From mboxrd@z Thu Jan 1 00:00:00 1970 From: "chia" Subject: Re: Date: Tue, 21 Aug 2007 23:18:51 -0500 Message-ID: <006101c7e473$8b924760$a378c00a@chia> References: <114377ad0708211840i638c4cb4v4187caab39868a12@mail.gmail.com> <46CBA353.7090108@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit Return-path: Received: from mail.ceat.okstate.edu ([139.78.73.125]:1127 "EHLO mail.ceat.okstate.edu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751256AbXHVE0Y (ORCPT ); Wed, 22 Aug 2007 00:26:24 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-ide@vger.kernel.org Dear Tejun, Is 10.3 beta stable? Do I still need to patch it? If I do, what version I should use? Can I apply a higher version patch to lower version of kernel? Thanks! -------------------------------------------------------------- Chia-Ming Liu, Ph.D. Mixed Signal VLSI Design Group Advanced Technology Research Center 235 Oklahoma State University Website: http://msvlsi.okstate.edu US Mail: 202 Engineering South Stillwater, OK 74078 Phone: 405-744-1662, 405-744-6241 Fax: 405-744-9198 ----- Original Message ----- From: "Tejun Heo" To: "chia-ming liu" Cc: ; Sent: Tuesday, August 21, 2007 9:45 PM Subject: Re: > chia-ming liu wrote: >> Dear Tejun, I am not very good at linux and just enough to get by. I >> have tried to use your patch by issuing the command 'patch -p1 < >> combined.patch' and I receive this >> >> msvlsi63:~/libata-tj-2.6.18.1-20061020 # patch -p1 < combined.patch >> can't find file to patch at input line 5 >> Perhaps you used the wrong -p or --strip option? >> The text leading up to this was: >> -------------------------- >> |Index: work/drivers/scsi/Kconfig >> |=================================================================== >> |--- work.orig/drivers/scsi/Kconfig 2006-10-20 10:48:25.000000000 >> +0900 >> |+++ work/drivers/scsi/Kconfig 2006-10-20 10:48:35.000000000 +0900 >> -------------------------- >> File to patch: >> >> Then, I opened combined.path and look for line 5 >> >> source "drivers/scsi/megaraid/Kconfig.megaraid" >> >> which point out the file I don't have. Am I missing something? I have >> Opensuse 10.2 and Norco DS-1220 disk array which has Silicon Image >> 3726 port multiplier. >> >> I don't have any driver install but Suse has recognized the PCI card >> with Silicon Image 3124. > > OpenSUSE 10.3 Beta contains PMP support. I think that will be easier. > > -- > tejun >