From: "Paul Rolland" <rol@as2917.net>
To: 'Linus Torvalds' <torvalds@linux-foundation.org>
Cc: 'Tejun Heo' <htejun@gmail.com>, 'Jeff Garzik' <jeff@garzik.org>,
'Andrew Morton' <akpm@linux-foundation.org>,
linux-ide@vger.kernel.org, 'LKML' <linux-kernel@vger.kernel.org>,
"'Eric D. Mudama'" <edmudama@gmail.com>
Subject: RE: [git patches] libata fixes
Date: Sun, 11 Mar 2007 19:34:58 +0100 [thread overview]
Message-ID: <017f01c7640b$fbcafab0$2101a8c0@donald> (raw)
In-Reply-To: <Pine.LNX.4.64.0703110931080.9690@woody.linux-foundation.org>
[-- Attachment #1: Type: text/plain, Size: 1818 bytes --]
Hello,
> do I understand correctly that the *only* difference between
> the working
> setup is that you applied (by hand) the libata patch that
> Jeff sent out?
>
> So plain 2.6.21-rc2 works fine, but with the patch applied,
> you get no
> interrupts on the DVD drive?
Nope... I tried several patches from Tejun, and also some that Jeff posted
to linux-ide, but no luck. The only way to have this DVD-RW working is to
use irqpoll on the command line...
Sorry to have been unclear....
To complete, here are some more output from the machine :
- a dmesg without irqpoll,
- a dmesg with irqpoll,
- a copy of /proc/interrupts
6 [19:33] rol@riri:~> cat /proc/interrupts
CPU0 CPU1
0: 357022 0 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
4: 14 0 IO-APIC-edge serial
6: 5 0 IO-APIC-edge floppy
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 129 0 IO-APIC-edge i8042
14: 7639 0 IO-APIC-edge libata
15: 0 0 IO-APIC-edge libata
16: 0 0 IO-APIC-fasteoi libata
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 204 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel
20: 107 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
21: 3 0 IO-APIC-fasteoi ohci1394
504: 8243 0 PCI-MSI-edge libata
505: 1 0 PCI-MSI-edge eth1
506: 386 0 PCI-MSI-edge eth0
NMI: 771 531
LOC: 569318 578684
ERR: 0
Regards,
Paul
[-- Attachment #2: dmesg-2.6.21-rc2 --]
[-- Type: application/octet-stream, Size: 31538 bytes --]
Linux version 2.6.21-rc2 (root@riri.as2917.net) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #4 SMP PREEMPT Sun Mar 4 19:52:39 CET 2007
Command line: root=/dev/sde1 ro ata2=noprobe console=ttyS0,9600 console=tty0 vga=extended
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000c7f80000 (usable)
BIOS-e820: 00000000c7f80000 - 00000000c7f8e000 (ACPI data)
BIOS-e820: 00000000c7f8e000 - 00000000c7fe0000 (ACPI NVS)
BIOS-e820: 00000000c7fe0000 - 00000000c8000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 819072) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)
ACPI: XSDT C7F80100, 005C (r1 A_M_I_ OEMXSDT 12000608 MSFT 97)
ACPI: FACP C7F80290, 00F4 (r3 A_M_I_ OEMFACP 12000608 MSFT 97)
ACPI: DSDT C7F80410, 8FC4 (r1 A0543 A0543000 0 INTL 20060113)
ACPI: FACS C7F8E000, 0040
ACPI: APIC C7F80390, 0080 (r1 A_M_I_ OEMAPIC 12000608 MSFT 97)
ACPI: OEMB C7F8E040, 0066 (r1 A_M_I_ AMI_OEM 12000608 MSFT 97)
ACPI: HPET C7F893E0, 0038 (r1 A_M_I_ OEMHPET 12000608 MSFT 97)
ACPI: MCFG C7F89420, 003C (r1 A_M_I_ OEMMCFG 12000608 MSFT 97)
ACPI: SSDT C7F8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: SSDT C7F8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 819072) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 819072
On node 0 totalpages: 818975
DMA zone: 56 pages used for memmap
DMA zone: 1986 pages reserved
DMA zone: 1957 pages, LIFO batch:0
DMA32 zone: 11142 pages used for memmap
DMA32 zone: 803834 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at cc000000 (gap: c8000000:37b00000)
PERCPU: Allocating 34368 bytes of per cpu data
Built 1 zonelists. Total pages: 805791
Kernel command line: root=/dev/sde1 ro ata2=noprobe console=ttyS0,9600 console=tty0 vga=extended
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2400.083 MHz processor.
