From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Miguel Medalha" Subject: Re: Disk errors reported on boot - kernel 2.6.18 Date: Sat, 16 Jun 2007 16:08:39 +0100 Message-ID: <002101c7b028$38bab8d0$0901a8c0@medalha> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="Windows-1252"; reply-type=original Content-Transfer-Encoding: 7bit Return-path: Received: from relay4.ptmail.sapo.pt ([212.55.154.24]:48359 "HELO sapo.pt" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with SMTP id S1757219AbXFPPIz (ORCPT ); Sat, 16 Jun 2007 11:08:55 -0400 Received: from unknown (HELO medalha) (miguelmedalha@sapo.pt@[82.155.48.77]) (envelope-sender ) by mta15 (qmail-ldap-1.03) with SMTP for ; 16 Jun 2007 15:08:51 -0000 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org After my previous message on the same subject, I thought it would be useful to report the following: I recently installed a new disk on the same computer. This one is a Hitchi HDS721616PLAT80. When this disk is connected to the ICH5 controller, the following error lines appear on boot: ------------------------------------------------------------------- hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { DriveStatusError } ide: failed opcode was: 0xb0 ------------------------------------------------------------------- The drive is working perfectly. I even verified it with a tool provided by the manufacturer. SMART also does not report any error . The same disk gives no error whatsoever when connected to a ITE8212 IDE Controler present on the same computer. The overall configuration of this machine was given on my previous post. Thank you for your attention. Best regards Miguel