From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arvind Autar Subject: Hardrive driver issues? Date: Sun, 01 Aug 2004 00:13:08 +0200 Sender: linux-ide-owner@vger.kernel.org Message-ID: <1091311988.15039.1.camel@localhost> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7BIT Return-path: Received: from smtp18.wxs.nl ([195.121.6.14]:19884 "EHLO smtp18.wxs.nl") by vger.kernel.org with ESMTP id S264763AbUGaWOL (ORCPT ); Sat, 31 Jul 2004 18:14:11 -0400 List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, b.zolnierkiewicz@elka.pw.edu.pl, jgarzik@pobox.com, Autar022@planet.nl o, here I'm, trying to setup a box. I installed debian sarge with 2.4.25-1-386. It ran fine, but didn't work with my s-ata disk. I grabbed 2.6.8-rc2 and 2.6.8-rc1-mm1. Bot gave me the same results. My ata disk uses Amd74xx Adn the s-ata siimage/sata_sil . The amd74 got compiled in as * because that's the disk where linux got installed. siimage/sata_sil got copmiled as a module, I needed the disk to mount my fat32 partition so I could get to mine music files. I booted both kernels both of them started to freeze after a while. So I started to look in the log files and found this: (see attachment)208K Unfortunately I don't have any debugging(?) info from the Amd74xx all I know is that it gives some error about kernel bug at drivers/ide/ide-10.c:112 and it makes my computer probably freeze. I even booted with: 'noirqdebug' but the results I got where SCSI subsystem initialized ACPI : PCI interrupt 0000:01:0b[A] -> GSI 11(level , low ) -> IRQ 11 ata1 : SATA max UDMA / 100 cmd 0xE0B8E080 ctl 0xE0B8E08A bmdma 0xE0B8E000 irq 11 ata2 : SATA max UDMA / 100 cmd 0xE0B8E0C0 ctl 0xE0B8E0CA bmdma 0xE0B8E008 irq 11 and then there was a freeze I hope this problem gets solved soon. Ps: I'm not subscribed to this mailinglist, please CC me. Arvind.