Console: colour VGA+ 80x50
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
Memory: 3216500k/3276288k available (4563k kernel code, 59172k reserved, 2317k data, 296k init)
Calibrating delay using timer specific routine.. 4802.77 BogoMIPS (lpj=2401386)
Security Framework v1.0.0 initialized
Capability LSM initialized
Failure registering Root Plug module with the kernel
Failure registering Root Plug module with primary security module.
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
Freeing SMP alternatives: 40k freed
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 10130463
Detected 10.130 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.35 BogoMIPS (lpj=2400179)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=21
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Boot video device is 0000:06:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 2 of device 0000:02:00.0
PCI: Cannot allocate resource region 3 of device 0000:02:00.0
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
pnp: 00:07: ioport range 0x290-0x297 has been reserved
pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0f: iomem range 0xc0000-0xdffff has been reserved
pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0f: iomem range 0x100000-0xc7ffffff could not be reserved
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff5ef800-ff5effff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: ff900000-ff9fffff
PREFETCH window: cff00000-efefffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: cfe00000-cfefffff
PCI: Bridge: 0000:00:1c.3
IO window: b000-bfff
MEM window: ff800000-ff8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: a000-afff
MEM window: ff700000-ff7fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: 9000-9fff
MEM window: ff600000-ff6fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 8000-8fff
MEM window: ff500000-ff5fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000fefb23]
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/W].
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 78, should be 6F [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node ffff81000424cb30), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff81000424cb50), AE_ALREADY_EXISTS
ACPI: Marking method _PDC as Serialized
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node ffff81000424ca10), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff81000424ca30), AE_ALREADY_EXISTS
ACPI: Marking method _PDC as Serialized
ACPI: Processor [CPU2] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
intel_rng: FWH not detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.13 addr 0xff8fc000 irq 19 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:18:f3:e0:5d:d4
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 0000:03:00.0: v1.13 addr 0xff7fc000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth1: addr 00:18:f3:e0:36:fd
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ahci 0000:00:1f.2: version 2.1
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xffffc2000008a900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
ata2: SATA max UDMA/133 cmd 0xffffc2000008a980 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
ata3: SATA max UDMA/133 cmd 0xffffc2000008aa00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
ata4: SATA max UDMA/133 cmd 0xffffc2000008aa80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
ata2.00: 640 sectors, multi 1: LBA
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi3 : ahci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3500641AS, 3.AAB, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
SCSI device sdb: 640 512-byte hdwr sectors (0 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 640 512-byte hdwr sectors (0 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 2:0:0:0: Attached scsi disk sdc
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 sdd3
sd 3:0:0:0: Attached scsi disk sdd
sd 3:0:0:0: Attached scsi generic sg3 type 0
PCI: Device 0000:02:00.0 not available because of resource collisions
ahci: probe of 0000:02:00.0 failed with error -22
ata_piix 0000:00:1f.1: version 2.10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
scsi4 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.00: ATA-7: Maxtor 6L200P0, BAH41E00, max UDMA/133
ata5.00: 398297088 sectors, multi 16: LBA48
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.01: ATAPI, max UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.00: configured for UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.01: configured for UDMA/33
scsi5 : ata_piix
ATA: abnormal status 0x7F on port 0x0000000000010177
scsi 4:0:0:0: Direct-Access ATA Maxtor 6L200P0 BAH4 PQ: 0 ANSI: 5
SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3 sde4 < sde5 sde6 >
sd 4:0:0:0: Attached scsi disk sde
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 4:0:1:0: CD-ROM ASUS CRW-5232A3 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
sr 4:0:1:0: Attached scsi generic sg5 type 5
PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.1 to 64
ata7: PATA max UDMA/100 cmd 0x0000000000019c00 ctl 0x0000000000019882 bmdma 0x0000000000019400 irq 16
ata8: PATA max UDMA/100 cmd 0x0000000000019800 ctl 0x0000000000019482 bmdma 0x0000000000019408 irq 16
scsi6 : pata_jmicron
ata7.00: ATAPI, max UDMA/66
ata7.00: qc timeout (cmd 0xef)
ata7.00: failed to set xfermode (err_mask=0x4)
ata7: failed to recover some devices, retrying in 5 secs
