From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ray Overdijk" Subject: sata_via: eSATA drive not recognised on VT6421 card Date: Tue, 16 Jan 2007 16:35:52 +1100 Message-ID: <011c01c73930$2fdbdce0$181012cb@samson> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from bdr3.netro.com.au ([203.194.18.225]:57904 "EHLO picard.netro.com.au" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932333AbXAPFx5 (ORCPT ); Tue, 16 Jan 2007 00:53:57 -0500 Received: from localhost (unknown [127.0.0.1]) by picard.netro.com.au (Postfix) with ESMTP id 2E5BF2F5C96 for ; Tue, 16 Jan 2007 05:35:43 +0000 (UTC) Received: from picard.netro.com.au ([127.0.0.1]) by localhost (picard.netro.com.au [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 1o4HV3J3XIvQ for ; Tue, 16 Jan 2007 16:35:40 +1100 (EST) Received: from samson (samson.netro.com.au [203.18.16.24]) by picard.netro.com.au (Postfix) with ESMTP id 9A3132F5C95 for ; Tue, 16 Jan 2007 16:35:40 +1100 (EST) Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Any ideas on what would cause these errors? http://www.kernel.org/hg/linux-2.6/file/68ac6248e71b/drivers/ata/sata_via.c dmesg SCSI subsystem initialized libata version 2.00 loaded. sata_via 0000:01:00.0: version 2.0 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:01:00.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xDC00 ctl 0xDC0A bmdma 0xD400 irq 21 ata2: SATA max UDMA/133 cmd 0xD880 ctl 0xD88A bmdma 0xD408 irq 21 scsi0 : sata_via ata1: SATA link down (SStatus 0 SControl 310) ATA: abnormal status 0x7F on port 0xDC07 scsi1 : sata_via ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ATA: abnormal status 0xD0 on port 0xD887 ATA: abnormal status 0xD0 on port 0xD887 ATA: abnormal status 0xD0 on port 0xD887 ATA: abnormal status 0xD0 on port 0xD887 ATA: abnormal status 0xD0 on port 0xD887 ATA: abnormal status 0xD0 on port 0xD887 ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2.00: revalidation failed (errno=-5) ata2.00: limiting speed to PIO0 ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2.00: revalidation failed (errno=-5) ata2.00: disabled uname -r 2.6.18-1.2869.fc6xen Thanks, Ray (please cc me directly on reply)