ACPI Test Report  for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	QLogic QLA12160, Seagate ST39205LC boot drive
	IDE floppy and CDROM
	Serial console
	PS/2 keyboard and mouse
	USB mouse
	Ethernet Pro 100

Software Configuration:
-----------------------
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 11/26 (Shanghai time)
	2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 11/26 (Shanghai time)
		failed
	3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533  to solve  kernel unaligned access when pressing power button

ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk			tested ok
2. serial console			didn't test
3. PS/2 keyboard			tested ok
4. ATI (run X window system)		tested ok
5. PS/2 mouse				tested ok
6. USB mouse				Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp)		tested ok
8. IDE (eg. r/w floppy or CDROM)	didn't test
9. SCI (eg. Press power button)		tested ok
10. Soft Power off				tested ok

           CPU0       CPU1       CPU2       CPU3       
 32:        515          2          0          1   IO-SAPIC-edge  keyboard
 33:          2          0          0          0   IO-SAPIC-edge  ide1
 34:          4          0          0         33   IO-SAPIC-edge  ide0
 36:         20          0          0          0   IO-SAPIC-edge  PS/2 Mouse
 39:          5          0          0          0  IO-SAPIC-level  acpi
 45:         17          0          0          0   IO-SAPIC-edge  serial
 48:         43          0          0          0  IO-SAPIC-level  usb-uhci
 49:        193          0          0          4  IO-SAPIC-level  eth0
 51:       3631         10          3        169  IO-SAPIC-level  qla1280
239:     181356     180392     180014     161679          LSAPIC  timer
254:      12686      13140      12899      12983          LSAPIC  IPI
NMI:          0          0          0          0 
ERR:          0

Problems:

1. Failed to bk pull  http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22  , Error message was

	" Entire  repository is locked by:
		RESYNC directory.
	ERROR-Unable to lock repository for update"

2.PCI: no interrupt route for 00:00:03 pin B. 
 <<lion.dsl.ZIP>> 
3. alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed   (Known issue)

4. hda:end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 1
end_request: I/O error, dev 03:00 (hda), sector 2


 <<dmesg.24.TXT>>  <<2.4.config.TXT>>  <<lspci.24.TXT>> 
Thanks
Luming