ata7.00: qc timeout (cmd 0xef)
ata7.00: failed to set xfermode (err_mask=0x4)
ata7.00: limiting speed to UDMA/66:PIO3
ata7: failed to recover some devices, retrying in 5 secs
ata7.00: qc timeout (cmd 0xef)
ata7.00: failed to set xfermode (err_mask=0x4)
ata7.00: disabled
scsi7 : pata_jmicron
ATA: abnormal status 0x7F on port 0x0000000000019807
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffafbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-7: new high speed USB device using ehci_hcd and address 3
usb 1-7: configuration #1 chosen from 1 choice
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 1-7.3: new high speed USB device using ehci_hcd and address 4
usb 1-7.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: PC Speaker as /class/input/input3
input: ImExPS/2 Logitech MX Mouse as /class/input/input4
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O ProcFS OSM v1.316
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
Advanced Linux Sound Architecture Driver Version 1.0.14rc2 (Wed Feb 14 07:42:13 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xffafc000 irq 19
netem: version 1.2
u32 classifier
Performance counters on
OLD policer on
Netfilter messages via NETLINK v0.30.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6: add_dev failed for eql
tunl0: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Time: tsc clocksource has been installed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 296k freed
EXT3 FS on sde1, internal journal
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096436k swap on /dev/sde5. Priority:-1 extents:1 across:2096436k
Adding 4192956k swap on /dev/sda3. Priority:-2 extents:1 across:4192956k
ata3.00: exception Emask 0x2 SAct 0xffff80 SErr 0x0 action 0x2 frozen
ata3.00: (spurious completion during NCQ issue=0x0 SAct=0xffff80 FIS=004040a1:00000040)
ata3.00: cmd 60/04:38:83:00:00/00:00:00:00:00/40 tag 7 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:40:87:00:00/00:00:00:00:00/40 tag 8 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:48:8b:00:00/00:00:00:00:00/40 tag 9 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:50:8f:00:00/00:00:00:00:00/40 tag 10 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:58:93:00:00/00:00:00:00:00/40 tag 11 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:60:97:00:00/00:00:00:00:00/40 tag 12 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:68:9b:00:00/00:00:00:00:00/40 tag 13 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:70:9f:00:00/00:00:00:00:00/40 tag 14 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:78:a3:00:00/00:00:00:00:00/40 tag 15 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:80:a7:00:00/00:00:00:00:00/40 tag 16 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:88:ab:00:00/00:00:00:00:00/40 tag 17 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:90:af:00:00/00:00:00:00:00/40 tag 18 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:98:b3:00:00/00:00:00:00:00/40 tag 19 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:a0:b7:00:00/00:00:00:00:00/40 tag 20 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:a8:bb:00:00/00:00:00:00:00/40 tag 21 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:b0:bf:00:00/00:00:00:00:00/40 tag 22 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3.00: cmd 60/04:b8:c3:00:00/00:00:00:00:00/40 tag 23 cdb 0x0 data 2048 in
res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
eth0: no IPv6 routers present
ttyS1: LSR safety check engaged!
[-- Attachment #3: dmesg-2.6.21-rc2-irqpoll-dvd --]
[-- Type: application/octet-stream, Size: 30066 bytes --]
Linux version 2.6.21-rc2 (root@riri.as2917.net) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #4 SMP PREEMPT Sun Mar 4 19:52:39 CET 2007
Command line: root=/dev/sde1 ro ata2=noprobe console=ttyS0,9600 console=tty0 vga=extended irqpoll
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000c7f80000 (usable)
BIOS-e820: 00000000c7f80000 - 00000000c7f8e000 (ACPI data)
BIOS-e820: 00000000c7f8e000 - 00000000c7fe0000 (ACPI NVS)
BIOS-e820: 00000000c7fe0000 - 00000000c8000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 819072) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)
ACPI: XSDT C7F80100, 005C (r1 A_M_I_ OEMXSDT 12000608 MSFT 97)
ACPI: FACP C7F80290, 00F4 (r3 A_M_I_ OEMFACP 12000608 MSFT 97)
ACPI: DSDT C7F80410, 8FC4 (r1 A0543 A0543000 0 INTL 20060113)
ACPI: FACS C7F8E000, 0040
ACPI: APIC C7F80390, 0080 (r1 A_M_I_ OEMAPIC 12000608 MSFT 97)
ACPI: OEMB C7F8E040, 0066 (r1 A_M_I_ AMI_OEM 12000608 MSFT 97)
ACPI: HPET C7F893E0, 0038 (r1 A_M_I_ OEMHPET 12000608 MSFT 97)
ACPI: MCFG C7F89420, 003C (r1 A_M_I_ OEMMCFG 12000608 MSFT 97)
ACPI: SSDT C7F8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: SSDT C7F8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 819072) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 819072
On node 0 totalpages: 818975
DMA zone: 56 pages used for memmap
DMA zone: 1986 pages reserved
DMA zone: 1957 pages, LIFO batch:0
DMA32 zone: 11142 pages used for memmap
DMA32 zone: 803834 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at cc000000 (gap: c8000000:37b00000)
PERCPU: Allocating 34368 bytes of per cpu data
Built 1 zonelists. Total pages: 805791
Kernel command line: root=/dev/sde1 ro ata2=noprobe console=ttyS0,9600 console=tty0 vga=extended irqpoll
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2400.083 MHz processor.
