From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Paul Rolland" Subject: RE: [git patches] libata fixes Date: Sun, 11 Mar 2007 19:34:58 +0100 Message-ID: <017f01c7640b$fbcafab0$2101a8c0@donald> References: Reply-To: Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0180_01C76414.5D8F62B0" Return-path: Received: from tag.witbe.net ([81.88.96.48]:40973 "EHLO tag.witbe.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933979AbXCKSfb (ORCPT ); Sun, 11 Mar 2007 14:35:31 -0400 In-Reply-To: Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: 'Linus Torvalds' Cc: 'Tejun Heo' , 'Jeff Garzik' , 'Andrew Morton' , linux-ide@vger.kernel.org, 'LKML' , "'Eric D. Mudama'" This is a multi-part message in MIME format. ------=_NextPart_000_0180_01C76414.5D8F62B0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello, > do I understand correctly that the *only* difference between > the working > setup is that you applied (by hand) the libata patch that > Jeff sent out? > > So plain 2.6.21-rc2 works fine, but with the patch applied, > you get no > interrupts on the DVD drive? Nope... I tried several patches from Tejun, and also some that Jeff posted to linux-ide, but no luck. The only way to have this DVD-RW working is to use irqpoll on the command line... Sorry to have been unclear.... To complete, here are some more output from the machine : - a dmesg without irqpoll, - a dmesg with irqpoll, - a copy of /proc/interrupts 6 [19:33] rol@riri:~> cat /proc/interrupts CPU0 CPU1 0: 357022 0 IO-APIC-edge timer 1: 8 0 IO-APIC-edge i8042 4: 14 0 IO-APIC-edge serial 6: 5 0 IO-APIC-edge floppy 8: 1 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 129 0 IO-APIC-edge i8042 14: 7639 0 IO-APIC-edge libata 15: 0 0 IO-APIC-edge libata 16: 0 0 IO-APIC-fasteoi libata 17: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4 19: 204 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel 20: 107 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 21: 3 0 IO-APIC-fasteoi ohci1394 504: 8243 0 PCI-MSI-edge libata 505: 1 0 PCI-MSI-edge eth1 506: 386 0 PCI-MSI-edge eth0 NMI: 771 531 LOC: 569318 578684 ERR: 0 Regards, Paul ------=_NextPart_000_0180_01C76414.5D8F62B0 Content-Type: application/octet-stream; name="dmesg-2.6.21-rc2" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg-2.6.21-rc2" Linux version 2.6.21-rc2 (root@riri.as2917.net) (gcc version 4.0.3 = (Ubuntu 4.0.3-1ubuntu5)) #4 SMP PREEMPT Sun Mar 4 19:52:39 CET 2007=0A= Command line: root=3D/dev/sde1 ro ata2=3Dnoprobe console=3DttyS0,9600 = console=3Dtty0 vga=3Dextended=0A= BIOS-provided physical RAM map:=0A= BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)=0A= BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)=0A= BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)=0A= BIOS-e820: 0000000000100000 - 00000000c7f80000 (usable)=0A= BIOS-e820: 00000000c7f80000 - 00000000c7f8e000 (ACPI data)=0A= BIOS-e820: 00000000c7f8e000 - 00000000c7fe0000 (ACPI NVS)=0A= BIOS-e820: 00000000c7fe0000 - 00000000c8000000 (reserved)=0A= BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)=0A= Entering add_active_range(0, 0, 159) 0 entries of 256 used=0A= Entering add_active_range(0, 256, 819072) 1 entries of 256 used=0A= end_pfn_map =3D 1048576=0A= DMI 2.4 present.=0A= ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)=0A= ACPI: XSDT C7F80100, 005C (r1 A_M_I_ OEMXSDT 12000608 MSFT 97)=0A= ACPI: FACP C7F80290, 00F4 (r3 A_M_I_ OEMFACP 12000608 MSFT 97)=0A= ACPI: DSDT C7F80410, 8FC4 (r1 A0543 A0543000 0 INTL 20060113)=0A= ACPI: FACS C7F8E000, 0040=0A= ACPI: APIC C7F80390, 0080 (r1 A_M_I_ OEMAPIC 12000608 MSFT 97)=0A= ACPI: OEMB C7F8E040, 0066 (r1 A_M_I_ AMI_OEM 12000608 MSFT 97)=0A= ACPI: HPET C7F893E0, 0038 (r1 A_M_I_ OEMHPET 12000608 MSFT 97)=0A= ACPI: MCFG C7F89420, 003C (r1 A_M_I_ OEMMCFG 12000608 MSFT 97)=0A= ACPI: SSDT C7F8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)=0A= ACPI: SSDT C7F8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)=0A= Entering add_active_range(0, 0, 159) 0 entries of 256 used=0A= Entering add_active_range(0, 256, 819072) 1 entries of 256 used=0A= Zone PFN ranges:=0A= DMA 0 -> 4096=0A= DMA32 4096 -> 1048576=0A= Normal 1048576 -> 1048576=0A= early_node_map[2] active PFN ranges=0A= 0: 0 -> 159=0A= 0: 256 -> 819072=0A= On node 0 totalpages: 818975=0A= DMA zone: 56 pages used for memmap=0A= DMA zone: 1986 pages reserved=0A= DMA zone: 1957 pages, LIFO batch:0=0A= DMA32 zone: 11142 pages used for memmap=0A= DMA32 zone: 803834 pages, LIFO batch:31=0A= Normal zone: 0 pages used for memmap=0A= ACPI: PM-Timer IO Port: 0x808=0A= ACPI: Local APIC address 0xfee00000=0A= ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)=0A= Processor #0 (Bootup-CPU)=0A= ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)=0A= Processor #1=0A= ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)=0A= ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)=0A= ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])=0A= IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)=0A= ACPI: IRQ0 used by override.=0A= ACPI: IRQ2 used by override.=0A= ACPI: IRQ9 used by override.=0A= Setting APIC routing to flat=0A= ACPI: HPET id: 0x8086a201 base: 0xfed00000=0A= Using ACPI (MADT) for SMP configuration information=0A= Nosave address range: 000000000009f000 - 00000000000a0000=0A= Nosave address range: 00000000000a0000 - 00000000000e4000=0A= Nosave address range: 00000000000e4000 - 0000000000100000=0A= Allocating PCI resources starting at cc000000 (gap: c8000000:37b00000)=0A= PERCPU: Allocating 34368 bytes of per cpu data=0A= Built 1 zonelists. Total pages: 805791=0A= Kernel command line: root=3D/dev/sde1 ro ata2=3Dnoprobe = console=3DttyS0,9600 console=3Dtty0 vga=3Dextended=0A= Initializing CPU#0=0A= PID hash table entries: 4096 (order: 12, 32768 bytes)=0A= time.c: Detected 2400.083 MHz processor.=0A= Console: colour VGA+ 80x50=0A= Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)=0A= Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)=0A= Checking aperture...=0A= Memory: 3216500k/3276288k available (4563k kernel code, 59172k reserved, = 2317k data, 296k init)=0A= Calibrating delay using timer specific routine.. 4802.77 BogoMIPS = (lpj=3D2401386)=0A= Security Framework v1.0.0 initialized=0A= Capability LSM initialized=0A= Failure registering Root Plug module with the kernel=0A= Failure registering Root Plug module with primary security module.=0A= Mount-cache hash table entries: 256=0A= CPU: L1 I cache: 32K, L1 D cache: 32K=0A= CPU: L2 cache: 4096K=0A= using mwait in idle threads.=0A= CPU: Physical Processor ID: 0=0A= CPU: Processor Core ID: 0=0A= CPU0: Thermal monitoring enabled (TM2)=0A= Freeing SMP alternatives: 40k freed=0A= ACPI: Core revision 20070126=0A= Using local APIC timer interrupts.=0A= result 10130463=0A= Detected 10.130 MHz APIC timer.=0A= Booting processor 1/2 APIC 0x1=0A= Initializing CPU#1=0A= Calibrating delay using timer specific routine.. 4800.35 BogoMIPS = (lpj=3D2400179)=0A= CPU: L1 I cache: 32K, L1 D cache: 32K=0A= CPU: L2 cache: 4096K=0A= CPU: Physical Processor ID: 0=0A= CPU: Processor Core ID: 1=0A= CPU1: Thermal monitoring enabled (TM2)=0A= Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06=0A= checking TSC synchronization [CPU#0 -> CPU#1]: passed.