flushing ide devices: hda hdc
Restarting system.
kZLinux version 2.4.23-rc1 (root@acpi-lion) (gcc version 3.2) #13 SMP Wed Nov 19 23:55:05 CST 2003
EFI v1.02 by INTEL: SALsystab=0x7ff26170 ACPI=0x7fe963e8 ACPI 2.0=0x7fe96630 MPS=0x7ffd0000 SMBIOS=0xf00a0
ACPI: RSDP (v002  INTEL                                    ) @ 0x000000007fe96630
ACPI: XSDT (v001  INTEL  SR460AC 0x00000003 MSFT 0x0100000a) @ 0x000000007fe96658
ACPI: FADT (v003  INTEL  SR460AC 0x00000006 MSFT 0x0100000a) @ 0x000000007fe96700
ACPI: MADT (v001  INTEL  SR460AC 0x0000000a MSFT 0x0100000a) @ 0x000000007fe96838
ACPI: DSDT (v001  INTEL SR460AC4 0x00000006 MSFT 0x0100000a) @ 0x0000000000000000
efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
efi.trim_top: ignoring 448KB of memory at 0x1000 due to granule hole at 0x0
efi.trim_top: ignoring 4KB of memory at 0x71000 due to granule hole at 0x0
efi.trim_top: ignoring 8KB of memory at 0x72000 due to granule hole at 0x0
efi.trim_top: ignoring 100KB of memory at 0x87000 due to granule hole at 0x0
efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to granule hole at 0x0
SAL v3.00: oem=INTEL   MSL     REF     SAL     , product=
SAL: entry: pal_proc=0x7ff48010, sal_proc=0x7feb53e0
SAL: Platform features BusLock IRQ_Redirection
SAL: AP wakeup using external interrupt vector 0xf0
booting generic kernel on platform dig
CPU 0: 51 virtual and 44 physical address bits
iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address 0xc0000000fee00000
ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled)
CPU 0 (0x0000) enabled (BSP)
ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x01] lsapic_eid[0x00] enabled)
CPU 1 (0x0100) enabled
ACPI: LSAPIC (acpi_id[0x02] lsapic_id[0x02] lsapic_eid[0x00] enabled)
CPU 2 (0x0200) enabled
ACPI: LSAPIC (acpi_id[0x03] lsapic_id[0x03] lsapic_eid[0x00] enabled)
CPU 3 (0x0300) enabled
ACPI: LSAPIC (acpi_id[0x04] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 4 (0xaa00) disabled
ACPI: LSAPIC (acpi_id[0x05] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 5 (0xaa00) disabled
ACPI: LSAPIC (acpi_id[0x06] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 6 (0xaa00) disabled
ACPI: LSAPIC (acpi_id[0x07] lsapic_id[0xaa] lsapic_eid[0x00] disabled)
CPU 7 (0xaa00) disabled
ACPI: IOSAPIC (id[0x4] global_irq_base[0x0] address[00000000fec00000])
  IOSAPIC v2.1, address 0xfec00000, GSIs 0x0-0x3f
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x1] id[0x0003] eid[0x0] iosapic_vector[0x2] global_irq[0]
PLATFORM int 0x1: GSI 0x3d(low,edge) -> CPU 0x0300 vector 2
ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x3] type[0x3] id[0x0003] eid[0x0] iosapic_vector[0x1e] global_irq[]
PLATFORM int 0x3: GSI 0x3c(low,level) -> CPU 0x0300 vector 30
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
4 CPUs available, 8 CPUs total
On node 0 totalpages: 129240
zone(0): 129240 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\vmlinu.24acpi  root=/dev/sda2 console=ttyS0,9600n8 console=to
FPSWA interface at 0x7fb34010, revision 1.12
CPU 0: base freq=133.333MHz, ITC ratio=12/2, ITC freq=799.998MHz
Console: colour VGA+ 80x25
Calibrating delay loop... 797.80 BogoMIPS
Placing software IO TLB between 0xe000000001b0c000 - 0xe000000001d0c000
Memory: 2054464k/2067840k available (5966k code, 13440k reserved, 2913k data, 528k init)
Dentry cache hash table entries: 131072 (order: 7, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 7, 2097152 bytes)
Mount cache hash table entries: 1024 (order: 0, 16384 bytes)
Buffer cache hash table entries: 131072 (order: 6, 1048576 bytes)
Page-cache hash table entries: 131072 (order: 6, 1048576 bytes)
POSIX conformance testing by UNIFIX
Boot processor id 0x0/0x0
SMP: starting up secondaries.
CPU 1: 51 virtual and 44 physical address bits
CPU 1: base freq=133.333MHz, ITC ratio=12/2, ITC freq=799.998MHz
Calibrating delay loop... 797.80 BogoMIPS
CPU 1: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 548 cycles)
CPU1: CPU has booted.
CPU 2: 51 virtual and 44 physical address bits
CPU 2: base freq=133.333MHz, ITC ratio=12/2, ITC freq=799.998MHz
Calibrating delay loop... 797.80 BogoMIPS
CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 548 cycles)
CPU2: CPU has booted.
CPU 3: 51 virtual and 44 physical address bits
CPU 3: base freq=133.333MHz, ITC ratio=12/2, ITC freq=799.998MHz
Calibrating delay loop... 797.80 BogoMIPS
CPU 3: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 548 cycles)
CPU3: CPU has booted.
Before bogomips.
Total of 4 processors activated (3189.20 BogoMIPS).
Waiting on wait_init_idle (map = 0xe)
All processors have done init_idle
ACPI: Subsystem revision 20031002
PCI: Using SAL to access configuration space
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:..................................................................................
