ACPI Test Report  for 2.6 ia64 kernel 
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	QLogic QLA12160, Seagate ST39205LC boot drive
	IDE floppy and CDROM
	Serial console
	PS/2 keyboard and mouse
	USB mouse
	Ethernet Pro 100

Software Configuration:
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/26 (Shanghai time)

	2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 11/26 (Shanghai time)
		failed. 

 	3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve  kernel unaligned access when pressing power button 

ACPI Features Tested: (prioritized).
--------------------
1. Boot 				tested ok
2. serial console			Didn't test
3. PS/2 keyboard			tested ok
4. ATI (run X window system)		tested ok
5. PS/2 mouse				tested ok
6. USB mouse				tested ok
7. NIC (eg. Ping or ftp)		tested ok
8. IDE (eg. r/w floppy or CDROM)	tested ok
9. SCI (eg. Press power button)		tested ok
10. Soft Power off				tested ok

           CPU0       CPU1       CPU2       CPU3       
 29:          0          0          0          0          LSAPIC  cmc_poll
 30:          0          0          0          0  IO-SAPIC-level  cpe_hndlr
 31:          0          0          0          0          LSAPIC  cmc_hndlr
 32:       1379          4          0         10   IO-SAPIC-edge  i8042
 33:        583         19          0         11   IO-SAPIC-edge  ide1
 34:         22         10          0          6   IO-SAPIC-edge  ide0
 36:        565          1          0         53   IO-SAPIC-edge  i8042
 39:          5          0          0          0  IO-SAPIC-level  acpi
 45:         11          5          0          0   IO-SAPIC-edge  serial
 54:       2415          4          0          0  IO-SAPIC-level  uhci_hcd
 55:       2958         46          4          2  IO-SAPIC-level  eth0
 61:       9152        320          3         15  IO-SAPIC-level  qla1280
232:          0          0          0          0          LSAPIC  mca_rdzv
238:          0          0          0          0          LSAPIC  perfmon
239:    1899520    1894834    1889372    1883893          LSAPIC  timer
240:          0          0          0          0          LSAPIC  mca_wkup
254:         84        135        109        128          LSAPIC  IPI
NMI:          0          0          0          0 
ERR:          0

Problems:

1. Failed to bk pull http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 , Error message was

	" Entire  repository is locked by:
		RESYNC directory.
	ERROR-Unable to lock repository for update"

2.alloc 0x0-0xcf7 from PCI IO for PCI Bus 0000:00 failed. (known issue)

3.ACPI: No IRQ known for interrupt pin B of device 0000:00:03.3. (Known issue)
 <<2.6.config.ZIP>>  <<dmesg.26.ZIP>>  <<lspci.26.ZIP>> 
Thanks
Luming