=0A= Brought up 2 CPUs=0A= testing NMI watchdog ... OK.=0A= migration_cost=3D21=0A= NET: Registered protocol family 16=0A= ACPI: bus type pci registered=0A= PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved=0A= PCI: Not using MMCONFIG.=0A= PCI: Using configuration type 1=0A= ACPI: Interpreter enabled=0A= ACPI: Using IOAPIC for interrupt routing=0A= ACPI: PCI Root Bridge [PCI0] (0000:00)=0A= PCI: Probing PCI hardware (bus 00)=0A= PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO=0A= PCI quirk: region 0480-04bf claimed by ICH6 GPIO=0A= Boot video device is 0000:06:00.0=0A= PCI: Transparent bridge - 0000:00:1e.0=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]=0A= ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)=0A= Linux Plug and Play Support v0.97 (c) Adam Belay=0A= pnp: PnP ACPI init=0A= pnp: PnP ACPI: found 16 devices=0A= SCSI subsystem initialized=0A= libata version 2.20 loaded.=0A= usbcore: registered new interface driver usbfs=0A= usbcore: registered new interface driver hub=0A= usbcore: registered new device driver usb=0A= PCI: Using ACPI for IRQ routing=0A= PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post = a report=0A= PCI: Cannot allocate resource region 2 of device 0000:02:00.0=0A= PCI: Cannot allocate resource region 3 of device 0000:02:00.0=0A= PCI-GART: No AMD northbridge found.=0A= hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0=0A= hpet0: 3 64-bit timers, 14318180 Hz=0A= pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved=0A= pnp: 00:07: ioport range 0x290-0x297 has been reserved=0A= pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved=0A= pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved=0A= pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved=0A= pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved=0A= pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved=0A= pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved=0A= pnp: 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved=0A= pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved=0A= pnp: 00:0f: iomem range 0xc0000-0xdffff has been reserved=0A= pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved=0A= pnp: 00:0f: iomem range 0x100000-0xc7ffffff could not be reserved=0A= ieee1394: Initialized config rom entry `ip1394'=0A= ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21=0A= ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[21] = MMIO=3D[ff5ef800-ff5effff] Max Packet=3D[2048] IR/IT contexts=3D[4/8]=0A= PCI: Bridge: 0000:00:01.0=0A= IO window: c000-cfff=0A= MEM window: ff900000-ff9fffff=0A= PREFETCH window: cff00000-efefffff=0A= PCI: Bridge: 0000:00:1c.0=0A= IO window: disabled.=0A= MEM window: disabled.=0A= PREFETCH window: cfe00000-cfefffff=0A= PCI: Bridge: 0000:00:1c.3=0A= IO window: b000-bfff=0A= MEM window: ff800000-ff8fffff=0A= PREFETCH window: disabled.=0A= PCI: Bridge: 0000:00:1c.4=0A= IO window: a000-afff=0A= MEM window: ff700000-ff7fffff=0A= PREFETCH window: disabled.=0A= PCI: Bridge: 0000:00:1c.5=0A= IO window: 9000-9fff=0A= MEM window: ff600000-ff6fffff=0A= PREFETCH window: disabled.=0A= PCI: Bridge: 0000:00:1e.0=0A= IO window: 8000-8fff=0A= MEM window: ff500000-ff5fffff=0A= PREFETCH window: disabled.=0A= ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:00:01.0 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:00:1c.0 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:00:1c.3 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:00:1c.4 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17=0A= PCI: Setting latency timer of device 0000:00:1c.5 to 64=0A= PCI: Setting latency timer of device 0000:00:1e.0 to 64=0A= NET: Registered protocol family 2=0A= IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)=0A= TCP established hash table entries: 131072 (order: 9, 3145728 bytes)=0A= ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000fefb23]=0A= TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)=0A= TCP: Hash tables configured (established 131072 bind 65536)=0A= TCP reno registered=0A= IA-32 Microcode Update Driver: v1.14a =0A= VFS: Disk quotas dquot_6.5.1=0A= Dquot-cache hash table entries: 512 (order 0, 4096 bytes)=0A= NTFS driver 2.1.28 [Flags: R/W].=0A= fuse init (API version 7.8)=0A= io scheduler noop registered=0A= io scheduler anticipatory registered (default)=0A= io scheduler deadline registered=0A= io scheduler cfq registered=0A= PCI: Setting latency timer of device 0000:00:01.0 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:01.0:pcie00]=0A= PCI: Setting latency timer of device 0000:00:1c.0 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.0:pcie00]=0A= Allocate Port Service[0000:00:1c.0:pcie02]=0A= PCI: Setting latency timer of device 0000:00:1c.3 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.3:pcie00]=0A= PCI: Setting latency timer of device 0000:00:1c.4 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.4:pcie00]=0A= PCI: Setting latency timer of device 0000:00:1c.5 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.5:pcie00]=0A= input: Power Button (FF) as /class/input/input0=0A= ACPI: Power Button (FF) [PWRF]=0A= input: Power Button (CM) as /class/input/input1=0A= ACPI: Power Button (CM) [PWRB]=0A= ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 78, = should be 6F [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU1._OSC] (Node ffff81000424cb30), AE_ALREADY_EXISTS=0A= ACPI: Marking method _OSC as Serialized=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU1._PDC] (Node ffff81000424cb50), AE_ALREADY_EXISTS=0A= ACPI: Marking method _PDC as Serialized=0A= ACPI: Processor [CPU1] (supports 8 throttling states)=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU2._OSC] (Node ffff81000424ca10), AE_ALREADY_EXISTS=0A= ACPI: Marking method _OSC as Serialized=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU2._PDC] (Node ffff81000424ca30), AE_ALREADY_EXISTS=0A= ACPI: Marking method _PDC as Serialized=0A= ACPI: Processor [CPU2] (supports 8 throttling states)=0A= Real Time Clock Driver v1.12ac=0A= hpet_resources: 0xfed00000 is busy=0A= Non-volatile memory driver v1.2=0A= intel_rng: FWH not detected=0A= iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)=0A= iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=3D2, = TCOBASE=3D0x0860)=0A= iTCO_wdt: initialized. heartbeat=3D30 sec (nowayout=3D0)=0A= iTCO_vendor_support: vendor-support=3D0=0A= Linux agpgart interface v0.102 (c) Dave Jones=0A= [drm] Initialized drm 1.1.0 20060810=0A= Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin = is 60 seconds).=0A= Hangcheck: Using get_cycles().