From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Brian & Chamaigne Scamman" Subject: RE: [PATCHSET #upstream-fixes] git tree available Date: Wed, 21 May 2008 15:42:23 -0400 Message-ID: <00b901c8bb7a$caaa1ed0$6917a8c0@parents> References: <12111273141039-git-send-email-htejun@gmail.com> <48305961.2050509@gmail.com> <006501c8ba19$c1f53340$6917a8c0@parents> <48323E4F.3050806@rtr.ca> <4832535B.1080505@gmail.com> <483256FF.1010200@gmail.com> <00a501c8bae2$7815f7e0$6917a8c0@parents> <4833AC14.5090207@gmail.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_00BA_01C8BB59.43987ED0" Return-path: Received: from elasmtp-spurfowl.atl.sa.earthlink.net ([209.86.89.66]:44312 "EHLO elasmtp-spurfowl.atl.sa.earthlink.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933475AbYEUTm2 (ORCPT ); Wed, 21 May 2008 15:42:28 -0400 In-Reply-To: <4833AC14.5090207@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: 'Tejun Heo' Cc: 'Mark Lord' , jeff@garzik.org, linux-ide@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_00BA_01C8BB59.43987ED0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Tejun Heo wrote: >Brian & Chamaigne Scamman wrote: >> One remaining issue is the "failed to IDENTIFY (I/O error, err mask=0xll)" >> message. If the PMP, bridges and drives are powered up before I >> insert the eSATA cable in to the controller, I don't receive the >> message. The message appears when only when I have the eSATA cable >> attached to the controller and then simultaneously power on the PMP >> and drives. In the attached dmesg log, the drive is eventually >> recognized; however there have been a couple of times when the drives >> aren't recognized. An eSATA cable remove/re-insert fixes the problem. > >Hmm... can you please post the failing log? Here's a dmesg log where one of the drives is never recognized, but the others eventually are... -Brian ------=_NextPart_000_00BA_01C8BB59.43987ED0 Content-Type: text/plain; name="pmp_drive_header_err.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="pmp_drive_header_err.txt" ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen=0A= ata3: irq_stat 0x00b40090, PHY RDY changed=0A= ata3: hard resetting link=0A= ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)=0A= ata3.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9=0A= ata3.00: hard resetting link=0A= ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.01: hard resetting link=0A= ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.02: hard resetting link=0A= ata3.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.03: hard resetting link=0A= ata3.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.04: hard resetting link=0A= ata3.04: SATA link down (SStatus 0 SControl 320)=0A= ata3.05: hard resetting link=0A= ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.00: failed to IDENTIFY (I/O error, err_mask=3D0x11)=0A= ata3.15: hard resetting link=0A= ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)=0A= ata3.00: hard resetting link=0A= ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.01: hard resetting link=0A= ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.02: hard resetting link=0A= ata3.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.03: hard resetting link=0A= ata3.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.05: hard resetting link=0A= ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.00: ATA-6: Super Talent Tech, Rev 2.11, max UDMA/133=0A= ata3.00: 127923200 sectors, multi 1: LBA =0A= ata3.00: applying bridge limits=0A= ata3.00: configured for UDMA/100=0A= ata3.01: ATA-6: Super Talent Tech, Rev 2.11, max UDMA/133=0A= ata3.01: 127923200 sectors, multi 1: LBA =0A= ata3.01: applying bridge limits=0A= ata3.01: configured for UDMA/100=0A= ata3.02: ATA-6: Super Talent Tech, Rev 2.11, max UDMA/133=0A= ata3.02: 127923200 sectors, multi 1: LBA =0A= ata3.02: applying bridge limits=0A= ata3.02: configured for UDMA/100=0A= ata3.03: failed to IDENTIFY (I/O error, err_mask=3D0x11)=0A= ata3.15: hard resetting link=0A= ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)=0A= ata3.00: hard resetting link=0A= ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.01: hard resetting link=0A= ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.02: hard resetting link=0A= ata3.