Console: colour VGA+ 80x50
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
Memory: 3216500k/3276288k available (4563k kernel code, 59172k reserved, 2317k data, 296k init)
Calibrating delay using timer specific routine.. 4817.98 BogoMIPS (lpj=2408991)
Security Framework v1.0.0 initialized
Capability LSM initialized
Failure registering Root Plug module with the kernel
Failure registering Root Plug module with primary security module.
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
Freeing SMP alternatives: 40k freed
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 16667239
Detected 16.667 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.38 BogoMIPS (lpj=2400190)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=24
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Boot video device is 0000:06:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 2 of device 0000:02:00.0
PCI: Cannot allocate resource region 3 of device 0000:02:00.0
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
pnp: 00:07: ioport range 0x290-0x297 has been reserved
pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0xc7ffffff could not be reserved
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff5ef800-ff5effff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: ff900000-ff9fffff
PREFETCH window: cff00000-efefffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: cfe00000-cfefffff
PCI: Bridge: 0000:00:1c.3
IO window: b000-bfff
MEM window: ff800000-ff8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: a000-afff
MEM window: ff700000-ff7fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: 9000-9fff
MEM window: ff600000-ff6fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 8000-8fff
MEM window: ff500000-ff5fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000fefb23]
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/W].
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 88, should be 7F [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node ffff81000424cb30), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff81000424cb50), AE_ALREADY_EXISTS
ACPI: Marking method _PDC as Serialized
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node ffff81000424ca10), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff81000424ca30), AE_ALREADY_EXISTS
ACPI: Marking method _PDC as Serialized
ACPI: Processor [CPU2] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
intel_rng: FWH not detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.13 addr 0xff8fc000 irq 19 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:18:f3:e0:5d:d4
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 0000:03:00.0: v1.13 addr 0xff7fc000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth1: addr 00:18:f3:e0:36:fd
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ahci 0000:00:1f.2: version 2.1
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xffffc2000008a900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
ata2: SATA max UDMA/133 cmd 0xffffc2000008a980 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
ata3: SATA max UDMA/133 cmd 0xffffc2000008aa00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
ata4: SATA max UDMA/133 cmd 0xffffc2000008aa80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 504
