From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pat LaVarre Subject: Re: SATA ATAPI UDMA - first in Linux Date: 14 May 2004 14:19:50 -0600 Sender: linux-ide-owner@vger.kernel.org Message-ID: <1084565990.3084.36.camel@patibmrh9> References: <1084563800.8752.53.camel@patibmrh9><40A52683.8050604@pobox.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from email-out1.iomega.com ([147.178.1.82]:5344 "EHLO email.iomega.com") by vger.kernel.org with ESMTP id S262585AbUENUUO (ORCPT ); Fri, 14 May 2004 16:20:14 -0400 In-Reply-To: <40A52683.8050604@pobox.com> List-Id: linux-ide@vger.kernel.org To: Jeff Garzik Cc: linux-ide@vger.kernel.org > Windows and Linux have both supported SATA ATAPI -- which implicitly > includes UDMA from looking at the bridges -- for a while now, in various > OS drivers. SATA ATAPI PIO I find, easy, yes, immediately available in boot-from-CD Linux such as Knoppix. SATA ATA UDMA I have found. SATA ATAPI UDMA I have not found. Not in Linux, not in Windows. Perhaps I should blame my Silicon Image 3611CT80 1.4 bridge, and buy another? Do we all agree SATA ATAPI UDMA is missing from Linux-2.6.6 `make defconfig`? Can any of us suggest other .config options to try? > If you have an ICH5 or Silicon Image 3112, I bet you could use your > ATAPI device using the existing Linux IDE driver... I believe I have ICH5. I know I have a board labelled "Intel" "D865GBF". Pat LaVarre