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.03: hard resetting link=0A= ata3.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.04: hard resetting link=0A= ata3.04: SATA link down (SStatus 0 SControl 320)=0A= ata3.05: hard resetting link=0A= ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.00: configured for UDMA/100=0A= ata3.01: configured for UDMA/100=0A= ata3.02: configured for UDMA/100=0A= ata3.03: failed to IDENTIFY (I/O error, err_mask=3D0x11)=0A= ata3.15: hard resetting link=0A= ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)=0A= ata3.00: hard resetting link=0A= ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.01: hard resetting link=0A= ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.02: hard resetting link=0A= ata3.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.03: hard resetting link=0A= ata3.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.05: hard resetting link=0A= ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.00: configured for UDMA/100=0A= ata3.01: configured for UDMA/100=0A= ata3.02: configured for UDMA/100=0A= ata3.03: failed to IDENTIFY (I/O error, err_mask=3D0x11)=0A= ata3.03: failed to recover link after 3 tries, disabling=0A= ata3: failed to recover PMP, retrying in 5 secs=0A= ata3.15: hard resetting link=0A= ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)=0A= ata3.00: hard resetting link=0A= ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.01: hard resetting link=0A= ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.02: hard resetting link=0A= ata3.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.04: hard resetting link=0A= ata3.04: SATA link down (SStatus 0 SControl 320)=0A= ata3.05: hard resetting link=0A= ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)=0A= ata3.00: configured for UDMA/100=0A= ata3.01: configured for UDMA/100=0A= ata3.02: configured for UDMA/100=0A= ata3: EH complete=0A= scsi 2:0:0:0: Direct-Access ATA Super Talent Tec Rev PQ: 0 = ANSI: 5=0A= sd 2:0:0:0: [sda] 127923200 512-byte hardware sectors (65497 MB)=0A= sd 2:0:0:0: [sda] Write Protect is off=0A= sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00=0A= sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sd 2:0:0:0: [sda] 127923200 512-byte hardware sectors (65497 MB)=0A= sd 2:0:0:0: [sda] Write Protect is off=0A= sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00=0A= sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sda: sda1=0A= sd 2:0:0:0: [sda] Attached SCSI disk=0A= sd 2:0:0:0: Attached scsi generic sg0 type 0=0A= scsi 2:1:0:0: Direct-Access ATA Super Talent Tec Rev PQ: 0 = ANSI: 5=0A= sd 2:1:0:0: [sdb] 127923200 512-byte hardware sectors (65497 MB)=0A= sd 2:1:0:0: [sdb] Write Protect is off=0A= sd 2:1:0:0: [sdb] Mode Sense: 00 3a 00 00=0A= sd 2:1:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sd 2:1:0:0: [sdb] 127923200 512-byte hardware sectors (65497 MB)=0A= sd 2:1:0:0: [sdb] Write Protect is off=0A= sd 2:1:0:0: [sdb] Mode Sense: 00 3a 00 00=0A= sd 2:1:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdb: sdb1=0A= sd 2:1:0:0: [sdb] Attached SCSI disk=0A= sd 2:1:0:0: Attached scsi generic sg1 type 0=0A= scsi 2:2:0:0: Direct-Access ATA Super Talent Tec Rev PQ: 0 = ANSI: 5=0A= sd 2:2:0:0: [sdc] 127923200 512-byte hardware sectors (65497 MB)=0A= sd 2:2:0:0: [sdc] Write Protect is off=0A= sd 2:2:0:0: [sdc] Mode Sense: 00 3a 00 00=0A= sd 2:2:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sd 2:2:0:0: [sdc] 127923200 512-byte hardware sectors (65497 MB)=0A= sd 2:2:0:0: [sdc] Write Protect is off=0A= sd 2:2:0:0: [sdc] Mode Sense: 00 3a 00 00=0A= sd 2:2:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdc: sdc1=0A= sd 2:2:0:0: [sdc] Attached SCSI disk=0A= sd 2:2:0:0: Attached scsi generic sg2 type 0=0A= ------=_NextPart_000_00BA_01C8BB59.43987ED0--