From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jakub W." =?iso-8859-2?Q?J=F3=BCwicki?= Subject: sis180 on asrock k7s8xe+ -> crashes Date: Fri, 27 Aug 2004 17:30:38 +0200 Sender: linux-ide-owner@vger.kernel.org Message-ID: <1093620638.9715.17.camel@alladin.local> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from kogut.o2.pl ([212.126.20.61]:4482 "EHLO kogut.o2.pl") by vger.kernel.org with ESMTP id S266219AbUH0Pas (ORCPT ); Fri, 27 Aug 2004 11:30:48 -0400 Received: from w2ksrv.mshome.net (bme81.neoplus.adsl.tpnet.pl [83.28.224.81]) by kogut.o2.pl (o2.pl Mailer 2.0.1) with ESMTP id 51B622EE8EF for ; Fri, 27 Aug 2004 17:30:39 +0200 (CEST) List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hello, I have ASRock K7S8XE+ motherboard with SIS180. I wanted to use SATA with 2.6.8 and previous kernels, but it doesn't work - after detecting hdd system is stuck. Could you look at dmesg and tell if there are chances that in the near future it will be working? Regards, Jimm ----------------------------------- Linux version 2.6.8-gentoo-r3 (root@alladin.local) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Thu Aug 26 22:09:53 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000faaa0 ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000 ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x1fff0030 ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff00c0 ACPI: DSDT (v001 SiS 748 0x00000100 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Built 1 zonelists Kernel command line: root=/dev/hda3 vga=791 pmdisk=/dev/hda3 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1575.237 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513860k/524224k available (3324k kernel code, 9580k reserved, 839k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3129.34 BogoMIPS Security Scaffold v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1800+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 40k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................................................ Table [DSDT](id F004) - 428 Objects with 43 Devices 144 Methods 12 Regions ACPI Namespace successfully loaded at root c05580fc ACPI: IRQ9 SCI: Edge set to Level Trigger. evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000000820 on int 9 evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 10 Runtime GPEs in this block evgpeblk-0867 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 0000000000000830 on int 9 evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.............................................................................. Initialized 12/12 Regions 5/5 Fields 33/33 Buffers 28/28 Packages (437 nodes) Executing all Device _STA and_INI methods:............................................. 45 Devices found containing: 45 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 4 ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 4 (level, low) -> IRQ 4 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3 ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:0b.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Cannot allocate resource region 0 of device 0000:00:0b.0 PCI: Cannot allocate resource region 0 of device 0000:00:0b.1 vesafb: framebuffer at 0xc0000000, mapped to 0xe0807000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:54f0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Machine check exception polling timer started. devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.15 [Flags: R/O]. udf: registering filesystem SGI XFS with ACLs, no debug enabled Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Console: switching to colour frame buffer device 128x48 lp: driver loaded but no devices found Real Time Clock Driver v1.12 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). acpi_floppy_resource: 2 ioports at 0x3f2 acpi_floppy_resource: 2 ioports at 0x3f4 acpi_floppy_resource: 1 ioports at 0x3f7 floppy: controller ACPI FDC0 at I/O 0x3f2-0x3f3, 0x3f7-0x3f7 irq 6 dma channel 2 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Using cfq io scheduler nbd: registered device at major 43 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xb800, 00:02:44:67:5b:75, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD1200JB-00EVA0, ATA DISK drive hdb: TOSHIBA CD-ROM XM-6702B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.02 loaded. ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 5 (level, low) -> IRQ 5 ata1: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xCC00 irq 5 ata2: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xCC08 irq 5 ata1: dev 0 cfg 49:2f00 82:346b 83:4b01 84:4000 85:3469 86:0201 87:4000 88:003f ata1: dev 0 ATA, max UDMA/100, 78165360 sectors: irq 5: nobody cared! [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] handlers: [] Disabling IRQ #5 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sis ata2: no device found (phy stat 00000000) scsi1 : sata_sis Vendor: ATA Model: ST340016A Rev: 3.05 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0:<3>ata1: command 0xc8 timeout, stat 0x50 host_stat 0x4 p1 p2 p3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 ----------------------------------