From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ruben Moretti" Subject: Promise SX4 controllers strange Port1 Issue Date: Fri, 2 Sep 2005 12:35:04 +0200 Message-ID: <005401c5afa9$fb5bd300$1e0a1eac@mmoretti> Reply-To: "Ruben Moretti" Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed reply-type=original Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from ad96e11b2.dsl.de.colt.net ([217.110.17.178]:12177 "EHLO linus.labor-enders.de") by vger.kernel.org with ESMTP id S1030240AbVIBKfP (ORCPT ); Fri, 2 Sep 2005 06:35:15 -0400 Received: from localhost (unknown [127.0.0.1]) by linus.labor-enders.de (Postfix) with ESMTP id CB84F97D5A for ; Fri, 2 Sep 2005 10:35:04 +0000 (UTC) Received: from linus.labor-enders.de ([127.0.0.1]) by localhost (linus.labor-enders.de [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 20092-11-2 for ; Fri, 2 Sep 2005 12:35:04 +0200 (CEST) Received: from mmoretti (pc-moretti.enders.de [172.30.10.30]) by linus.labor-enders.de (Postfix) with SMTP id 2C86B97D52 for ; Fri, 2 Sep 2005 12:35:04 +0200 (CEST) Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hello List Co ;) I'm running 2.6.12 /2.6.13 kernel on a single CPU (P4-Celeron)/Fedora. Board ASROCK 775V88 with 2 Sata ports onboard. (sata_via) With two promise SX4 cards serving seven SATA HDs on their seven channe= ls (RAID). [Card1 Port 2,3,4 - Card2 Port 2,3,4] Now I added HDDs to the controller 1 or 2. All HDs are connected as master; one HD per channel. Now wenn i add the HDDs on Ports 1, I get errors for the added HD, a= nd for the previously installed ones. There's no irq problem and no HD or controller problem (checked this by cross-changing). Tested with kernels 2.6.12 /2.6.13 Log File, one with and one without HDD on Port 1 [Both Cards with HDDs = on Port 2,3,4] Any more ideas or hint? Thanks in advance Ruben Moretti --- Snip with HDD on Port 1 Card 1 Linux version 2.6.12-1.1447_FC4 (bhcompile@decompose.build.redhat.com) = (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Fri Aug 26 20:29:51 EDT 20= 05 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection DMI 2.3 present. Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000) Built 1 zonelists Kernel command line: ro root=3D/dev/md3 acpi=3Doff pci=3Dnoacpi ide=3Dn= odma console=3DttyS0 console=3Dtty0 ide_setup: ide=3Dnodma : Prevented DMA Initializing CPU#0 CPU 0 irqstacks, hard=3Dc0458000 soft=3Dc0457000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2684.955 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033384k/1048256k available (2518k kernel code, 14048k reserved= , 690k data, 184k init, 130752k highmem) Checking if this processor honours the WP bit even in supervisor mode..= =2E Ok. Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is =46reeing initrd memory: 1199k freed NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050729 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/3227] at 0000:00:11.0 PCI: IRQ 0 for device 0000:00:0f.1 doesn't match PIRQ mask - try pci=3Dusepirqmask apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1125392498.474:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 1C1942C715575330 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA PT880 chipset agpgart: AGP aperture is 64M @ 0xf8000000 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabl= ed =FFttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebu= s=3Dxx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 PCI: IRQ 0 for device 0000:00:0f.1 doesn't match PIRQ mask - try pci=3Dusepirqmask PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD400BB-23DEA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: WDC WD400BB-23DEA0, ATA DISK drive hdd: GCR-8523B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 78156288 sectors (40016 MB) native capacity is 78165360 sectors (40020 MB) hda: Host Protected Area disabled. hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=3D65535/16/63 hda: cache flushes not supported hda: hda1 hda2 hda3 hdc: max request size: 128KiB hdc: Host Protected Area detected. current capacity is 78156288 sectors (40016 MB) native capacity is 78165360 sectors (40020 MB) hdc: Host Protected Area disabled. hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=3D65535/16/63 hdc: cache flushes not supported hdc: hdc1 hdc2 hdc3 hdd: ATAPI 52X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 =46reeing unused kernel memory: 184k freed input: AT Translated Set 2 keyboard on isa0060/serio0 SCSI subsystem initialized sata_via(0000:00:0f.0): routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 10 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 10 logips2pp: Detected unknown logitech mouse model 1 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_via Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sda: drive cache: write back SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Local DIMM ECC Enabled ata3: SATA max UDMA/133 cmd 0xF89C0200 ctl 0xF89C0238 bmdma 0x0 irq 5 ata4: SATA max UDMA/133 cmd 0xF89C0280 ctl 0xF89C02B8 bmdma 0x0 irq 5 ata5: SATA max UDMA/133 cmd 0xF89C0300 ctl 0xF89C0338 bmdma 0x0 irq 