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
ata2.00: 640 sectors, multi 1: LBA
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi3 : ahci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3500641AS, 3.AAB, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
SCSI device sdb: 640 512-byte hdwr sectors (0 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 640 512-byte hdwr sectors (0 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 2:0:0:0: Attached scsi disk sdc
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 sdd3
sd 3:0:0:0: Attached scsi disk sdd
sd 3:0:0:0: Attached scsi generic sg3 type 0
PCI: Device 0000:02:00.0 not available because of resource collisions
ahci: probe of 0000:02:00.0 failed with error -22
ata_piix 0000:00:1f.1: version 2.10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
scsi4 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.00: ATA-7: Maxtor 6L200P0, BAH41E00, max UDMA/133
ata5.00: 398297088 sectors, multi 16: LBA48
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.01: ATAPI, max UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.00: configured for UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), AE_AML_OPERAND_VALUE
ata5.01: configured for UDMA/33
scsi5 : ata_piix
ATA: abnormal status 0x7F on port 0x0000000000010177
scsi 4:0:0:0: Direct-Access ATA Maxtor 6L200P0 BAH4 PQ: 0 ANSI: 5
SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3 sde4 < sde5 sde6 >
sd 4:0:0:0: Attached scsi disk sde
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 4:0:1:0: CD-ROM ASUS CRW-5232A3 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
sr 4:0:1:0: Attached scsi generic sg5 type 5
PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.1 to 64
ata7: PATA max UDMA/100 cmd 0x0000000000019c00 ctl 0x0000000000019882 bmdma 0x0000000000019400 irq 16
ata8: PATA max UDMA/100 cmd 0x0000000000019800 ctl 0x0000000000019482 bmdma 0x0000000000019408 irq 16
scsi6 : pata_jmicron
ata7.00: ATAPI, max UDMA/66
ata7.00: configured for UDMA/66
scsi7 : pata_jmicron
ATA: abnormal status 0x7F on port 0x0000000000019807
scsi 6:0:0:0: CD-ROM ASUS DRW-1608P 1.40 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 6:0:0:0: Attached scsi CD-ROM sr1
sr 6:0:0:0: Attached scsi generic sg6 type 5
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffafbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-7: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-7: configuration #1 chosen from 1 choice
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 1-7.3: new high speed USB device using ehci_hcd and address 3
usb 1-7.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: PC Speaker as /class/input/input3
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O ProcFS OSM v1.316
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
Advanced Linux Sound Architecture Driver Version 1.0.14rc2 (Wed Feb 14 07:42:13 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xffafc000 irq 19
netem: version 1.2
u32 classifier
Performance counters on
OLD policer on
Netfilter messages via NETLINK v0.30.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6: add_dev failed for eql
tunl0: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Time: tsc clocksource has been installed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 296k freed
