ACPI Test Report  for 2.6 ia64 kernel 
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	MPT scsi host driver
	Seagate ST318406LC boot drive
	IDE floppy and CDROM
	Serial console
	USB mouse
	Ethernet Pro 1000

Software Configuration:
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 12/3 (Shanghai time)
	2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 12/3 (Shanghai time)
	3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1634 to fix compile-time bug.

	Resolved 1 conflict by hand.(Take change from linux-ia64-2.5)

ACPI Features Tested: (prioritized).
--------------------
1. Boot 				tested ok
2. serial console			tested ok
3. ATI (run X window system)		tested ok
4. PS/2 mouse				tested ok
5. USB mouse				tested ok
6. NIC (eg. Ping or ftp)		tested ok
7. IDE (eg. r/w floppy or CDROM)	tested ok
8. SCI (eg. Press power button)		tested ok
9. Soft Power off 				tested ok


           CPU0       CPU1       CPU2       CPU3
 29:          0          0          0          0          LSAPIC  cmc_poll
 30:          0          0          0          0  IO-SAPIC-level  cpe_hndlr
 31:          0          0          0          0          LSAPIC  cmc_hndlr
 34:          1          0         63          0   IO-SAPIC-edge  ide0
 39:          0          0          4          0  IO-SAPIC-level  acpi
 45:          0          1         94          0   IO-SAPIC-edge  serial
 48:          0          0          0          0  IO-SAPIC-level  ehci_hcd
 49:          1         24       1812          0  IO-SAPIC-level  uhci_hcd
 50:          0          0         40          0  IO-SAPIC-level  uhci_hcd
 51:          0          2        399          0  IO-SAPIC-level  eth0
 56:          7        128       3828          0  IO-SAPIC-level  ioc0
 57:          0          0         42          0  IO-SAPIC-level  ioc1
232:          0          0          0          0          LSAPIC  mca_rdzv
238:          0          0          0          0          LSAPIC  perfmon
239:     203826     198715     198222     197807          LSAPIC  timer
240:          0          0          0          0          LSAPIC  mca_wkup
254:         34         94         87         91          LSAPIC  IPI
NMI:          0          0          0          0
ERR:          0

Problems:
 
Please refer dmesg attached .

[Dmesg, /proc/interrupts, lspci -v , .config are attached below]
 <<2.6.ZIP>> 
Thanks,
Luming