Table [DSDT](id F004) - 934 Objects with 101 Devices 174 Methods 19 Regions
ACPI Namespace successfully loaded at root e000000004c2f4a8
evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
evgpeblk-0748 [06] ev_create_gpe_block   : GPE 00 to 15 [_GPE] 2 regs at 0000000000000C0C on int 9
evgpeblk-0748 [06] ev_create_gpe_block   : GPE 16 to 31 [_GPE] 2 regs at 0000000000000C16 on int 9
Completing Region/Field/Buffer/Package initialization:.......................................................
Initialized 19/19 Regions 0/0 Fields 24/24 Buffers 12/12 Packages (942 nodes)
Executing all Device _STA and_INI methods:....................................................................
94 Devices found containing: 94 _STA, 7 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Root Bridge [PCI1] (00:01)
ACPI: PCI Root Bridge [PCI2] (00:04)
ACPI: PCI Root Bridge [PCI3] (00:08)
ACPI: PCI Root Bridge [PCI4] (00:0c)
ACPI: PCI Root Bridge [PCI5] (00:0f)
ACPI: PCI Root Bridge [PCI6] (00:12)
ACPI: PCI Root Bridge [CBN] (00:15)
PCI->APIC IRQ transform: (00:03.2 INTD) -> CPU 0x0000 vector 48
PCI: no interrupt route for 00:00:03 pin B
PCI->APIC IRQ transform: (00:05.0 INTA) -> CPU 0x0000 vector 49
PCI->APIC IRQ transform: (00:06.0 INTA) -> CPU 0x0000 vector 50
PCI->APIC IRQ transform: (01:02.0 INTA) -> CPU 0x0000 vector 51
PCI->APIC IRQ transform: (01:0f.0 INTA) -> CPU 0x0000 vector 52
PCI->APIC IRQ transform: (04:0f.0 INTA) -> CPU 0x0000 vector 52
PCI->APIC IRQ transform: (08:0f.0 INTA) -> CPU 0x0000 vector 53
PCI->APIC IRQ transform: (0c:0f.0 INTA) -> CPU 0x0000 vector 53
PCI->APIC IRQ transform: (0f:0f.0 INTA) -> CPU 0x0000 vector 54
PCI->APIC IRQ transform: (12:0f.0 INTA) -> CPU 0x0000 vector 54
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
PAL Information Facility v0.5
EFI Variables Facility v0.06 2002-Dec-10
Total HugeTLB memory allocated, 0
Starting kswapd
Journalled Block Device driver loaded
Hugetlbfs mounted.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ DETECT_IRQ SERIAL_PCI ISAPNP SERIAL_ACPI ed
ttyS00 at 0x03f8 (irq = 44) is a 16550A
ttyS01 at 0x02f8 (irq = 45) is a 16550A
ttyS00 at port 0x03f8 (irq = 44) is a 16550A
ttyS01 at port 0x02f8 (irq = 45) is a 16550A
EFI Time Services Driver v0.4
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: Found IRQ 49 for device 00:05.0
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:F9:F4:F6, IRQ 49.
  Board assembly 727095-004, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 1892M
[drm] Initialized r128 2.2.0 20010917 on minor 0
[drm] Initialized radeon 1.7.0 20020828 on minor 1
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:03.1
PCI: Found IRQ 0 for device 00:03.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
hda: LS-120 S200 01 UHD Floppy, ATAPI FLOPPY drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
global_restore_flags: 10084a6010 (e000000004abbf60)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 34
global_restore_flags: 10084a2010 (e000000004abbf60)
ide1 at 0x170-0x177,0x376 on irq 33
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
hda: attached ide-floppy driver.
hda: No disk in drive
hda: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 51 for device 01:02.0
qla1280: QLA12160 found on PCI bus 1, dev 2
scsi(0): Reading NVRAM
scsi(0:0): Resetting SCSI BUS
scsi(0:1): Resetting SCSI BUS
PCI: Found IRQ 51 for device 01:02.0
scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter: bus 1 device 2 irq 51
       Firmware version: 10.04.32, Driver version 3.23.37
  Vendor: SEAGATE   Model: ST39205LC         Rev: 5063
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi(0:0:0:0): Sync: period 9, offset 24, Wide, DT, Tagged queuing: depth 255
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 17921835 512-byte hdwr sectors (9176 MB)
Partition check:
 sda: sda1 sda2 sda3
Fusion MPT base driver 2.05.05+
Copyright (c) 1999-2002 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.05+
cs4281: version v1.30.64 time 22:01:58 Nov 19 2003
cs4281: Unable to locate any cs4281 device with valid IDs 0x1013-0x6005
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 23:55:22 Nov 19 2003
host/usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 48 for device 00:03.2
host/usb-uhci.c: USB UHCI at I/O 0x6f80, IRQ 48
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
Product: USB UHCI Root Hub
SerialNumber: 6f80
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 528kB freed
hub.c: new USB device 00:03.2-2, assigned address 2
Product: USB Wheel Mouse
host/usb-uhci.c: interrupt, status 3, frame# 1415
input: USB HID v1.00 Mouse [04fc:0003] on usb1:2.0
ide-floppy: hda: I/O error, pc =  0, key =  2, asc = 3a, ascq =  0
ide-floppy: hda: I/O error, pc = 1b, key =  2, asc = 3a, ascq =  0
hda: No disk in drive

flushing ide devices: hda hdc
Power down.
 hwsleep-0257 [01] acpi_enter_sleep_state: Entering sleep state [S5]

