Linux version 2.6.0-test9 (root@acpi-lion) (gcc version 3.2) #9 SMP Thu Nov 20 01:31:09 CST 2003
EFI v1.02 by INTEL: SALsystab=0x7ff26170 ACPI=0x7fe963e8 ACPI 2.0=0x7fe96630 MPS=0x7ffd0000 SMBIOS=0xf00a0
ACPI: RSDP (v002  INTEL                                    ) @ 0x000000007fe96630
ACPI: XSDT (v001  INTEL  SR460AC 0x00000003 MSFT 0x0100000a) @ 0x000000007fe96658
ACPI: FADT (v003  INTEL  SR460AC 0x00000006 MSFT 0x0100000a) @ 0x000000007fe96700
ACPI: MADT (v001  INTEL  SR460AC 0x0000000a MSFT 0x0100000a) @ 0x000000007fe96838
ACPI: DSDT (v001  INTEL SR460AC4 0x00000006 MSFT 0x0100000a) @ 0x0000000000000000
Warning: acpi_table_parse(ACPI_SRAT) returned 0!
Warning: acpi_table_parse(ACPI_SLIT) returned 0!
efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
efi.trim_top: ignoring 448KB of memory at 0x1000 due to granule hole at 0x0
efi.trim_top: ignoring 4KB of memory at 0x71000 due to granule hole at 0x0
efi.trim_top: ignoring 8KB of memory at 0x72000 due to granule hole at 0x0
efi.trim_top: ignoring 100KB of memory at 0x87000 due to granule hole at 0x0
efi.trim_bottom: ignoring 64512KB of memory at 0x100000 due to granule hole at 0x0
SAL v3.00: oem=INTEL   MSL     REF     SAL     , product=
SAL: entry: pal_proc=0x7ff48010, sal_proc=0x7feb53e0
SAL: Platform features BusLock IRQ_Redirection
SAL: AP wakeup using external interrupt vector 0xf0
CPU 0: 51 virtual and 44 physical address bits
iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address 0xc0000000fee00000
ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled)
CPU 0 (0x0000) enabled (BSP)
ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x02] lsapic_eid[0x00] enabled)
CPU 1 (0x0200) enabled
ACPI: LSAPIC (acpi_id[0x02] lsapic_id[0x01] lsapic_eid[0x00] enabled)
CPU 2 (0x0100) enabled
ACPI: LSAPIC (acpi_id[0x03] lsapic_id[0x03] lsapic_eid[0x00] enabled)
CPU 3 (0x0300) enabled
ACPI: LSAPIC (acpi_id[0x04] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 4 (0xaa00) disabled
ACPI: LSAPIC (acpi_id[0x05] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 5 (0xaa00) disabled
ACPI: LSAPIC (acpi_id[0x06] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 6 (0xaa00) disabled
ACPI: LSAPIC (acpi_id[0x07] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 7 (0xaa00) disabled
ACPI: IOSAPIC (id[0x4] global_irq_base[0x0] address[00000000fec00000])
  IOSAPIC v2.1, address 0xfec00000, GSIs 0x0-0x3f
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x1] id[0x0003] eid[0x0] iosapic_vector[0x2] global_irq[0]
PLATFORM int 0x1: GSI 0x3d(low,edge) -> CPU 0x0300 vector 2
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x3] type[0x3] id[0x0003] eid[0x0] iosapic_vector[0x1e] global_irq[]
PLATFORM int 0x3: GSI 0x3c(low,level) -> CPU 0x0300 vector 30
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
4 CPUs available, 8 CPUs total
Registering legacy COM ports for serial console
Mca related initialization done
Virtual mem_map starts at 0xa0007fffff600000
On node 0 totalpages: 126085
  DMA zone: 126085 pages, LIFO batch:4
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\vmlinu.26acpi  root=/dev/sda2 console=ttyS0,9600n8 console=to
fpswa interface at 7fb34010 (rev 1.12)
PID hash table entries: 4096 (order 12: 65536 bytes)
CPU 0: base freq=133.332MHz, ITC ratio=12/2, ITC freq=799.996MHz+/--1ppm
Console: colour VGA+ 80x25
Placing software IO TLB between 0xe000000005564000 - 0xe000000005764000
Memory: 2003520k/2017360k available (7039k code, 24000k reserved, 3251k data, 240k init)
McKinley Errata 9 workaround not needed; disabling it
Calibrating delay loop... 797.80 BogoMIPS
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
POSIX conformance testing by UNIFIX
Boot processor id 0x0/0x0
task migration cache decay timeout: 10 msecs.