=0A= Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled=0A= serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0A= 00:0d: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0A= Floppy drive(s): fd0 is 1.44M=0A= FDC 0 is a post-1991 82077=0A= RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize=0A= loop: loaded (max 8 devices)=0A= nbd: registered device at major 43=0A= ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:04:00.0 to 64=0A= sky2 0000:04:00.0: v1.13 addr 0xff8fc000 irq 19 Yukon-EC (0xb6) rev 2=0A= sky2 eth0: addr 00:18:f3:e0:5d:d4=0A= ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:03:00.0 to 64=0A= sky2 0000:03:00.0: v1.13 addr 0xff7fc000 irq 16 Yukon-EC (0xb6) rev 2=0A= sky2 eth1: addr 00:18:f3:e0:36:fd=0A= PPP generic driver version 2.4.2=0A= PPP Deflate Compression module registered=0A= PPP BSD Compression module registered=0A= PPP MPPE Compression module registered=0A= Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller = (davem@redhat.com)=0A= tun: Universal TUN/TAP device driver, 1.6=0A= tun: (C) 1999-2004 Max Krasnyansky =0A= ahci 0000:00:1f.2: version 2.1=0A= ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23=0A= PCI: Setting latency timer of device 0000:00:1f.2 to 64=0A= ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA = mode=0A= ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part =0A= ata1: SATA max UDMA/133 cmd 0xffffc2000008a900 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= ata2: SATA max UDMA/133 cmd 0xffffc2000008a980 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= ata3: SATA max UDMA/133 cmd 0xffffc2000008aa00 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= ata4: SATA max UDMA/133 cmd 0xffffc2000008aa80 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= scsi0 : ahci=0A= ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133=0A= ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)=0A= ata1.00: configured for UDMA/133=0A= scsi1 : ahci=0A= ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A= ata2.00: qc timeout (cmd 0xec)=0A= ata2.00: failed to IDENTIFY (I/O error, err_mask=3D0x104)=0A= ata2: port is slow to respond, please be patient (Status 0x80)=0A= ata2: port failed to respond (30 secs, Status 0x80)=0A= ata2: COMRESET failed (device not ready)=0A= ata2: hardreset failed, retrying in 5 secs=0A= ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A= ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133=0A= ata2.00: 640 sectors, multi 1: LBA =0A= ata2.00: configured for UDMA/133=0A= scsi2 : ahci=0A= ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133=0A= ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)=0A= ata3.00: configured for UDMA/133=0A= scsi3 : ahci=0A= ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A= ata4.00: ATA-7: ST3500641AS, 3.AAB, max UDMA/133=0A= ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)=0A= ata4.00: configured for UDMA/133=0A= scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 = ANSI: 5=0A= SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)=0A= sda: Write Protect is off=0A= sda: Mode Sense: 00 3a 00 00=0A= SCSI device sda: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)=0A= sda: Write Protect is off=0A= sda: Mode Sense: 00 3a 00 00=0A= SCSI device sda: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sda: sda1 sda2 sda3=0A= sd 0:0:0:0: Attached scsi disk sda=0A= sd 0:0:0:0: Attached scsi generic sg0 type 0=0A= scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 = ANSI: 5=0A= SCSI device sdb: 640 512-byte hdwr sectors (0 MB)=0A= sdb: Write Protect is off=0A= sdb: Mode Sense: 00 3a 00 00=0A= SCSI device sdb: write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sdb: 640 512-byte hdwr sectors (0 MB)=0A= sdb: Write Protect is off=0A= sdb: Mode Sense: 00 3a 00 00=0A= SCSI device sdb: write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdb: unknown partition table=0A= sd 1:0:0:0: Attached scsi disk sdb=0A= sd 1:0:0:0: Attached scsi generic sg1 type 0=0A= scsi 2:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 = ANSI: 5=0A= SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)=0A= sdc: Write Protect is off=0A= sdc: Mode Sense: 00 3a 00 00=0A= SCSI device sdc: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)=0A= sdc: Write Protect is off=0A= sdc: Mode Sense: 00 3a 00 00=0A= SCSI device sdc: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdc: sdc1 sdc2=0A= sd 2:0:0:0: Attached scsi disk sdc=0A= sd 2:0:0:0: Attached scsi generic sg2 type 0=0A= scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 = ANSI: 5=0A= SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)=0A= sdd: Write Protect is off=0A= sdd: Mode Sense: 00 3a 00 00=0A= SCSI device sdd: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)=0A= sdd: Write Protect is off=0A= sdd: Mode Sense: 00 3a 00 00=0A= SCSI device sdd: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdd: sdd1 sdd2 sdd3=0A= sd 3:0:0:0: Attached scsi disk sdd=0A= sd 3:0:0:0: Attached scsi generic sg3 type 0=0A= PCI: Device 0000:02:00.0 not available because of resource collisions=0A= ahci: probe of 0000:02:00.0 failed with error -22=0A= ata_piix 0000:00:1f.1: version 2.10=0A= ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22=0A= PCI: Setting latency timer of device 0000:00:1f.1 to 64=0A= ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 = bmdma 0x000000000001ffa0 irq 14=0A= ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 = bmdma 0x000000000001ffa8 irq 15=0A= scsi4 : ata_piix=0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.00: ATA-7: Maxtor 6L200P0, BAH41E00, max UDMA/133=0A= ata5.00: 398297088 sectors, multi 16: LBA48 =0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.01: ATAPI, max UDMA/33=0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.00: configured for UDMA/33=0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.01: configured for UDMA/33=0A= scsi5 : ata_piix=0A= ATA: abnormal status 0x7F on port 0x0000000000010177=0A= scsi 4:0:0:0: Direct-Access ATA Maxtor 6L200P0 BAH4 PQ: 0 = ANSI: 5=0A= SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)=0A= sde: Write Protect is off=0A= sde: Mode Sense: 00 3a 00 00=0A= SCSI device sde: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)=0A= sde: Write Protect is off=0A= sde: Mode Sense: 00 3a 00 00=0A= SCSI device sde: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sde: sde1 sde2 sde3 sde4 < sde5 sde6 >=0A= sd 4:0:0:0: Attached scsi disk sde=0A= sd 4:0:0:0: Attached scsi generic sg4 type 0=0A= scsi 4:0:1:0: CD-ROM ASUS CRW-5232A3 1.00 PQ: 0 = ANSI: 5=0A= sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray=0A= Uniform CD-ROM driver Revision: 3.20=0A= sr 4:0:1:0: Attached scsi CD-ROM sr0=0A= sr 4:0:1:0: Attached scsi generic sg5 type 5=0A= PCI: Enabling device 0000:02:00.1 (0000 -> 0001)=0A= ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:02:00.1 to 64=0A= ata7: PATA max UDMA/100 cmd 0x0000000000019c00 ctl 0x0000000000019882 = bmdma 0x0000000000019400 irq 16=0A= ata8: PATA max UDMA/100 cmd 0x0000000000019800 ctl 0x0000000000019482 = bmdma 0x0000000000019408 irq 16=0A= scsi6 : pata_jmicron=0A= ata7.00: ATAPI, max UDMA/66=0A= ata7.00: qc timeout (cmd 0xef)=0A= ata7.00: failed to set xfermode (err_mask=3D0x4)=0A= ata7: failed to recover some devices, retrying in 5 secs=0A= ata7.00: qc timeout (cmd 0xef)=0A= ata7.00: failed to set xfermode (err_mask=3D0x4)=0A= ata7.00: limiting speed to UDMA/66:PIO3=0A= ata7: failed to recover some devices, retrying in 5 secs=0A= ata7.00: qc timeout (cmd 0xef)=0A= ata7.00: failed to set xfermode (err_mask=3D0x4)=0A= ata7.00: disabled=0A= scsi7 : pata_jmicron=0A= ATA: