From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pat LaVarre Subject: SATAPI status Date: 23 Jul 2004 10:58:45 -0600 Sender: linux-ide-owner@vger.kernel.org Message-ID: <1090601924.4850.6.camel@patibmrh9> References: <2429743E-DBFD-11D8-A213-00039398BB5E@ieee.org> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from email-out1.iomega.com ([147.178.1.82]:59605 "EHLO email.iomega.com") by vger.kernel.org with ESMTP id S267841AbUGWQ67 (ORCPT ); Fri, 23 Jul 2004 12:58:59 -0400 Received: from royntex01.iomegacorp.com (edison [10.1.1.82]) by email.iomega.com (Postfix) with ESMTP id 8DF9226CF for ; Fri, 23 Jul 2004 10:58:58 -0600 (MDT) In-Reply-To: <2429743E-DBFD-11D8-A213-00039398BB5E@ieee.org> List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Sanity check failed. Specifically, > http://marc.theaimsgroup.com/?l=linux-ide&m=109051413922708 > Subject: Re: Linux Serial ATA (SATA) status report > Date: 2004-07-22 16:35:28 Easiest for me to try first was plugging an unreleased SATAPI device into: Linux 2.6.8-rc1-bk6 i686 After defining ATA_ENABLE_ATAPI ATA_DEBUG ATA_VERBOSE_DEBUG in include/linux/libata.h, then still I saw the disappointing: kernel: ata_bus_reset: ENTER, host 2, port 1 kernel: ata_bus_softreset: ata2: bus reset via SRST kernel: ATA: abnormal status 0x80 on port 0xE007 kernel: ata_bus_reset: EXIT I guess next I'll fall back to trying an old device, and if need be an old kernel, to reestablish a base line. Til I have an interesting question or patch to share, I may remember to blog how life goes to http://linux-pel.blog-city.com/read/742498.htm Pat LaVarre