Starting migration thread for cpu 0
Bringing up 1
Processor 512/1 is spinning up...
CPU 1: 51 virtual and 44 physical address bits
CPU 1: base freq=133.332MHz, ITC ratio=12/2, ITC freq=799.996MHz+/--1ppm
Calibrating delay loop... 797.80 BogoMIPS
CPU 1: synchronized ITC with CPU 0 (last diff 4 cycles, maxerr 558 cycles)
CPU1: CPU has booted.
Processor 1 has spun up...
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
Bringing up 2
Processor 256/2 is spinning up...
CPU 2: 51 virtual and 44 physical address bits
CPU 2: base freq=133.332MHz, ITC ratio=12/2, ITC freq=799.996MHz+/--1ppm
Calibrating delay loop... 797.80 BogoMIPS
CPU 2: synchronized ITC with CPU 0 (last diff 4 cycles, maxerr 558 cycles)
CPU2: CPU has booted.
Processor 2 has spun up...
CPU 2 IS NOW UP!
Starting migration thread for cpu 2
Bringing up 3
Processor 768/3 is spinning up...
CPU 3: 51 virtual and 44 physical address bits
CPU 3: base freq=133.332MHz, ITC ratio=12/2, ITC freq=799.996MHz+/--1ppm
Calibrating delay loop... 797.80 BogoMIPS
CPU 3: synchronized ITC with CPU 0 (last diff 4 cycles, maxerr 558 cycles)
CPU3: CPU has booted.
Processor 3 has spun up...
CPU 3 IS NOW UP!
Starting migration thread for cpu 3
CPUS done 16
Total of 4 processors activated (3189.20 BogoMIPS).
NET: Registered protocol family 16
ACPI: Subsystem revision 20031002
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:..................................................................................
Table [DSDT](id F004) - 934 Objects with 101 Devices 174 Methods 19 Regions
ACPI Namespace successfully loaded at root a00000010096e6e0
evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
evgpeblk-0748 [06] ev_create_gpe_block   : GPE 00 to 15 [_GPE] 2 regs at 0000000000000C0C on int 9
evgpeblk-0748 [06] ev_create_gpe_block   : GPE 16 to 31 [_GPE] 2 regs at 0000000000000C16 on int 9
Completing Region/Field/Buffer/Package initialization:.......................................................
Initialized 19/19 Regions 0/0 Fields 24/24 Buffers 12/12 Packages (942 nodes)
Executing all Device _STA and_INI methods:....................................................................