abnormal status 0x7F on port 0x0000000000019807=0A= video1394: Installed video1394 module=0A= ieee1394: raw1394: /dev/raw1394 device initialized=0A= ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20=0A= PCI: Setting latency timer of device 0000:00:1d.7 to 64=0A= ehci_hcd 0000:00:1d.7: EHCI Host Controller=0A= ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1=0A= ehci_hcd 0000:00:1d.7: debug port 1=0A= PCI: cache line size of 32 is not supported by device 0000:00:1d.7=0A= ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffafbc00=0A= ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004=0A= usb usb1: configuration #1 chosen from 1 choice=0A= hub 1-0:1.0: USB hub found=0A= hub 1-0:1.0: 8 ports detected=0A= USB Universal Host Controller Interface driver v3.0=0A= ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20=0A= PCI: Setting latency timer of device 0000:00:1d.0 to 64=0A= uhci_hcd 0000:00:1d.0: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2=0A= uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480=0A= usb usb2: configuration #1 chosen from 1 choice=0A= hub 2-0:1.0: USB hub found=0A= hub 2-0:1.0: 2 ports detected=0A= ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17=0A= PCI: Setting latency timer of device 0000:00:1d.1 to 64=0A= uhci_hcd 0000:00:1d.1: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3=0A= uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800=0A= usb usb3: configuration #1 chosen from 1 choice=0A= hub 3-0:1.0: USB hub found=0A= hub 3-0:1.0: 2 ports detected=0A= ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18=0A= PCI: Setting latency timer of device 0000:00:1d.2 to 64=0A= uhci_hcd 0000:00:1d.2: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4=0A= uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880=0A= usb usb4: configuration #1 chosen from 1 choice=0A= hub 4-0:1.0: USB hub found=0A= hub 4-0:1.0: 2 ports detected=0A= ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:00:1d.3 to 64=0A= uhci_hcd 0000:00:1d.3: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5=0A= uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00=0A= usb usb5: configuration #1 chosen from 1 choice=0A= hub 5-0:1.0: USB hub found=0A= hub 5-0:1.0: 2 ports detected=0A= usb 1-7: new high speed USB device using ehci_hcd and address 3=0A= usb 1-7: configuration #1 chosen from 1 choice=0A= hub 1-7:1.0: USB hub found=0A= hub 1-7:1.0: 4 ports detected=0A= usb 2-2: new full speed USB device using uhci_hcd and address 2=0A= usb 2-2: configuration #1 chosen from 1 choice=0A= usb 1-7.3: new high speed USB device using ehci_hcd and address 4=0A= usb 1-7.3: configuration #1 chosen from 1 choice=0A= usbcore: registered new interface driver usblp=0A= drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver=0A= Initializing USB Mass Storage driver...=0A= usbcore: registered new interface driver usb-storage=0A= USB Mass Storage support registered.=0A= usbcore: registered new interface driver hiddev=0A= usbcore: registered new interface driver usbhid=0A= drivers/usb/input/hid-core.c: v2.6:USB HID core driver=0A= PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12=0A= serio: i8042 KBD port at 0x60,0x64 irq 1=0A= serio: i8042 AUX port at 0x60,0x64 irq 12=0A= mice: PS/2 mouse device common for all mice=0A= input: AT Translated Set 2 keyboard as /class/input/input2=0A= input: PC Speaker as /class/input/input3=0A= input: ImExPS/2 Logitech MX Mouse as /class/input/input4=0A= I2O subsystem v1.325=0A= i2o: max drivers =3D 8=0A= I2O Configuration OSM v1.323=0A= I2O Bus Adapter OSM v1.317=0A= I2O Block Device OSM v1.325=0A= I2O ProcFS OSM v1.316=0A= i2c /dev entries driver=0A= ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23=0A= md: linear personality registered for level -1=0A= md: raid0 personality registered for level 0=0A= md: raid1 personality registered for level 1=0A= Advanced Linux Sound Architecture Driver Version 1.0.14rc2 (Wed Feb 14 = 07:42:13 2007 UTC).=0A= ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:00:1b.0 to 64=0A= ALSA device list:=0A= #0: HDA Intel at 0xffafc000 irq 19=0A= netem: version 1.2=0A= u32 classifier=0A= Performance counters on=0A= OLD policer on =0A= Netfilter messages via NETLINK v0.30.=0A= IPv4 over IPv4 tunneling driver=0A= GRE over IPv4 tunneling driver=0A= TCP cubic registered=0A= Initializing XFRM netlink socket=0A= NET: Registered protocol family 1=0A= NET: Registered protocol family 10=0A= lo: Disabled Privacy Extensions=0A= IPv6: add_dev failed for eql=0A= tunl0: Disabled Privacy Extensions=0A= IPv6 over IPv4 tunneling driver=0A= sit0: Disabled Privacy Extensions=0A= NET: Registered protocol family 17=0A= NET: Registered protocol family 15=0A= 802.1Q VLAN Support v1.8 Ben Greear =0A= All bugs added by David S. Miller =0A= ieee80211: 802.11 data/management/control stack, git-1.1.13=0A= ieee80211: Copyright (C) 2004-2005 Intel Corporation = =0A= ieee80211_crypt: registered algorithm 'NULL'=0A= ieee80211_crypt: registered algorithm 'WEP'=0A= ieee80211_crypt: registered algorithm 'CCMP'=0A= ieee80211_crypt: registered algorithm 'TKIP'=0A= drivers/rtc/hctosys.c: unable to open rtc device (rtc0)=0A= Time: tsc clocksource has been installed.=0A= md: Autodetecting RAID arrays.=0A= md: autorun ...=0A= md: ... autorun DONE.=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= VFS: Mounted root (ext3 filesystem) readonly.=0A= Freeing unused kernel memory: 296k freed=0A= EXT3 FS on sde1, internal journal=0A= sky2 eth0: enabling interface=0A= sky2 eth0: ram buffer 48K=0A= ADDRCONF(NETDEV_UP): eth0: link is not ready=0A= sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both=0A= ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3 FS on sde6, internal journal=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3 FS on sde3, internal journal=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= Adding 2096436k swap on /dev/sde5. Priority:-1 extents:1 across:2096436k=0A= Adding 4192956k swap on /dev/sda3. Priority:-2 extents:1 across:4192956k=0A= ata3.00: exception Emask 0x2 SAct 0xffff80 SErr 0x0 action 0x2 frozen=0A= ata3.00: (spurious completion during NCQ issue=3D0x0 SAct=3D0xffff80 = FIS=3D004040a1:00000040)=0A= ata3.00: cmd 60/04:38:83:00:00/00:00:00:00:00/40 tag 7 cdb 0x0 data 2048 = in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:40:87:00:00/00:00:00:00:00/40 tag 8 cdb 0x0 data 2048 = in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:48:8b:00:00/00:00:00:00:00/40 tag 9 cdb 0x0 data 2048 = in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:50:8f:00:00/00:00:00:00:00/40 tag 10 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:58:93:00:00/00:00:00:00:00/40 tag 11 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:60:97:00:00/00:00:00:00:00/40 tag 12 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:68:9b:00:00/00:00:00:00:00/40 tag 13 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:70:9f:00:00/00:00:00:00:00/40 tag 14 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:78:a3:00:00/00:00:00:00:00/40 tag 15 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:80:a7:00:00/00:00:00:00:00/40 tag 16 