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K
ADDRCONF(NETDEV_UP): eth0: link is not ready
ata1.00: exception Emask 0x2 SAct 0x7e000007 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completion during NCQ issue=0x0 SAct=0x7e000007 FIS=004040a1:01000000)
ata1.00: cmd 60/08:00:88:e1:44/00:00:0f:00:00/40 tag 0 cdb 0x0 data 4096 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/01:08:3b:eb:ff/00:00:09:00:00/40 tag 1 cdb 0x0 data 512 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/57:10:3c:eb:ff/00:00:09:00:00/40 tag 2 cdb 0x0 data 44544 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/01:c8:35:eb:ff/00:00:09:00:00/40 tag 25 cdb 0x0 data 512 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/01:d0:36:eb:ff/00:00:09:00:00/40 tag 26 cdb 0x0 data 512 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/01:d8:37:eb:ff/00:00:09:00:00/40 tag 27 cdb 0x0 data 512 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/01:e0:38:eb:ff/00:00:09:00:00/40 tag 28 cdb 0x0 data 512 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/01:e8:39:eb:ff/00:00:09:00:00/40 tag 29 cdb 0x0 data 512 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 60/01:f0:3a:eb:ff/00:00:09:00:00/40 tag 30 cdb 0x0 data 512 in
res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
EXT3 FS on sde1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096436k swap on /dev/sde5. Priority:-1 extents:1 across:2096436k
Adding 4192956k swap on /dev/sda3. Priority:-2 extents:1 across:4192956k
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
next prev parent reply other threads:[~2007-03-11 18:35 UTC|newest]
Thread overview: 263+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-02 2:08 [git patches] libata fixes Jeff Garzik
2007-03-03 18:39 ` Paul Rolland
2007-03-05 5:13 ` Tejun Heo
2007-03-05 9:54 ` Paul Rolland
2007-03-05 15:45 ` Tejun Heo
2007-03-06 7:37 ` Paul Rolland
2007-03-09 12:49 ` Tejun Heo
2007-03-11 11:35 ` Paul Rolland
2007-03-11 16:43 ` Linus Torvalds
2007-03-11 18:34 ` Paul Rolland [this message]
2007-03-11 19:20 ` Paul Rolland
2007-03-11 20:04 ` Linus Torvalds
2007-03-11 22:25 ` Paul Rolland
2007-03-12 0:59 ` Linus Torvalds
2007-03-12 6:28 ` Tejun Heo
2007-03-12 6:30 ` Tejun Heo
2007-03-12 8:00 ` Paul Rolland
2007-03-12 8:04 ` Tejun Heo
2007-03-12 9:58 ` Paul Rolland
2007-03-17 17:59 ` Paul Rolland
2007-03-17 18:44 ` Alan Cox
2007-03-17 18:47 ` Paul Rolland
2007-03-17 18:56 ` Alan Cox
2007-03-17 19:29 ` Paul Rolland
2007-03-17 19:56 ` Alan Cox
2007-03-17 19:42 ` Tejun Heo
2007-03-17 19:47 ` Paul Rolland
2007-03-17 20:02 ` Tejun Heo
2007-03-17 20:08 ` Paul Rolland
2007-03-18 4:52 ` Tejun Heo
2007-03-18 10:09 ` Paul Rolland
2007-03-18 10:28 ` Tejun Heo
2007-03-18 10:33 ` Paul Rolland
2007-03-18 10:39 ` Tejun Heo
2007-03-18 10:50 ` Paul Rolland
2007-03-18 11:06 ` Paul Rolland
2007-03-19 4:37 ` Tejun Heo
2007-03-19 7:48 ` Paul Rolland
2007-03-19 7:55 ` Tejun Heo
2007-03-19 11:05 ` Alan Cox
2007-03-12 7:56 ` Paul Rolland
2007-03-17 17:56 ` Paul Rolland
-- strict thread matches above, loose matches on Subject: below --
2013-04-08 20:30 Jeff Garzik
2013-01-21 19:48 Jeff Garzik
2013-01-22 18:04 ` Linus Torvalds
2012-11-17 4:39 Jeff Garzik
2012-08-25 14:26 Jeff Garzik
2012-05-03 18:27 Jeff Garzik
2012-05-03 18:31 ` Sergei Shtylyov
2012-05-03 18:38 ` Jeff Garzik
