From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Schwab Date: Wed, 12 Nov 2003 15:37:24 +0000 Subject: drivers/usb/core/config.c: invalid configuration descriptor Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-ia64@vger.kernel.org When I try to run 2.6.0-test9 on an HP Everest I can't get USB working. All I get is this: drivers/usb/core/usb.c: registered new driver hub PCI: Found IRQ 52 for device 0000:01:04.0 IOSAPIC: vector 52 -> CPU 0x0200, enabled ohci_hcd 0000:01:04.0: OHCI Host Controller ohci_hcd 0000:01:04.0: irq 52, pci mem c000000088032000 ohci_hcd 0000:01:04.0: new USB bus registered, assigned bus number 1 drivers/usb/core/config.c: invalid configuration descriptor usb usb1: can't read configurations, error -22 ohci_hcd 0000:01:04.0: can't register root hub for usb1, -22 ohci_hcd 0000:01:04.0: can't start ohci_hcd 0000:01:04.0: remove, state 0 ohci_hcd 0000:01:04.0: USB bus 1 deregistered ohci_hcd: probe of 0000:01:04.0 failed with error -16 PCI: Found IRQ 53 for device 0000:01:04.1 IOSAPIC: vector 53 -> CPU 0x0300, enabled ohci_hcd 0000:01:04.1: OHCI Host Controller ohci_hcd 0000:01:04.1: irq 53, pci mem c000000088031000 ohci_hcd 0000:01:04.1: new USB bus registered, assigned bus number 1 drivers/usb/core/config.c: invalid configuration descriptor usb usb1: can't read configurations, error -22 ohci_hcd 0000:01:04.1: can't register root hub for usb1, -22 ohci_hcd 0000:01:04.1: can't start ohci_hcd 0000:01:04.1: remove, state 0 ohci_hcd 0000:01:04.1: USB bus 1 deregistered ohci_hcd: probe of 0000:01:04.1 failed with error -16 PCI: Found IRQ 54 for device 0000:01:04.2 IOSAPIC: vector 54 -> CPU 0x0000, enabled ehci_hcd 0000:01:04.2: EHCI Host Controller ehci_hcd 0000:01:04.2: irq 54, pci mem c000000088030000 ehci_hcd 0000:01:04.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:01:04.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13 drivers/usb/core/config.c: invalid configuration descriptor usb usb1: can't read configurations, error -22 ehci_hcd 0000:01:04.2: can't register root hub for usb1, -22 ehci_hcd 0000:01:04.2: remove, state 0 modprobe[987]: NaT consumption 17179869216 [1] =20 Pid: 987, CPU 1, comm: modprobe psr : 0000101008022018 ifs : 8000000000000690 ip : [] = Not tainted ip is at scan_async+0xa0/0x340 [ehci_hcd] unat: 0000000000000000 pfs : 0000000000000308 rsc : 0000000000000003 rnat: fffffffff5955559 bsps: a000000100306e70 pr : fffffffff5952659 ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f csd : 0000000000000000 ssd : 0000000000000000 b0 : a00000020017dbe0 b6 : a000000100002d70 b7 : a000000100174fe0 f6 : 000000000000000000000 f7 : 0ffdca200000000000000 f8 : 100028000000000000000 f9 : 10002a000000000000000 f10 : 0fffeccccccccc8c00000 f11 : 1003e0000000000000000 r1 : a000000200370000 r2 : 0000000000000000 r3 : 0000000000000000 r8 : 0000000000000000 r9 : 0000000000000000 r10 : 0000000000000000 r11 : 0000000000000050 r12 : e00000087d147da0 r13 : e00000087d140000 r14 : 0000000000000001 r15 : 0000000000000000 r16 : a0000001007000c8 r17 : 0000000000002d35 r18 : 0000000000000001 r19 : 0000000000000000 r20 : e0000008721a5780 r21 : e0000040fa7305a8 r22 : a0000001007000c8 r23 : e0000040fa7306a8 r24 : e0000040fa7306a0 r25 : 0000000000000008 r26 : 0000000000000000 r27 : a0000001007000d8 r28 : a00000020017d170 r29 : a0000001007a7d20 r30 : 0000000000000000 r31 : e00000087dcca800 =20 Call Trace: [] show_stack+0x80/0xa0 sp=E00000087d147900 bsp=E00000087d1413c8 [] die+0x180/0x220 sp=E00000087d147ad0 bsp=E00000087d141390 [] ia64_fault+0x110/0xa40 sp=E00000087d147ad0 bsp=E00000087d141348 [] ia64_leave_kernel+0x0/0x260 sp=E00000087d147bd0 bsp=E00000087d141348 [] scan_async+0xa0/0x340 [ehci_hcd] sp=E00000087d147da0 bsp=E00000087d1412c8 [] ehci_work+0x80/0x240 [ehci_hcd] sp=E00000087d147da0 bsp=E00000087d141298 [] ehci_stop+0x250/0x460 [ehci_hcd] sp=E00000087d147da0 bsp=E00000087d141268 [] usb_hcd_pci_remove+0x170/0x3c0 [usbcore] sp=E00000087d147df0 bsp=E00000087d141228 [] usb_hcd_pci_probe+0x8a0/0x940 [usbcore] sp=E00000087d147e00 bsp=E00000087d141198 [] pci_device_probe_static+0xc0/0x120 sp=E00000087d147e10 bsp=E00000087d141168 [] __pci_device_probe+0xa0/0xe0 sp=E00000087d147e10 bsp=E00000087d141140 [] pci_device_probe+0x50/0xa0 sp=E00000087d147e10 bsp=E00000087d141118 [] bus_match+0xc0/0x120 sp=E00000087d147e10 bsp=E00000087d1410e0 [] driver_attach+0x120/0x1e0 sp=E00000087d147e10 bsp=E00000087d1410a8 [] bus_add_driver+0x100/0x1a0 sp=E00000087d147e10 bsp=E00000087d141070 [] driver_register+0xc0/0xe0 sp=E00000087d147e10 bsp=E00000087d141050 [] pci_register_driver+0xe0/0x120 sp=E00000087d147e30 bsp=E00000087d141028 [] init+0xa0/0x120 [ehci_hcd] sp=E00000087d147e30 bsp=E00000087d141000 [] sys_init_module+0x390/0x680 sp=E00000087d147e30 bsp=E00000087d140f80 [] ia64_ret_from_syscall+0x0/0x20 sp=E00000087d147e30 bsp=E00000087d140f80 And then the machine is dead. Any ideas? Andreas. --=20 Andreas Schwab, SuSE Labs, schwab@suse.de SuSE Linux AG, Deutschherrnstr. 15-19, D-90429 N=FCrnberg Key fingerprint =3D 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different."