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:88:ab:00:00/00:00:00:00:00/40 tag 17 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:90:af:00:00/00:00:00:00:00/40 tag 18 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:98:b3:00:00/00:00:00:00:00/40 tag 19 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:a0:b7:00:00/00:00:00:00:00/40 tag 20 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:a8:bb:00:00/00:00:00:00:00/40 tag 21 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:b0:bf:00:00/00:00:00:00:00/40 tag 22 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3.00: cmd 60/04:b8:c3:00:00/00:00:00:00:00/40 tag 23 cdb 0x0 data = 2048 in=0A= res 40/00:b8:c3:00:00/00:00:00:00:00/40 Emask 0x2 (HSM = violation)=0A= ata3: soft resetting port=0A= ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.00: configured for UDMA/133=0A= ata3: EH complete=0A= SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)=0A= sdc: Write Protect is off=0A= sdc: Mode Sense: 00 3a 00 00=0A= SCSI device sdc: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= ttyS1: LSR safety check engaged!=0A= ttyS1: LSR safety check engaged!=0A= eth0: no IPv6 routers present=0A= ttyS1: LSR safety check engaged!=0A= ------=_NextPart_000_0180_01C76414.5D8F62B0 Content-Type: application/octet-stream; name="dmesg-2.6.21-rc2-irqpoll-dvd" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg-2.6.21-rc2-irqpoll-dvd" Linux version 2.6.21-rc2 (root@riri.as2917.net) (gcc version 4.0.3 = (Ubuntu 4.0.3-1ubuntu5)) #4 SMP PREEMPT Sun Mar 4 19:52:39 CET 2007=0A= Command line: root=3D/dev/sde1 ro ata2=3Dnoprobe console=3DttyS0,9600 = console=3Dtty0 vga=3Dextended irqpoll=0A= BIOS-provided physical RAM map:=0A= BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)=0A= BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)=0A= BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)=0A= BIOS-e820: 0000000000100000 - 00000000c7f80000 (usable)=0A= BIOS-e820: 00000000c7f80000 - 00000000c7f8e000 (ACPI data)=0A= BIOS-e820: 00000000c7f8e000 - 00000000c7fe0000 (ACPI NVS)=0A= BIOS-e820: 00000000c7fe0000 - 00000000c8000000 (reserved)=0A= BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)=0A= Entering add_active_range(0, 0, 159) 0 entries of 256 used=0A= Entering add_active_range(0, 256, 819072) 1 entries of 256 used=0A= end_pfn_map =3D 1048576=0A= DMI 2.4 present.=0A= ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)=0A= ACPI: XSDT C7F80100, 005C (r1 A_M_I_ OEMXSDT 12000608 MSFT 97)=0A= ACPI: FACP C7F80290, 00F4 (r3 A_M_I_ OEMFACP 12000608 MSFT 97)=0A= ACPI: DSDT C7F80410, 8FC4 (r1 A0543 A0543000 0 INTL 20060113)=0A= ACPI: FACS C7F8E000, 0040=0A= ACPI: APIC C7F80390, 0080 (r1 A_M_I_ OEMAPIC 12000608 MSFT 97)=0A= ACPI: OEMB C7F8E040, 0066 (r1 A_M_I_ AMI_OEM 12000608 MSFT 97)=0A= ACPI: HPET C7F893E0, 0038 (r1 A_M_I_ OEMHPET 12000608 MSFT 97)=0A= ACPI: MCFG C7F89420, 003C (r1 A_M_I_ OEMMCFG 12000608 MSFT 97)=0A= ACPI: SSDT C7F8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)=0A= ACPI: SSDT C7F8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)=0A= Entering add_active_range(0, 0, 159) 0 entries of 256 used=0A= Entering add_active_range(0, 256, 819072) 1 entries of 256 used=0A= Zone PFN ranges:=0A= DMA 0 -> 4096=0A= DMA32 4096 -> 1048576=0A= Normal 1048576 -> 1048576=0A= early_node_map[2] active PFN ranges=0A= 0: 0 -> 159=0A= 0: 256 -> 819072=0A= On node 0 totalpages: 818975=0A= DMA zone: 56 pages used for memmap=0A= DMA zone: 1986 pages reserved=0A= DMA zone: 1957 pages, LIFO batch:0=0A= DMA32 zone: 11142 pages used for memmap=0A= DMA32 zone: 803834 pages, LIFO batch:31=0A= Normal zone: 0 pages used for memmap=0A= ACPI: PM-Timer IO Port: 0x808=0A= ACPI: Local APIC address 0xfee00000=0A= ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)=0A= Processor #0 (Bootup-CPU)=0A= ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)=0A= Processor #1=0A= ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)=0A= ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)=0A= ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])=0A= IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)=0A= ACPI: IRQ0 used by override.=0A= ACPI: IRQ2 used by override.=0A= ACPI: IRQ9 used by override.=0A= Setting APIC routing to flat=0A= ACPI: HPET id: 0x8086a201 base: 0xfed00000=0A= Using ACPI (MADT) for SMP configuration information=0A= Nosave address range: 000000000009f000 - 00000000000a0000=0A= Nosave address range: 00000000000a0000 - 00000000000e4000=0A= Nosave address range: 00000000000e4000 - 0000000000100000=0A= Allocating PCI resources starting at cc000000 (gap: c8000000:37b00000)=0A= PERCPU: Allocating 34368 bytes of per cpu data=0A= Built 1 zonelists. Total pages: 805791=0A= Kernel command line: root=3D/dev/sde1 ro ata2=3Dnoprobe = console=3DttyS0,9600 console=3Dtty0 vga=3Dextended irqpoll=0A= Misrouted IRQ fixup and polling support enabled=0A= This may significantly impact system performance=0A= Initializing CPU#0=0A= PID hash table entries: 4096 (order: 12, 32768 bytes)=0A= time.c: Detected 2400.083 MHz processor.=0A= Console: colour VGA+ 80x50=0A= Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)=0A= Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)=0A= Checking aperture...=0A= Memory: 3216500k/3276288k available (4563k kernel code, 59172k reserved, = 2317k data, 296k init)=0A= Calibrating delay using timer specific routine.. 4817.98 BogoMIPS = (lpj=3D2408991)=0A= Security Framework v1.0.0 initialized=0A= Capability LSM initialized=0A= Failure registering Root Plug module with the kernel=0A= Failure registering Root Plug module with primary security module.=0A= Mount-cache hash table entries: 256=0A= CPU: L1 I cache: 32K, L1 D cache: 32K=0A= CPU: L2 cache: 4096K=0A= using mwait in idle threads.=0A= CPU: Physical Processor ID: 0=0A= CPU: Processor Core ID: 0=0A= CPU0: Thermal monitoring enabled (TM2)=0A= Freeing SMP alternatives: 40k freed=0A= ACPI: Core revision 20070126=0A= Using local APIC timer interrupts.=0A= result 16667239=0A= Detected 16.667 MHz APIC timer.=0A= Booting processor 1/2 APIC 0x1=0A= Initializing CPU#1=0A= Calibrating delay using timer specific routine.. 4800.38 BogoMIPS = (lpj=3D2400190)=0A= CPU: L1 I cache: 32K, L1 D cache: 32K=0A= CPU: L2 cache: 4096K=0A= CPU: Physical Processor ID: 0=0A= CPU: Processor Core ID: 1=0A= CPU1: Thermal monitoring enabled (TM2)=0A= Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06=0A= checking TSC synchronization [CPU#0 -> CPU#1]: passed.=0A= Brought up 2 CPUs=0A= testing NMI watchdog ... OK.=0A= migration_cost=3D24=0A= NET: Registered protocol family 16=0A= ACPI: bus type pci registered=0A= PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved=0A= PCI: Not using MMCONFIG.=0A= PCI: Using configuration type 1=0A= ACPI: Interpreter enabled=0A= ACPI: Using IOAPIC for interrupt routing=0A= ACPI: PCI Root Bridge [PCI0] (0000:00)=0A= PCI: Probing PCI hardware (bus 00)=0A= PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO=0A= PCI quirk: region 0480-04bf claimed by ICH6 GPIO=0A= Boot video device is 0000:06:00.0=0A= PCI: Transparent bridge - 0000:00:1e.0=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]=0A= ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)=0A= ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)=0A= Linux Plug and Play Support v0.97 (c) Adam Belay=0A= pnp: PnP ACPI init=0A= pnp: PnP ACPI: found 15 devices=0A= SCSI subsystem initialized=0A= libata version 2.20 loaded.