ACPI Test Report  for 2.6 ia64 kernel 
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	QLogic QLA12160, Seagate ST39205LC boot drive
	IDE floppy and CDROM
	Serial console
	PS/2 keyboard and mouse
	USB mouse
	Ethernet Pro 100

Software Configuration:
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 12/3 (Shanghai time)
	2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 12/3 (Shanghai time)
 	3.patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve  kernel unaligned access when pressing power button 
	Resolved 1 conflict by hand.(Take change from linux-ia64-2.5)

ACPI Features Tested: (prioritized).
--------------------
1. Boot 				tested ok
2. serial console			tested ok
3. PS/2 keyboard			After about 5 minutes, keyboard doesn't respond.
4. ATI (run X window system)		tested ok
5. PS/2 mouse				tested ok
6. USB mouse				tested ok
7. NIC (eg. Ping or ftp)		tested ok
8. IDE (eg. r/w floppy or CDROM)	tested ok
9. SCI (eg. Press power button)		tested ok
10. Soft Power off 			tested ok

           CPU0       CPU1       CPU2       CPU3
 29:          0          0          0          0          LSAPIC  cmc_poll
 30:          0          0          0          0  IO-SAPIC-level  cpe_hndlr
 31:          0          0          0          0          LSAPIC  cmc_hndlr
 32:       1407          2         10         21   IO-SAPIC-edge  i8042
 33:        638          0          0          2   IO-SAPIC-edge  ide1
 34:         12          0         12         14   IO-SAPIC-edge  ide0
 36:        465         32         21          0   IO-SAPIC-edge  i8042
 39:          4          0          0          0  IO-SAPIC-level  acpi
 44:          6          0          0          2   IO-SAPIC-edge  serial
 45:         15          0          0          2   IO-SAPIC-edge  serial
 54:       2082          4         30          0  IO-SAPIC-level  uhci_hcd
 55:       2184          0         28         52  IO-SAPIC-level  eth0
 61:       8850          1         15        279  IO-SAPIC-level  qla1280
232:          0          0          0          0          LSAPIC  mca_rdzv
238:          0          0          0          0          LSAPIC  perfmon
239:     727038     722365     716577     711104          LSAPIC  timer
240:          0          0          0          0          LSAPIC  mca_wkup
254:        141        165        273        267          LSAPIC  IPI
NMI:          0          0          0          0
ERR:          0

Problems:

1.After login about 5 minutes, keyboard doesn't respond.

2.PCI: no interrupt route for 00:00:03 pin B. (Known issue)

3. alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed   (Known issue)

4. ide-floppy: hda: I/O error, pc =  0, key =  2, asc = 3a, ascq =  0
ide-floppy: hda: I/O error, pc = 1b, key =  2, asc = 3a, ascq =  0
 <<lspci.26.ZIP>>  <<dmesg.26.ZIP>>  <<2.6.config.ZIP>> 
Thanks,
Luming