2012-05-04 11:04 ` Sergei Shtylyov
2012-05-04 21:04 ` Calvin Walton
2012-04-18 18:46 Jeff Garzik
2012-04-18 19:34 ` Josh Boyer
2012-04-18 19:45 ` Jeff Garzik
2011-11-24 1:23 Jeff Garzik
2011-11-24 1:32 ` Linus Torvalds
2011-08-19 4:45 Jeff Garzik
2011-06-23 20:52 Jeff Garzik
2010-12-24 18:37 Jeff Garzik
2010-11-12 22:30 Jeff Garzik
2010-09-10 2:41 Jeff Garzik
2010-08-25 23:32 Jeff Garzik
2010-07-01 20:20 Jeff Garzik
2010-06-10 20:09 Jeff Garzik
2010-06-07 20:07 Jeff Garzik
2010-05-05 18:54 Jeff Garzik
2010-04-23 2:17 Jeff Garzik
2010-04-06 15:22 Jeff Garzik
2010-03-23 13:42 Jeff Garzik
2010-03-23 18:06 ` Pavel Roskin
2010-03-25 16:21 ` Tejun Heo
2010-03-26 20:17 ` Pavel Roskin
2010-03-26 21:59 ` Pavel Roskin
2010-03-17 20:04 Jeff Garzik
2010-03-17 22:22 ` Marc Dionne
2010-02-05 1:29 Jeff Garzik
2010-01-12 19:36 Jeff Garzik
2009-12-20 20:45 Jeff Garzik
2009-10-16 10:26 Jeff Garzik
2009-08-12 10:35 Jeff Garzik
2009-07-29 2:02 Jeff Garzik
2009-07-15 3:09 Jeff Garzik
2009-06-05 18:46 Jeff Garzik
2009-06-05 20:16 ` Alan Cox
2009-06-05 21:15 ` Jeff Garzik
2009-05-11 18:37 Jeff Garzik
2009-04-17 23:07 Jeff Garzik
2009-04-16 19:39 Jeff Garzik
2009-04-16 20:28 ` Mark Lord
2009-04-13 9:27 Jeff Garzik
2009-03-13 19:03 Jeff Garzik
2009-03-05 12:34 Jeff Garzik
2009-02-25 20:36 Jeff Garzik
2009-02-17 21:25 Jeff Garzik
2009-01-27 7:30 Jeff Garzik
2009-01-27 15:50 ` Linus Torvalds
2009-01-27 18:37 ` Jeff Garzik
2009-01-27 19:02 ` Linus Torvalds
2009-01-27 23:04 ` Tejun Heo
2009-01-16 15:27 Jeff Garzik
2009-01-16 17:31 ` Andrew Morton
2009-01-16 18:21 ` Alan Cox
2009-01-16 18:45 ` Sergei Shtylyov
2009-01-16 18:49 ` Grant Grundler
2009-01-16 19:21 ` David Daney
2009-01-16 23:13 ` David Daney
2009-01-13 15:39 Jeff Garzik
2008-12-16 11:05 Jeff Garzik
2008-12-09 5:51 Jeff Garzik
[not found] ` <200812091825.mB9IPRwq027199@lxorguk.ukuu.org.uk>
2008-12-09 18:28 ` Alan Cox
2008-12-01 19:06 Jeff Garzik
2008-11-11 8:06 Jeff Garzik
2008-11-04 6:20 Jeff Garzik
2008-10-31 5:49 Jeff Garzik
2008-10-31 13:20 ` Greg Freemyer
2008-11-02 13:21 ` Jeff Garzik
2008-11-02 20:18 ` Greg Freemyer
2008-11-02 23:42 ` Mark Lord
2008-10-23 0:48 Jeff Garzik
2008-09-13 20:59 Jeff Garzik
2008-06-19 0:59 Jeff Garzik
2008-06-13 7:03 Jeff Garzik
2008-06-04 10:45 Jeff Garzik
2008-05-30 22:13 Jeff Garzik
2008-04-29 22:09 Jeff Garzik
2008-04-25 5:36 Jeff Garzik
2008-04-12 5:28 Jeff Garzik
2008-04-09 7:04 Jeff Garzik
2008-04-04 8:23 Jeff Garzik
2008-03-29 20:09 Jeff Garzik
2008-03-25 2:50 Jeff Garzik
2008-03-17 12:35 Jeff Garzik
2008-03-17 18:29 ` Ingo Molnar
2008-03-17 18:31 ` Ingo Molnar
2008-03-11 1:23 Jeff Garzik
2008-03-05 12:57 Jeff Garzik
2008-02-24 5:35 Jeff Garzik
2008-02-24 17:21 ` Bartlomiej Zolnierkiewicz
2008-02-24 17:07 ` Alan Cox
2008-02-24 17:40 ` Bartlomiej Zolnierkiewicz
2008-02-20 17:25 Jeff Garzik
2008-02-15 21:20 Jeff Garzik
2008-02-11 19:51 Jeff Garzik
2008-01-15 21:42 Jeff Garzik
2008-01-15 3:44 Jeff Garzik
2008-01-10 22:43 Jeff Garzik
2007-12-18 2:00 Jeff Garzik
2007-12-07 20:34 Jeff Garzik
2007-12-07 21:27 ` Frans Pop
2007-12-04 20:10 Jeff Garzik
2007-12-01 23:35 Jeff Garzik
2007-11-26 16:16 Jeff Garzik
2007-11-19 4:36 Tejun Heo
2007-11-21 2:26 ` Jeff Garzik
2007-11-10 9:24 Jeff Garzik
2007-11-06 0:03 Jeff Garzik
2007-11-03 18:13 Jeff Garzik
2007-10-31 9:38 Mikael Pettersson