5 ata6: SATA max UDMA/133 cmd 0xF89C0380 ctl 0xF89C03B8 bmdma 0x0 irq 5 ata3: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata3: dev 0 configured for UDMA/133 scsi2 : sata_sx4 ata4: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata4: dev 0 configured for UDMA/133 scsi3 : sata_sx4 ata5: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata5: dev 0 configured for UDMA/133 scsi4 : sata_sx4 ata6: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata6: dev 0 configured for UDMA/133 scsi5 : sata_sx4 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdc: drive cache: write back sdc:<3>ata3: command timeout ata3: status=3D0x51 { DriveReady SeekComplete Error } ata3: called with no error (51)! SCSI error : <2 0 0 0> return code =3D 0x8000002 sdc: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdc, sector 8 Buffer I/O error on device sdc, logical block 1 ata3: command timeout ata3: status=3D0x51 { DriveReady SeekComplete Error } ata3: called with no error (51)! SCSI error : <2 0 0 0> return code =3D 0x8000002 sdc: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdc, sector 8 Buffer I/O error on device sdc, logical block 1 Dev sdc: unable to read RDB block 8 unknown partition table Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdd: drive cache: write back sdd:<3>ata4: command timeout ata4: status=3D0x51 { DriveReady SeekComplete Error } ata4: called with no error (51)! SCSI error : <3 0 0 0> return code =3D 0x8000002 sdd: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdd, sector 0 Buffer I/O error on device sdd, logical block 0 ata4: command timeout ata4: status=3D0x51 { DriveReady SeekComplete Error } ata4: called with no error (51)! SCSI error : <3 0 0 0> return code =3D 0x8000002 sdd: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdd, sector 0 Buffer I/O error on device sdd, logical block 0 ata4: command timeout ata4: status=3D0x51 { DriveReady SeekComplete Error } ata4: called with no error (51)! SCSI error : <3 0 0 0> return code =3D 0x8000002 sdd: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdd, sector 0 Buffer I/O error on device sdd, logical block 0 unable to read partition table Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sde: drive cache: write back SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sde: drive cache: write back sde:<3>ata5: command timeout ata5: status=3D0x51 { DriveReady SeekComplete Error } ata5: called with no error (51)! SCSI error : <4 0 0 0> return code =3D 0x8000002 sde: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 ata5: command timeout ata5: status=3D0x51 { DriveReady SeekComplete Error } ata5: called with no error (51)! SCSI error : <4 0 0 0> return code =3D 0x8000002 sde: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 ata5: command timeout ata5: status=3D0x51 { DriveReady SeekComplete Error } ata5: called with no error (51)! SCSI error : <4 0 0 0> return code =3D 0x8000002 sde: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 unable to read partition table Attached scsi disk sde at scsi4, channel 0, id 0, lun 0 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdf: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdf: drive cache: write back SCSI device sdf: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdf: drive cache: write back sdf:<3>ata6: command timeout ata6: status=3D0x51 { DriveReady SeekComplete Error } ata6: called with no error (51)! SCSI error : <5 0 0 0> return code =3D 0x8000002 sdf: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdf, sector 0 Buffer I/O error on device sdf, logical block 0 ata6: command timeout ata6: status=3D0x51 { DriveReady SeekComplete Error } ata6: called with no error (51)! SCSI error : <5 0 0 0> return code =3D 0x8000002 sdf: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdf, sector 0 Buffer I/O error on device sdf, logical block 0 ata6: command timeout ata6: status=3D0x51 { DriveReady SeekComplete Error } ata6: called with no error (51)! SCSI error : <5 0 0 0> return code =3D 0x8000002 sdf: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdf, sector 0 Buffer I/O error on device sdf, logical block 0 unable to read partition table Attached scsi disk sdf at scsi5, channel 0, id 0, lun 0 Local DIMM ECC Enabled ata7: SATA max UDMA/133 cmd 0xF8B40200 ctl 0xF8B40238 bmdma 0x0 irq 10 ata8: SATA max UDMA/133 cmd 0xF8B40280 ctl 0xF8B402B8 bmdma 0x0 irq 10 ata9: SATA max UDMA/133 cmd 0xF8B40300 ctl 0xF8B40338 bmdma 0x0 irq 10 ata10: SATA max UDMA/133 cmd 0xF8B40380 ctl 0xF8B403B8 bmdma 0x0 irq 10 ATA: abnormal status 0x7F on port 0xF8B4021C scsi6 : sata_sx4 ata8: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata8: dev 0 configured for UDMA/133 scsi7 : sata_sx4 ata9: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata9: dev 0 configured for UDMA/133 scsi8 : sata_sx4 ata10: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata10: dev 0 configured for UDMA/133 scsi9 : sata_sx4 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdg: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdg: drive cache: write back SCSI device sdg: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdg: