes@sgi.com copied much of Stephane's palinfo
@@ -13,8 +15,11 @@
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/capability.h>
#include <asm/sal.h>
+#include <asm/uaccess.h>
MODULE_AUTHOR("Jesse Barnes <jbarnes@sgi.com>");
MODULE_DESCRIPTION("/proc interface to IA-64 SAL features");
@@ -39,30 +44,324 @@
{ "itc_drift", IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT, },
};
-#define NR_SALINFO_ENTRIES ARRAY_SIZE(salinfo_entries)
+#define NR_SALINFO_ENTRIES (sizeof(salinfo_entries)/sizeof(salinfo_entry_t))
-/*
- * One for each feature and one more for the directory entry...
- */
-static struct proc_dir_entry *salinfo_proc_entries[NR_SALINFO_ENTRIES + 1];
+static char *salinfo_log_name[] = {
+ "mca",
+ "init",
+ "cmc",
+ "cpe",
+};
+
+static struct proc_dir_entry *salinfo_proc_entries[
+ ARRAY_SIZE(salinfo_entries) + /* /proc/sal/bus_lock */
+ ARRAY_SIZE(salinfo_log_name) + /* /proc/sal/{mca,...} */
+ (2 * ARRAY_SIZE(salinfo_log_name)) + /* /proc/sal/mca/{event,data} */
+ 1]; /* /proc/sal */
+
+struct salinfo_log_data {
+ int type;
+ u8 *log_buffer;
+ u64 log_size;
+};
+
+struct salinfo_event {
+ int type;
+ int cpu; /* next CPU to check */
+ volatile unsigned long cpu_mask;
+ wait_queue_head_t queue;
+};
+
+static struct salinfo_event *salinfo_event[ARRAY_SIZE(salinfo_log_name)];
+
+struct salinfo_data {
+ int open; /* single-open to prevent races */
+ int type;
+ int cpu; /* "current" cpu for reads */
+};
+
+static struct salinfo_data salinfo_data[ARRAY_SIZE(salinfo_log_name)];
+
+static spinlock_t data_lock;
+
+void
+salinfo_log_wakeup(int type)
+{
+ if (type < ARRAY_SIZE(salinfo_log_name)) {
+ struct salinfo_event *event = salinfo_event[type];
+
+ if (event) {
+ set_bit(smp_processor_id(), &event->cpu_mask);
+ wake_up_interruptible(&event->queue);
+ }
+ }
+}
+
+static int
+salinfo_event_open(struct inode *inode, struct file *file)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ return 0;
+}
+
+static ssize_t
+salinfo_event_read(struct file *file, char *buffer, size_t count, loff_t *ppos)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ struct proc_dir_entry *entry = PDE(inode);
+ struct salinfo_event *event = entry->data;
+ char cmd[32];
+ size_t size;
+ int i, n, cpu = -1;
+
+retry:
+ if (!event->cpu_mask) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ interruptible_sleep_on(&event->queue);
+ if (signal_pending(current))
+ return -EINTR;
+ }
+
+ n = event->cpu;
+ for (i = 0; i < NR_CPUS; i++) {
+ if (event->cpu_mask & 1UL << n) {
+ cpu = n;
+ break;
+ }
+ if (++n = NR_CPUS)
+ n = 0;
+ }
+
+ if (cpu = -1)
+ goto retry;
+
+ /* for next read, start checking at next CPU */
+ event->cpu = cpu;
+ if (++event->cpu = NR_CPUS)
+ event->cpu = 0;
+
+ snprintf(cmd, sizeof(cmd), "read %d\n", cpu);
+
+ size = strlen(cmd);
+ if (size > count)
+ size = count;
+ if (copy_to_user(buffer, cmd, size))
+ return -EFAULT;
+
+ return size;
+}
+
+static struct file_operations salinfo_event_fops = {
+ .open = salinfo_event_open,
+ .read = salinfo_event_read,
+};
+
+static int
+salinfo_log_open(struct inode *inode, struct file *file)
+{
+ struct proc_dir_entry *entry = PDE(inode);
+ struct salinfo_data *data = entry->data;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ spin_lock(&data_lock);
+ if (data->open) {
+ spin_unlock(&data_lock);
+ return -EBUSY;
+ }
+ data->open = 1;
+ spin_unlock(&data_lock);
+
+ return 0;
+}
+
+static int
+salinfo_log_release(struct inode *inode, struct file *file)
+{
+ struct proc_dir_entry *entry = PDE(inode);
+ struct salinfo_data *data = entry->data;
+
+ spin_lock(&data_lock);
+ data->open = 0;
+ spin_unlock(&data_lock);
+ return 0;
+}
+
+static void
+call_on_cpu(int cpu, void (*fn)(void *), void *arg)
+{
+ if (cpu = smp_processor_id())
+ (*fn)(arg);
+#ifdef CONFIG_SMP
+ else if (cpu_online(cpu)) /* cpu may not have been validated */
+ smp_call_function_single(cpu, fn, arg, 0, 1);
+#endif
+}
+
+static void
+salinfo_log_read_cpu(void *context)
+{
+ struct salinfo_log_data *info = context;
+ struct salinfo_event *event = salinfo_event[info->type];
+ u64 size;
+
+ size = ia64_sal_get_state_info_size(info->type);
+ info->log_buffer = kmalloc(size, GFP_ATOMIC);
+ if (!info->log_buffer)
+ return;
+
+ clear_bit(smp_processor_id(), &event->cpu_mask);
+ info->log_size = ia64_sal_get_state_info(info->type, (u64 *)
info->log_buffer);
+ if (info->log_size)
+ salinfo_log_wakeup(info->type);
+}
+
+static ssize_t
