From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Yu, Luming" Date: Wed, 19 Nov 2003 12:46:50 +0000 Subject: RE: Latest 2.6 IA64 Baseline (Mosberger) testing report Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-ia64@vger.kernel.org It boot with any hang, but Leagcy keyboard hang. --Luming > -----Original Message----- > From: Yu, Luming =20 > Sent: 2003=C4=EA11=D4=C219=C8=D5 20:43 > To: linux-acpi > Cc: linux-ia64@vger.kernel.org > Subject: Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) >=20 > ACPI Test Report for 2.6 ia64 kernel=20 > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> Hardware Configuration: > ----------------------- > System Name: ACPI-LION > System Type: 4 way 800M Itanium, Lion > M/B revision: N/A > Processor version: N/A > Firmware Versions: N/A > I/O configuration summary: > QLogic QLA12160, Seagate ST39205LC boot drive > IDE floppy and CDROM > Serial console > PS/2 keyboard and mouse > USB mouse > Ethernet Pro 100 >=20 > Software Configuration: > ----------------------- > 1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/19 (Shanghai= time) > 2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 11/= 19 (Shanghai time) > Successfully automerged by bk without out any manually work. >=20 > 3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve = kernel unaligned access when pressing power button >=20 >=20 > ACPI Features Tested: (prioritized). > -------------------- > 1. Boot tested ok > 2. serial console tested ok > 3. PS/2 keyboard only work for a few minutes, then hang > 4. ATI (run X window system) tested ok > 5. PS/2 mouse tested ok > 6. USB mouse tested ok > 7. NIC (eg. Ping or ftp) tested ok > 8. IDE (eg. r/w floppy or CDROM) tested ok > 9. SCI (eg. Press power button) tested ok > 10. Soft Power off tested ok >=20 > CPU0 CPU1 CPU2 CPU3 > 29: 0 0 0 0 LSAPIC cmc_poll > 30: 0 0 0 0 IO-SAPIC-level cpe_hnd= lr > 31: 0 0 0 0 LSAPIC cmc_hnd= lr > 32: 724 4 32 0 IO-SAPIC-edge i8042 > 33: 493 0 9 0 IO-SAPIC-edge ide1 > 34: 34 0 4 0 IO-SAPIC-edge ide0 > 36: 777 31 46 0 IO-SAPIC-edge i8042 > 39: 2 0 0 0 IO-SAPIC-level acpi > 44: 16 0 3 0 IO-SAPIC-edge serial > 45: 14 0 3 0 IO-SAPIC-edge serial > 54: 1656 9 78 2 IO-SAPIC-level uhci_hcd > 55: 1032 5 55 1 IO-SAPIC-level eth0 > 61: 5520 13 279 1 IO-SAPIC-level qla1280 > 232: 0 0 0 0 LSAPIC mca_rdzv > 238: 0 0 0 0 LSAPIC perfmon > 239: 354543 349871 349425 348988 LSAPIC timer > 240: 0 0 0 0 LSAPIC mca_wkup > 254: 154 126 218 183 LSAPIC IPI > NMI: 0 0 0 0 > ERR: 0 >=20 > Problems: >=20 > 1. PS/2 keyboard only work for a few minutes, then hang. >=20 > 2.alloc 0x0-0xcf7 from PCI IO for PCI Bus 0000:00 failed. (known issue) >=20 > 3.ACPI: No IRQ known for interrupt pin B of device 0000:00:03.3. (Known i= ssue) >=20 > << File: dmesg.26.TXT (Compressed) >> << File: 2.6.config.TXT (Compress= ed) >> << File: lspci.26.TXT (Compressed) >>=20 > Thanks, > Luming >=20 >=20