=0A= usbcore: registered new interface driver usbfs=0A= usbcore: registered new interface driver hub=0A= usbcore: registered new device driver usb=0A= PCI: Using ACPI for IRQ routing=0A= PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post = a report=0A= PCI: Cannot allocate resource region 2 of device 0000:02:00.0=0A= PCI: Cannot allocate resource region 3 of device 0000:02:00.0=0A= PCI-GART: No AMD northbridge found.=0A= hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0=0A= hpet0: 3 64-bit timers, 14318180 Hz=0A= pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved=0A= pnp: 00:07: ioport range 0x290-0x297 has been reserved=0A= pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved=0A= pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved=0A= pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved=0A= pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved=0A= pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved=0A= pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved=0A= pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved=0A= pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved=0A= pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved=0A= pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved=0A= pnp: 00:0e: iomem range 0x100000-0xc7ffffff could not be reserved=0A= ieee1394: Initialized config rom entry `ip1394'=0A= ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21=0A= ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[21] = MMIO=3D[ff5ef800-ff5effff] Max Packet=3D[2048] IR/IT contexts=3D[4/8]=0A= PCI: Bridge: 0000:00:01.0=0A= IO window: c000-cfff=0A= MEM window: ff900000-ff9fffff=0A= PREFETCH window: cff00000-efefffff=0A= PCI: Bridge: 0000:00:1c.0=0A= IO window: disabled.=0A= MEM window: disabled.=0A= PREFETCH window: cfe00000-cfefffff=0A= PCI: Bridge: 0000:00:1c.3=0A= IO window: b000-bfff=0A= MEM window: ff800000-ff8fffff=0A= PREFETCH window: disabled.=0A= PCI: Bridge: 0000:00:1c.4=0A= IO window: a000-afff=0A= MEM window: ff700000-ff7fffff=0A= PREFETCH window: disabled.=0A= PCI: Bridge: 0000:00:1c.5=0A= IO window: 9000-9fff=0A= MEM window: ff600000-ff6fffff=0A= PREFETCH window: disabled.=0A= PCI: Bridge: 0000:00:1e.0=0A= IO window: 8000-8fff=0A= MEM window: ff500000-ff5fffff=0A= PREFETCH window: disabled.=0A= ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:00:01.0 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:00:1c.0 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:00:1c.3 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:00:1c.4 to 64=0A= ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17=0A= PCI: Setting latency timer of device 0000:00:1c.5 to 64=0A= PCI: Setting latency timer of device 0000:00:1e.0 to 64=0A= NET: Registered protocol family 2=0A= IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)=0A= TCP established hash table entries: 131072 (order: 9, 3145728 bytes)=0A= ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000fefb23]=0A= TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)=0A= TCP: Hash tables configured (established 131072 bind 65536)=0A= TCP reno registered=0A= IA-32 Microcode Update Driver: v1.14a =0A= VFS: Disk quotas dquot_6.5.1=0A= Dquot-cache hash table entries: 512 (order 0, 4096 bytes)=0A= NTFS driver 2.1.28 [Flags: R/W].=0A= fuse init (API version 7.8)=0A= io scheduler noop registered=0A= io scheduler anticipatory registered (default)=0A= io scheduler deadline registered=0A= io scheduler cfq registered=0A= PCI: Setting latency timer of device 0000:00:01.0 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:01.0:pcie00]=0A= PCI: Setting latency timer of device 0000:00:1c.0 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.0:pcie00]=0A= Allocate Port Service[0000:00:1c.0:pcie02]=0A= PCI: Setting latency timer of device 0000:00:1c.3 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.3:pcie00]=0A= PCI: Setting latency timer of device 0000:00:1c.4 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.4:pcie00]=0A= PCI: Setting latency timer of device 0000:00:1c.5 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:1c.5:pcie00]=0A= input: Power Button (FF) as /class/input/input0=0A= ACPI: Power Button (FF) [PWRF]=0A= input: Power Button (CM) as /class/input/input1=0A= ACPI: Power Button (CM) [PWRB]=0A= ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 88, = should be 7F [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU1._OSC] (Node ffff81000424cb30), AE_ALREADY_EXISTS=0A= ACPI: Marking method _OSC as Serialized=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU1._PDC] (Node ffff81000424cb50), AE_ALREADY_EXISTS=0A= ACPI: Marking method _PDC as Serialized=0A= ACPI: Processor [CPU1] (supports 8 throttling states)=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU2._OSC] (Node ffff81000424ca10), AE_ALREADY_EXISTS=0A= ACPI: Marking method _OSC as Serialized=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_PR_.CPU2._PDC] (Node ffff81000424ca30), AE_ALREADY_EXISTS=0A= ACPI: Marking method _PDC as Serialized=0A= ACPI: Processor [CPU2] (supports 8 throttling states)=0A= Real Time Clock Driver v1.12ac=0A= hpet_resources: 0xfed00000 is busy=0A= Non-volatile memory driver v1.2=0A= intel_rng: FWH not detected=0A= iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)=0A= iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=3D2, = TCOBASE=3D0x0860)=0A= iTCO_wdt: initialized. heartbeat=3D30 sec (nowayout=3D0)=0A= iTCO_vendor_support: vendor-support=3D0=0A= Linux agpgart interface v0.102 (c) Dave Jones=0A= [drm] Initialized drm 1.1.0 20060810=0A= Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin = is 60 seconds).=0A= Hangcheck: Using get_cycles().=0A= Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled=0A= serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0A= 00:0c: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0A= Floppy drive(s): fd0 is 1.44M=0A= FDC 0 is a post-1991 82077=0A= RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize=0A= loop: loaded (max 8 devices)=0A= nbd: registered device at major 43=0A= ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:04:00.0 to 64=0A= sky2 0000:04:00.0: v1.13 addr 0xff8fc000 irq 19 Yukon-EC (0xb6) rev 2=0A= sky2 eth0: addr 00:18:f3:e0:5d:d4=0A= ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:03:00.0 to 64=0A= sky2 0000:03:00.0: v1.13 addr 0xff7fc000 irq 16 Yukon-EC (0xb6) rev 2=0A= sky2 eth1: addr 00:18:f3:e0:36:fd=0A= PPP generic driver version 2.4.2=0A= PPP Deflate Compression module registered=0A= PPP BSD Compression module registered=0A= PPP MPPE Compression module registered=0A= Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller = (davem@redhat.com)=0A= tun: Universal TUN/TAP device driver, 1.6=0A= tun: (C) 1999-2004 Max Krasnyansky =0A= ahci 0000:00:1f.2: version 2.1=0A= ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23=0A= PCI: Setting latency timer of device 0000:00:1f.2 to 64=0A= ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA = mode=0A= ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part =0A= ata1: SATA max UDMA/133 cmd 0xffffc2000008a900 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= ata2: SATA max UDMA/133 cmd 0xffffc2000008a980 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= ata3: SATA max UDMA/133 cmd 0xffffc2000008aa00 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= ata4: SATA max UDMA/133 cmd 0xffffc2000008aa80 ctl 0x0000000000000000 = bmdma 0x0000000000000000 irq 504=0A= scsi0 : ahci=0A= ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133=0A= ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)=0A= ata1.00: configured for UDMA/133=0A= scsi1 : ahci=0A= ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A= ata2.00: qc timeout (cmd 0xec)=0A= ata2.00: failed to IDENTIFY (I/O error, err_mask=3D0x104)=0A= ata2: port is slow to respond, please be patient (Status 0x80)=0A= ata2: port failed to respond (30 secs, Status 0x80)=0A= ata2: COMRESET failed (device not ready)=0A= ata2: hardreset failed, retrying in 5 secs=0A= ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A= ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133=0A= ata2.00: 640 sectors, multi 1: LBA =0A= ata2.00: configured for UDMA/133=0A= scsi2 : ahci=0A= ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata3.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133=0A= ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)=0A= ata3.00: configured for UDMA/133=0A= scsi3 : ahci=0A= ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A= ata4.00: ATA-7: ST3500641AS, 3.AAB, max UDMA/133=0A= ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)=0A= ata4.00: configured for UDMA/133=0A= scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 = ANSI: 5=0A= SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)=0A= sda: Write Protect is off=0A= sda: Mode Sense: 00 3a 00 00=0A= SCSI device sda: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)=0A= sda: Write Protect is off=0A= sda: Mode Sense: 00 3a 00 00=0A= SCSI device sda: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sda: sda1 sda2 sda3=0A= sd 0:0:0:0: Attached scsi disk sda=0A= sd 0:0:0:0: Attached scsi generic sg0 type 0=0A= scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 = ANSI: 5=0A= SCSI device sdb: 640 512-byte hdwr sectors (0 MB)=0A= sdb: Write Protect is off=0A= sdb: Mode Sense: 00 3a 00 00=0A= SCSI device sdb: write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sdb: 640 512-byte hdwr sectors (0 MB)=0A= sdb: Write Protect is off=0A= sdb: Mode Sense: 00 3a 00 00=0A= SCSI device sdb: write cache: disabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdb: unknown partition table=0A= sd 1:0:0:0: Attached scsi disk sdb=0A= sd 1:0:0:0: Attached scsi generic sg1 type 0=0A= scsi 2:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 = ANSI: 5=0A= SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)=0A= sdc: Write Protect is off=0A= sdc: Mode Sense: 00 3a 00 00=0A= SCSI device sdc: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)=0A= sdc: Write Protect is off=0A= sdc: Mode Sense: 00 3a 00 00=0A= SCSI device sdc: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdc: sdc1 sdc2=0A= sd 2:0:0:0: Attached scsi disk sdc=0A= sd 2:0:0:0: Attached scsi generic sg2 type 0=0A= scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 = ANSI: 5=0A= SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)=0A= sdd: Write Protect is off=0A= sdd: Mode Sense: 00 3a 00 00=0A= SCSI device sdd: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)=0A= sdd: Write Protect is off=0A= sdd: Mode Sense: 00 3a 00 00=0A= SCSI device sdd: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sdd: sdd1 sdd2 sdd3=0A= sd 3:0:0:0: Attached scsi disk sdd=0A= sd 3:0:0:0: Attached scsi generic sg3 type 0=0A= PCI: Device 0000:02:00.0 not available because of resource collisions=0A= ahci: probe of 0000:02:00.0 failed with error -22=0A= ata_piix 0000:00:1f.1: version 2.10=0A= ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22=0A= PCI: Setting latency timer of device 0000:00:1f.1 to 64=0A= ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 = bmdma 0x000000000001ffa0 irq 14=0A= ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 = bmdma 0x000000000001ffa8 irq 15=0A= scsi4 : ata_piix=0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.00: ATA-7: Maxtor 6L200P0, BAH41E00, max UDMA/133=0A= ata5.00: 398297088 sectors, multi 16: LBA48 =0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.01: ATAPI, max UDMA/33=0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.00: configured for UDMA/33=0A= ACPI Error (dsopcode-0481): Attempt to CreateField of length zero = [20070126]=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.RATA] (Node ffff81000425c490), AE_AML_OPERAND_VALUE=0A= ACPI Error (psparse-0537): Method parse/execution failed = [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node ffff81000425c7f0), = AE_AML_OPERAND_VALUE=0A= ata5.01: configured for UDMA/33=0A= scsi5 : ata_piix=0A= ATA: abnormal status 0x7F on port 0x0000000000010177=0A= scsi 4:0:0:0: Direct-Access ATA Maxtor 6L200P0 BAH4 PQ: 0 = ANSI: 5=0A= SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)=0A= sde: Write Protect is off=0A= sde: Mode Sense: 00 3a 00 00=0A= SCSI device sde: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)=0A= sde: Write Protect is off=0A= sde: Mode Sense: 00 3a 00 00=0A= SCSI device sde: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sde: sde1 sde2 sde3 sde4 < sde5 sde6 >=0A= sd 4:0:0:0: Attached scsi disk sde=0A= sd 4:0:0:0: Attached scsi generic sg4 type 0=0A= scsi 4:0:1:0: CD-ROM ASUS CRW-5232A3 1.00 PQ: 0 = ANSI: 5=0A= sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray=0A= Uniform CD-ROM driver Revision: 3.20=0A= sr 4:0:1:0: Attached scsi CD-ROM sr0=0A= sr 4:0:1:0: Attached scsi generic sg5 type 5=0A= PCI: Enabling device 0000:02:00.1 (0000 -> 0001)=0A= ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:02:00.1 to 64=0A= ata7: PATA max UDMA/100 cmd 0x0000000000019c00 ctl 0x0000000000019882 = bmdma 0x0000000000019400 irq 16=0A= ata8: PATA max UDMA/100 cmd 0x0000000000019800 ctl 0x0000000000019482 = bmdma 0x0000000000019408 irq 16=0A= scsi6 : pata_jmicron=0A= ata7.00: ATAPI, max UDMA/66=0A= ata7.00: configured for UDMA/66=0A= scsi7 : pata_jmicron=0A= ATA: abnormal status 0x7F on port 0x0000000000019807=0A= scsi 6:0:0:0: CD-ROM ASUS DRW-1608P 1.40 PQ: 0 = ANSI: 5=0A= sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray=0A= sr 6:0:0:0: Attached scsi CD-ROM sr1=0A= sr 6:0:0:0: Attached scsi generic sg6 type 5=0A= video1394: Installed video1394 module=0A= ieee1394: raw1394: /dev/raw1394 device initialized=0A= ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20=0A= PCI: Setting latency timer of device 0000:00:1d.7 to 64=0A= ehci_hcd 0000:00:1d.7: EHCI Host Controller=0A= ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1=0A= ehci_hcd 0000:00:1d.7: debug port 1=0A= PCI: cache line size of 32 is not supported by device 0000:00:1d.7=0A= ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffafbc00=0A= ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004=0A= usb usb1: configuration #1 chosen from 1 choice=0A= hub 1-0:1.0: USB hub found=0A= hub 1-0:1.0: 8 ports detected=0A= USB Universal Host Controller Interface driver v3.0=0A= ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20=0A= PCI: Setting latency timer of device 0000:00:1d.0 to 64=0A= uhci_hcd 0000:00:1d.0: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2=0A= uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480=0A= usb usb2: configuration #1 chosen from 1 choice=0A= hub 2-0:1.0: USB hub found=0A= hub 2-0:1.0: 2 ports detected=0A= ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17=0A= PCI: Setting latency timer of device 0000:00:1d.1 to 64=0A= uhci_hcd 0000:00:1d.1: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3=0A= uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800=0A= usb usb3: configuration #1 chosen from 1 choice=0A= hub 3-0:1.0: USB hub found=0A= hub 3-0:1.0: 2 ports detected=0A= usb 1-7: new high speed USB device using ehci_hcd and address 2=0A= ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18=0A= PCI: Setting latency timer of device 0000:00:1d.2 to 64=0A= uhci_hcd 0000:00:1d.2: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4=0A= uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880=0A= usb usb4: configuration #1 chosen from 1 choice=0A= hub 4-0:1.0: USB hub found=0A= hub 4-0:1.0: 2 ports detected=0A= ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:00:1d.3 to 64=0A= uhci_hcd 0000:00:1d.3: UHCI Host Controller=0A= uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5=0A= uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00=0A= usb usb5: configuration #1 chosen from 1 choice=0A= hub 5-0:1.0: USB hub found=0A= hub 5-0:1.0: 2 ports detected=0A= usb 1-7: configuration #1 chosen from 1 choice=0A= hub 1-7:1.0: USB hub found=0A= hub 1-7:1.0: 4 ports detected=0A= usb 1-7.3: new high speed USB device using ehci_hcd and address 3=0A= usb 1-7.3: configuration #1 chosen from 1 choice=0A= usbcore: registered new interface driver usblp=0A= drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver=0A= Initializing USB Mass Storage driver...=0A= usbcore: registered new interface driver usb-storage=0A= USB Mass Storage support registered.=0A= usbcore: registered new interface driver hiddev=0A= usbcore: registered new interface driver usbhid=0A= drivers/usb/input/hid-core.c: v2.6:USB HID core driver=0A= PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1=0A= PNP: PS/2 controller doesn't have AUX irq; using default 12=0A= serio: i8042 KBD port at 0x60,0x64 irq 1=0A= serio: i8042 AUX port at 0x60,0x64 irq 12=0A= mice: PS/2 mouse device common for all mice=0A= input: AT Translated Set 2 keyboard as /class/input/input2=0A= input: PC Speaker as /class/input/input3=0A= I2O subsystem v1.325=0A= i2o: max drivers =3D 8=0A= I2O Configuration OSM v1.323=0A= I2O Bus Adapter OSM v1.317=0A= I2O Block Device OSM v1.325=0A= I2O ProcFS OSM v1.316=0A= i2c /dev entries driver=0A= ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23=0A= md: linear personality registered for level -1=0A= md: raid0 personality registered for level 0=0A= md: raid1 personality registered for level 1=0A= Advanced Linux Sound Architecture Driver Version 1.0.14rc2 (Wed Feb 14 = 07:42:13 2007 UTC).=0A= ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:00:1b.0 to 64=0A= ALSA device list:=0A= #0: HDA Intel at 0xffafc000 irq 19=0A= netem: version 1.2=0A= u32 classifier=0A= Performance counters on=0A= OLD policer on =0A= Netfilter messages via NETLINK v0.30.=0A= IPv4 over IPv4 tunneling driver=0A= GRE over IPv4 tunneling driver=0A= TCP cubic registered=0A= Initializing XFRM netlink socket=0A= NET: Registered protocol family 1=0A= NET: Registered protocol family 10=0A= lo: Disabled Privacy Extensions=0A= IPv6: add_dev failed for eql=0A= tunl0: Disabled Privacy Extensions=0A= IPv6 over IPv4 tunneling driver=0A= sit0: Disabled Privacy Extensions=0A= NET: Registered protocol family 17=0A= NET: Registered protocol family 15=0A= 802.1Q VLAN Support v1.8 Ben Greear =0A= All bugs added by David S. Miller =0A= ieee80211: 802.11 data/management/control stack, git-1.1.13=0A= ieee80211: Copyright (C) 2004-2005 Intel Corporation = =0A= ieee80211_crypt: registered algorithm 'NULL'=0A= ieee80211_crypt: registered algorithm 'WEP'=0A= ieee80211_crypt: registered algorithm 'CCMP'=0A= ieee80211_crypt: registered algorithm 'TKIP'=0A= drivers/rtc/hctosys.c: unable to open rtc device (rtc0)=0A= Time: tsc clocksource has been installed.=0A= md: Autodetecting RAID arrays.=0A= md: autorun ...=0A= md: ... autorun DONE.=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= VFS: Mounted root (ext3 filesystem) readonly.=0A= Freeing unused kernel memory: 296k freed=0A= sky2 eth0: enabling interface=0A= sky2 eth0: ram buffer 48K=0A= ADDRCONF(NETDEV_UP): eth0: link is not ready=0A= ata1.00: exception Emask 0x2 SAct 0x7e000007 SErr 0x0 action 0x2 frozen=0A= ata1.00: (spurious completion during NCQ issue=3D0x0 SAct=3D0x7e000007 = FIS=3D004040a1:01000000)=0A= ata1.00: cmd 60/08:00:88:e1:44/00:00:0f:00:00/40 tag 0 cdb 0x0 data 4096 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/01:08:3b:eb:ff/00:00:09:00:00/40 tag 1 cdb 0x0 data 512 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/57:10:3c:eb:ff/00:00:09:00:00/40 tag 2 cdb 0x0 data = 44544 in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/01:c8:35:eb:ff/00:00:09:00:00/40 tag 25 cdb 0x0 data 512 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/01:d0:36:eb:ff/00:00:09:00:00/40 tag 26 cdb 0x0 data 512 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/01:d8:37:eb:ff/00:00:09:00:00/40 tag 27 cdb 0x0 data 512 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/01:e0:38:eb:ff/00:00:09:00:00/40 tag 28 cdb 0x0 data 512 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/01:e8:39:eb:ff/00:00:09:00:00/40 tag 29 cdb 0x0 data 512 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1.00: cmd 60/01:f0:3a:eb:ff/00:00:09:00:00/40 tag 30 cdb 0x0 data 512 = in=0A= res 40/00:10:3c:eb:ff/00:00:09:00:00/40 Emask 0x2 (HSM = violation)=0A= ata1: soft resetting port=0A= ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata1.00: configured for UDMA/133=0A= ata1: EH complete=0A= SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)=0A= sda: Write Protect is off=0A= sda: Mode Sense: 00 3a 00 00=0A= SCSI device sda: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= EXT3 FS on sde1, internal journal=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3 FS on sde6, internal journal=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3 FS on sde3, internal journal=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= Adding 2096436k swap on /dev/sde5. Priority:-1 extents:1 across:2096436k=0A= Adding 4192956k swap on /dev/sda3. Priority:-2 extents:1 across:4192956k=0A= ttyS1: LSR safety check engaged!=0A= ttyS1: LSR safety check engaged!=0A= ttyS1: LSR safety check engaged!=0A= ISO 9660 Extensions: Microsoft Joliet Level 3=0A= ISO 9660 Extensions: RRIP_1991A=0A= ------=_NextPart_000_0180_01C76414.5D8F62B0--