From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: linux-ide@vger.kernel.org
Subject: How to cleanly setup legacy IDE irq ?
Date: Fri, 01 Oct 2004 13:51:34 +1000 [thread overview]
Message-ID: <1096602694.11460.29.camel@gaston> (raw)
Hi Bart !
I noticed that you are about to absolete the whole lot of IDE
default stuff
# define ide_default_io_base(index) (0)
# define ide_default_irq(base) (0)
# define ide_init_default_irq(base) (0)
and others...
So how do I do to "cleanly" tell the IDE layer that my PCI IDE
controller that shows on the PCI bus and is in legacy mode is
using some IRQs (14 & 15 typically) that are _not_ the PCI irq
line for this device ?
Ben.
next reply other threads:[~2004-10-01 3:55 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-01 3:51 Benjamin Herrenschmidt [this message]
2004-10-01 14:11 ` How to cleanly setup legacy IDE irq ? Bartlomiej Zolnierkiewicz
2004-10-02 4:30 ` Benjamin Herrenschmidt
2004-10-02 14:56 ` Bartlomiej Zolnierkiewicz
2004-10-03 0:33 ` Benjamin Herrenschmidt
2004-10-03 20:54 ` Bartlomiej Zolnierkiewicz
2004-10-03 23:42 ` Benjamin Herrenschmidt
2004-10-04 0:27 ` Bartlomiej Zolnierkiewicz
2004-10-04 1:05 ` Benjamin Herrenschmidt
2004-10-04 1:20 ` Benjamin Herrenschmidt
2004-10-04 21:35 ` Bartlomiej Zolnierkiewicz
2004-10-04 23:27 ` Benjamin Herrenschmidt
2004-10-04 1:27 ` Jeff Garzik
2004-10-04 1:26 ` Benjamin Herrenschmidt
2004-10-04 1:33 ` Jeff Garzik
2004-10-04 1:33 ` Benjamin Herrenschmidt
2004-10-04 21:21 ` Bartlomiej Zolnierkiewicz
2004-10-04 23:26 ` Benjamin Herrenschmidt
2004-10-04 23:56 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1096602694.11460.29.camel@gaston \
--to=benh@kernel.crashing.org \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).