2007-10-31 9:40 ` Jeff Garzik
2007-10-30 18:45 Jeff Garzik
2007-10-30 18:54 ` Linus Torvalds
2007-10-30 19:12 ` Jeff Garzik
2007-10-30 19:31 ` Linus Torvalds
2007-10-30 19:46 ` Jan Engelhardt
2007-10-30 22:45 ` Junio C Hamano
2007-10-20 3:08 Jeff Garzik
2007-10-18 1:08 Jeff Garzik
2007-10-03 18:51 Jeff Garzik
2007-09-26 4:43 Jeff Garzik
2007-09-20 20:15 Jeff Garzik
2007-09-11 2:15 Jeff Garzik
2007-08-31 9:02 Jeff Garzik
2007-08-23 10:08 Jeff Garzik
2007-08-15 9:44 Jeff Garzik
2007-08-08 1:07 Jeff Garzik
2007-08-01 16:19 Jeff Garzik
2007-07-24 20:56 Jeff Garzik
2007-07-03 15:52 Jeff Garzik
2007-07-03 16:07 ` Alan Cox
2007-07-03 16:21 ` Linus Torvalds
2007-07-03 16:34 ` Alan Cox
2007-07-03 16:42 ` Linus Torvalds
2007-07-03 17:21 ` Alan Cox
2007-07-04 14:11 ` David Woodhouse
2007-07-02 14:52 Jeff Garzik
2007-06-28 14:29 Mikael Pettersson
2007-06-27 7:35 Jeff Garzik
2007-06-27 7:38 ` Andrew Morton
2007-06-27 7:47 ` Jeff Garzik
2007-06-27 15:48 ` Linus Torvalds
2007-06-21 0:06 Jeff Garzik
2007-06-10 3:31 Jeff Garzik
2007-05-26 0:06 Mikael Pettersson
2007-05-26 0:15 ` Jeff Garzik
2007-05-25 22:03 Jeff Garzik
2007-05-31 8:31 ` Albert Lee
2007-05-25 0:41 Jeff Garzik
2007-05-18 1:38 Jeff Garzik
2007-05-16 5:36 Jeff Garzik
2007-04-04 6:39 Jeff Garzik
2007-03-28 7:32 Jeff Garzik
2007-03-28 7:33 ` Jeff Garzik
2007-03-28 20:53 ` Linus Torvalds
2007-03-28 21:15 ` Andrew Morton
2007-03-28 21:33 ` Chuck Ebbert
2007-03-19 18:37 Jeff Garzik
2007-03-06 9:17 Jeff Garzik
2007-03-03 1:46 Jeff Garzik
2007-03-03 18:54 ` Paul Rolland
2007-03-03 19:33 ` Paul Rolland
2007-03-05 5:19 ` Tejun Heo
2007-03-05 9:52 ` Paul Rolland
2007-02-02 16:58 Jeff Garzik
2007-02-02 17:13 ` Linus Torvalds
2007-02-02 17:19 ` Jeff Garzik
2007-02-02 19:02 ` Alan
2007-02-02 21:43 ` Andrew Morton
2007-02-02 22:41 ` Linus Torvalds
2007-02-03 0:05 ` alan
2007-02-03 0:58 ` Linus Torvalds
2007-02-07 7:11 ` Conke Hu
2007-01-30 14:27 Jeff Garzik
2007-01-25 23:58 Jeff Garzik
2007-01-24 7:19 Jeff Garzik
2007-01-24 21:54 ` Brian King
2007-01-22 18:55 Jeff Garzik
2006-12-20 21:00 Jeff Garzik
2006-12-20 21:19 ` Stephen Frost
2006-12-16 17:27 Jeff Garzik
2006-11-30 10:48 Jeff Garzik
2006-11-14 15:04 Jeff Garzik
2006-11-14 16:32 ` Mark Lord
2006-11-14 16:41 ` Jeff Garzik
2006-11-14 18:11 ` Mark Lord
2006-11-02 3:11 Jeff Garzik
2006-11-01 2:13 Jeff Garzik
2006-11-01 14:06 ` John Stoffel
2006-11-01 14:30 ` Alan Cox
2006-11-02 0:02 ` Andrew Morton
2006-11-02 1:06 ` Jeff Garzik
2006-11-02 8:00 ` Jens Axboe
2006-10-21 19:55 Jeff Garzik
2006-10-11 9:05 Jeff Garzik
2006-09-11 12:58 Jeff Garzik
2006-08-24 8:13 Jeff Garzik
2006-08-24 8:29 ` Greg KH
2006-08-24 8:56 ` Greg KH
2006-08-24 9:00 ` Jeff Garzik
2006-08-09 6:25 Jeff Garzik
2006-08-09 18:47 ` Greg KH
2006-08-09 22:45 ` Greg KH
2006-08-10 12:23 ` Jeff Garzik
2006-07-29 5:41 Jeff Garzik
2006-07-17 17:42 Jeff Garzik
2006-05-24 7:05 Jeff Garzik
2006-05-20 4:47 Jeff Garzik
2006-03-31 15:22 Jeff Garzik
2006-02-25 22:03 Jeff Garzik
2006-02-21 5:17 Jeff Garzik
2006-02-17 21:41 Jeff Garzik
2006-02-09 18:47 Jeff Garzik
2005-09-14 13:13 Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='017f01c7640b$fbcafab0$2101a8c0@donald' \
--to=rol@as2917.net \
--cc=akpm@linux-foundation.org \
--cc=edmudama@gmail.com \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).