+salinfo_log_read(struct file *file, char *buffer, size_t count, loff_t *ppos)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ struct proc_dir_entry *entry = PDE(inode);
+ struct salinfo_data *data = entry->data;
+ struct salinfo_log_data info;
+ int ret;
+ void *saldata;
+ size_t size;
+
+ info.type = data->type;
+ info.log_buffer = 0;
+ call_on_cpu(data->cpu, salinfo_log_read_cpu, &info);
+ if (!info.log_buffer || *ppos >= info.log_size) {
+ ret = 0;
+ goto out;
+ }
+
+ saldata = info.log_buffer + file->f_pos;
+ size = info.log_size - file->f_pos;
+ if (size > count)
+ size = count;
+ if (copy_to_user(buffer, saldata, size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ *ppos += size;
+ ret = size;
+
+out:
+ kfree(info.log_buffer);
+ return ret;
+}
+
+static void
+salinfo_log_clear_cpu(void *context)
+{
+ struct salinfo_data *data = context;
+ struct salinfo_event *event = salinfo_event[data->type];
+ struct salinfo_log_data info;
+
+ clear_bit(smp_processor_id(), &event->cpu_mask);
+ ia64_sal_clear_state_info(data->type);
+
+ /* clearing one record may make another visible */
+ info.type = data->type;
+ salinfo_log_read_cpu(&info);
+ if (info.log_buffer && info.log_size)
+ salinfo_log_wakeup(data->type);
+
+ kfree(info.log_buffer);
+}
+
+static ssize_t
+salinfo_log_write(struct file *file, const char *buffer, size_t count, loff_t
*ppos)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ struct proc_dir_entry *entry = PDE(inode);
+ struct salinfo_data *data = entry->data;
+ char cmd[32];
+ size_t size;
+ int cpu;
+
+ size = sizeof(cmd);
+ if (count < size)
+ size = count;
+ if (copy_from_user(cmd, buffer, size))
+ return -EFAULT;
+
+ if (sscanf(cmd, "read %d", &cpu) = 1)
+ data->cpu = cpu;
+ else if (sscanf(cmd, "clear %d", &cpu) = 1)
+ call_on_cpu(cpu, salinfo_log_clear_cpu, data);
+
+ return count;
+}
+
+static struct file_operations salinfo_data_fops = {
+ .open = salinfo_log_open,
+ .release = salinfo_log_release,
+ .read = salinfo_log_read,
+ .write = salinfo_log_write,
+};
static int __init
salinfo_init(void)
{
struct proc_dir_entry *salinfo_dir; /* /proc/sal dir entry */
struct proc_dir_entry **sdir = salinfo_proc_entries; /* keeps track of every
entry */
- int i;
+ struct proc_dir_entry *dir, *entry;
+ struct salinfo_event *event;
+ struct salinfo_data *data;
+ int i, j;
salinfo_dir = proc_mkdir("sal", NULL);
+ if (!salinfo_dir)
+ return 0;
for (i=0; i < NR_SALINFO_ENTRIES; i++) {
/* pass the feature bit in question as misc data */
- *sdir = create_proc_read_entry (salinfo_entries[i].name, 0, salinfo_dir,
+ *sdir++ = create_proc_read_entry (salinfo_entries[i].name, 0, salinfo_dir,
salinfo_read, (void *)salinfo_entries[i].feature);
- if (*sdir)
- (*sdir)->owner = THIS_MODULE;
- sdir++;
}
+
+ for (i = 0; i < ARRAY_SIZE(salinfo_log_name); i++) {
+ dir = proc_mkdir(salinfo_log_name[i], salinfo_dir);
+ if (!dir)
+ continue;
+
+ entry = create_proc_entry("event", S_IRUSR, dir);
+ if (!entry)
+ continue;
+
+ event = kmalloc(sizeof(*event), GFP_KERNEL);
+ if (!event)
+ continue;
+ memset(event, 0, sizeof(*event));
+ event->type = i;
+ init_waitqueue_head(&event->queue);
+ salinfo_event[i] = event;
+ /* we missed any events before now */
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ set_bit(j, &event->cpu_mask);
+ entry->data = event;
+ entry->proc_fops = &salinfo_event_fops;
+ *sdir++ = entry;
+
+ entry = create_proc_entry("data", S_IRUSR | S_IWUSR, dir);
+ if (!entry)
+ continue;
+
+ data = &salinfo_data[i];
+ data->type = i;
+ entry->data = data;
+ entry->proc_fops = &salinfo_data_fops;
+ *sdir++ = entry;
+
+ *sdir++ = dir;
+ }
+
*sdir++ = salinfo_dir;
return 0;
@@ -73,7 +372,7 @@
{
int i = 0;
- for (i = 0; i < NR_SALINFO_ENTRIES ; i++) {
+ for (i = 0; i < ARRAY_SIZE(salinfo_proc_entries); i++) {
if (salinfo_proc_entries[i])
remove_proc_entry (salinfo_proc_entries[i]->name, NULL);
}
@@ -88,6 +387,8 @@
{
int len = 0;
+ MOD_INC_USE_COUNT;
+
len = sprintf(page, (sal_platform_features & (unsigned long)data) ? "1\n" :
"0\n");
if (len <= off+count) *eof = 1;
@@ -98,6 +399,8 @@
if (len>count) len = count;
if (len<0) len = 0;
+ MOD_DEC_USE_COUNT;
+
return len;
}
next reply other threads:[~2003-11-06 11:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-06 11:57 Hidetoshi Seto [this message]
2003-11-06 12:34 ` [PATCH] salinfo for 2.6.0-test9 Keith Owens
2003-11-07 9:51 ` Hidetoshi Seto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-ia64-106812011912671@msgid-missing \
--to=seto.hidetoshi@jp.fujitsu.com \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox