From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Yu, Luming" Date: Wed, 10 Dec 2003 09:41:01 +0000 Subject: Latest 2.4 IA64 Baseline (Bjorn) testing report (Lion) Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org ACPI Test Report for 2.4 ia64 kernel + latest ACPI ============Hardware Configuration: ----------------------- System Name: ACPI-LION System Type: 4 way 800M Itanium, Lion M/B revision: N/A Processor version: N/A Firmware Versions: N/A I/O configuration summary: QLogic QLA12160, Seagate ST39205LC boot drive IDE floppy and CDROM Serial console PS/2 keyboard and mouse USB mouse Ethernet Pro 100 Software Configuration: ----------------------- 1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/10 (Shanghai time) 2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/10 (Shanghai time) 3. patch from http://bugzilla.kernel.org/show_bug.cgi?id33 to solve kernel unaligned access when pressing power button Auto-merged without any manual work. ACPI Features Tested: (prioritized). -------------------- 1. Boot off SCSI disk tested ok 2. serial console tested ok 3. PS/2 keyboard tested ok 4. ATI (run X window system) tested ok 5. PS/2 mouse tested ok 6. USB mouse Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed) 7. NIC (eg. Ping or ftp) tested ok 8. IDE (eg. r/w floppy or CDROM) tested ok 9. SCI (eg. Press power button) tested ok 10. Soft Power off tested ok CPU0 CPU1 CPU2 CPU3 32: 493 8 0 4 IO-SAPIC-edge keyboard 33: 415 16 0 1 IO-SAPIC-edge ide1 34: 34 2 0 2 IO-SAPIC-edge ide0 36: 1226 415 29 51 IO-SAPIC-edge PS/2 Mouse 39: 9 0 0 0 IO-SAPIC-level acpi 45: 17 0 0 0 IO-SAPIC-edge serial 48: 27 0 0 0 IO-SAPIC-level usb-uhci 49: 3637 244 3 4 IO-SAPIC-level eth0 51: 6356 338 18 52 IO-SAPIC-level qla1280 239: 3321412 3311351 3320288 3319986 LSAPIC timer 254: 17988 19901 19438 19488 LSAPIC IPI NMI: 0 0 0 0 ERR: 0 Problems: 1. USB mouse cannot work USB mose doesn't work like previous report. 2.PCI: no interrupt route for 00:00:03 pin B. (Known issue)