drive cache: write back sdg: unknown partition table Attached scsi disk sdg at scsi7, channel 0, id 0, lun 0 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdh: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdh: drive cache: write back SCSI device sdh: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdh: drive cache: write back sdh: sdh1 Attached scsi disk sdh at scsi8, channel 0, id 0, lun 0 Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdi: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdi: drive cache: write back SCSI device sdi: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdi: drive cache: write back sdi: sdi1 Attached scsi disk sdi at scsi9, channel 0, id 0, lun 0 md: raid1 personality registered as nr 3 md: Autodetecting RAID arrays. md: autorun ... ------ lspci -v 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0258 Subsystem: ASRock Incorporation: Unknown device 0258 Flags: bus master, 66Mhz, medium devsel, latency 8 Memory at f8000000 (32-bit, prefetchable) [size=3D64M] Capabilities: [80] AGP version 3.5 Capabilities: [50] Power Management version 2 00:00.1 Host bridge: VIA Technologies, Inc. PT880 Host Bridge Subsystem: ASRock Incorporation: Unknown device 1258 Flags: bus master, medium devsel, latency 0 00:00.2 Host bridge: VIA Technologies, Inc. PT880 Host Bridge Subsystem: ASRock Incorporation: Unknown device 2258 Flags: bus master, medium devsel, latency 0 00:00.3 Host bridge: VIA Technologies, Inc. PT880 Host Bridge Subsystem: ASRock Incorporation: Unknown device 3258 Flags: bus master, medium devsel, latency 0 00:00.4 Host bridge: VIA Technologies, Inc. PT880 Host Bridge Subsystem: ASRock Incorporation: Unknown device 4258 Flags: bus master, medium devsel, latency 0 00:00.7 Host bridge: VIA Technologies, Inc. PT880 Host Bridge Subsystem: ASRock Incorporation: Unknown device 7258 Flags: bus master, medium devsel, latency 0 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 0= 0 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=3D00, secondary=3D01, subordinate=3D01, sec-latenc= y=3D0 Memory behind bridge: fc600000-fe6fffff Prefetchable memory behind bridge: f3f00000-f7efffff Capabilities: [70] Power Management version 2 00:0b.0 RAID bus controller: Promise Technology, Inc. PDC20621 [SATA150= SX4] 4 Channel IDE RAID Controller (rev 01) Subsystem: Promise Technology, Inc. PDC20621 [SATA150 SX4] 4 Ch= annel IDE RAID Controller Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 5 I/O ports at b000 [size=3D256] I/O ports at a800 [size=3D256] I/O ports at a400 [size=3D256] Memory at fe900000 (32-bit, non-prefetchable) [size=3D1M] Memory at febd8000 (32-bit, non-prefetchable) [size=3D32K] Expansion ROM at febc0000 [disabled] [size=3D64K] Capabilities: [60] Power Management version 1 00:0d.0 RAID bus controller: Promise Technology, Inc. PDC20621 [SATA150= SX4] 4 Channel IDE RAID Controller (rev 01) Subsystem: Promise Technology, Inc. PDC20621 [SATA150 SX4] 4 Ch= annel IDE RAID Controller Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 10 I/O ports at c000 [size=3D256] I/O ports at b800 [size=3D256] I/O ports at b400 [size=3D256] Memory at fea00000 (32-bit, non-prefetchable) [size=3D1M] Memory at febf0000 (32-bit, non-prefetchable) [size=3D32K] Expansion ROM at febe0000 [disabled] [size=3D64K] Capabilities: [60] Power Management version 1 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAI= D Controller (rev 80) Subsystem: ASRock Incorporation: Unknown device 3149 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at ec00 [size=3D8] I/O ports at e800 [size=3D4] I/O ports at e400 [size=3D8] I/O ports at e000 [size=3D4] I/O ports at dc00 [size=3D16] I/O ports at d800 [size=3D256] Capabilities: [c0] Power Management version 2 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-= if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation K7VT2 motherboard Flags: bus master, medium devsel, latency 32 I/O ports at fc00 [size=3D16] Capabilities: [c0] Power Management version 2 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] Subsystem: ASRock Incorporation: Unknown device 3227 Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (= rev 78) Subsystem: ASRock Incorporation: Unknown device 3065 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at d400 [size=3D256] Memory at febffc00 (32-bit, non-prefetchable) [size=3D256] Capabilities: [40] Power Management version 2 01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA]) Subsystem: PROLINK Microsystems Corp Pixelview RIVA TNT2 M64 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11 Memory at fd000000 (32-bit, non-prefetchable) [size=3D16M] Memory at f4000000 (32-bit, prefetchable) [size=3D32M] Expansion ROM at fe6f0000 [disabled] [size=3D64K] Capabilities: [60] Power Management version 1 Capabilities: [44] AGP version 2.0 cat /proc/interrupts CPU0 0: 217348 XT-PIC timer 1: 44 XT-PIC i8042 2: 0 XT-PIC cascade 4: 12 XT-PIC serial 5: 135 XT-PIC libata 8: 1 XT-PIC rtc 10: 158 XT-PIC libata, libata 11: 513 XT-PIC eth0 12: 101 XT-PIC i8042 14: 4612 XT-PIC ide0 15: 5431 XT-PIC ide1 NMI: 0 ERR: 0=20