ACPI Test Report for 2.4 ia64 kernel + latest ACPI ========================= Hardware Configuration: ----------------------- System Name: ACPI-LION System Type: 4 way 800M Itanium, Lion M/B revision: N/A Processor version: N/A Firmware Versions: N/A I/O configuration summary: QLogic QLA12160, Seagate ST39205LC boot drive IDE floppy and CDROM Serial console PS/2 keyboard and mouse USB mouse Ethernet Pro 100 Software Configuration: ----------------------- 1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 11/11 (Shanghai time) 2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 11/11 (Shanhai time) Successfully automerged by bk without out any manually work. ACPI Features Tested: (prioritized). -------------------- 1. Boot off SCSI disk tested ok 2. serial console tested ok 3. PS/2 keyboard tested ok 4. ATI (run X window system) tested ok 5. PS/2 mouse tested ok 6. USB mouse Doesn't work 7. NIC (eg. Ping or ftp) tested ok 8. IDE (eg. r/w floppy or CDROM) tested ok 9. SCI (eg. Press power button) tested ok CPU0 CPU1 CPU2 CPU3 32: 955 3 18 4 IO-SAPIC-edge keyboard 33: 758 1 12 2 IO-SAPIC-edge ide1 34: 35 3 0 0 IO-SAPIC-edge ide0 36: 1155 1 62 5 IO-SAPIC-edge PS/2 Mouse 39: 5 0 0 0 IO-SAPIC-level acpi 44: 8 0 0 0 IO-SAPIC-edge serial 45: 17 0 0 0 IO-SAPIC-edge serial 48: 50 0 0 0 IO-SAPIC-level usb-uhci 49: 416 2 16 3 IO-SAPIC-level eth0 51: 6711 50 317 33 IO-SAPIC-level qla1280 239: 415744 405691 414447 414241 LSAPIC timer 254: 16595 17569 17140 16850 LSAPIC IPI NMI: 0 0 0 0 ERR: 0 Problems: 1. Unalignment issue.( It appeared when testing power button) kernel unaligned access to 0xe000000004c2f199, ip=0xe000000004615fb1 2. USB doesn't work 3.PCI: no interrupt route for 00:00:03 pin B 4.alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed (Bjron said it is harmless) 5.> 1. After login, the dmesg return below message. (Bjorn said these are unimplemented system call, Need a patch to turn off them) > ... > ifup-post(864): <> <> <> Thanks, Luming