94 Devices found containing: 94 _STA, 7 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware on bus (0000:00)
alloc 0x0-0xcf7 from PCI IO for PCI Bus 0000:00 failed
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware on bus (0000:01)
ACPI: PCI Root Bridge [PCI2] (00:04)
PCI: Probing PCI hardware on bus (0000:04)
ACPI: PCI Root Bridge [PCI3] (00:08)
PCI: Probing PCI hardware on bus (0000:08)
ACPI: PCI Root Bridge [PCI4] (00:0c)
PCI: Probing PCI hardware on bus (0000:0c)
ACPI: PCI Root Bridge [PCI5] (00:0f)
PCI: Probing PCI hardware on bus (0000:0f)
ACPI: PCI Root Bridge [PCI6] (00:12)
PCI: Probing PCI hardware on bus (0000:12)
ACPI: PCI Root Bridge [CBN] (00:15)
PCI: Probing PCI hardware on bus (0000:15)
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver hub
IOSAPIC: vector 54 -> CPU 0x0000, enabled
 pci_irq-0302 [03] acpi_pci_irq_derive   : Unable to derive IRQ for device 0000:00:03.3
ACPI: No IRQ known for interrupt pin B of device 0000:00:03.3
IOSAPIC: vector 55 -> CPU 0x0000, enabled
IOSAPIC: vector 56 -> CPU 0x0000, enabled
IOSAPIC: vector 61 -> CPU 0x0000, enabled
IOSAPIC: vector 62 -> CPU 0x0000, enabled
IOSAPIC: vector 62 -> CPU 0x0000, enabled
IOSAPIC: vector 77 -> CPU 0x0000, enabled
IOSAPIC: vector 77 -> CPU 0x0000, enabled
IOSAPIC: vector 84 -> CPU 0x0000, enabled
IOSAPIC: vector 84 -> CPU 0x0000, enabled
PCI: Using ACPI for IRQ routing
perfmon: version 2.0 IRQ 238
perfmon: Itanium PMU detected, 14 PMCs, 18 PMDs, 4 counters (32 bits)
EFI Variables Facility v0.06 2002-Dec-10
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
pty: 256 Unix98 ptys configured
EFI Time Services Driver v0.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
bonding.c:v2.4.1 (September 15, 2003)
bonding_init(): either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwis.
bond0 registered without MII link monitoring, in load balancing (round-robin) mode.
bond0 registered without ARP monitoring
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: Found IRQ 55 for device 0000:00:05.0
IOSAPIC: vector 55 -> CPU 0x0000, enabled
eth0: 0000:00:05.0, 00:D0:B7:F9:F4:F6, IRQ 55.
  Board assembly 727095-004, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: LS-120 S200 01 UHD Floppy, ATAPI FLOPPY drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 34
ide1 at 0x170-0x177,0x376 on irq 33
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
hda: No disk in drive
hda: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
PCI: Found IRQ 61 for device 0000:01:02.0
IOSAPIC: vector 61 -> CPU 0x0000, enabled
qla1280: QLA12160 found on PCI bus 1, dev 2
scsi(0): Reading NVRAM
scsi(0:0): Resetting SCSI BUS
scsi(0:1): Resetting SCSI BUS
PCI: Found IRQ 61 for device 0000:01:02.0
IOSAPIC: vector 61 -> CPU 0x0000, enabled
scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter: bus 1 device 2 irq 61
       Firmware version: 10.04.32, Driver version 3.23.37
  Vendor: SEAGATE   Model: ST39205LC         Rev: 5063
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi(0:0:0:0): Sync: period 9, offset 24, Wide, DT, Tagged queuing: depth 255
megaraid: v2.00.3 (Release Date: Wed Feb 19 08:51:30 EST 2003)
st: Version 20030811, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.0
osst :I: $Id: osst.c,v 1.68 2002/12/23 16:33:36 riede Exp $
SCSI device sda: 17921835 512-byte hdwr sectors (9176 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Fusion MPT base driver 2.05.00.03
Copyright (c) 1999-2002 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.00.03
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 54 for device 0000:00:03.2
IOSAPIC: vector 54 -> CPU 0x0000, enabled
uhci_hcd 0000:00:03.2: UHCI Host Controller
uhci_hcd 0000:00:03.2: irq 54, io base 0000000000006f80
uhci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
drivers/usb/host/uhci-hcd.c: detected 2 ports
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.0-test9 uhci_hcd
usb usb1: SerialNumber: 0000:00:03.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
hub 1-0:1.0: new USB device on port 1, assigned address 2
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 36
usb 1-1: Product: USB Wheel Mouse
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:03.2-1
input: AT Raw Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 32
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 240kB freed




Synchronizing SCSI cache for disk sda:
Power down.
acpi_power_off called
 hwsleep-0257 [01] acpi_enter_sleep_state: Entering sleep state [S5]
