linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] ppc32: Fix via IDE driver for pegasos
@ 2005-01-27  2:13 Benjamin Herrenschmidt
  0 siblings, 0 replies; only message in thread
From: Benjamin Herrenschmidt @ 2005-01-27  2:13 UTC (permalink / raw)
  To: Andrew Morton; +Cc: list linux-ide, Bartlomiej Zolnierkiewicz

Hi Andrew !

The Pegasos machines have the VIA IDE controller configured in a strange
way by the firmware. It claims to be fully native, but is actually
routed to legacy irqs 14 and 15.

This patch works around that in the driver. In the future, I'll try to
do an ifdef-less patch by detecting that setup from the chip, and using
the new pci_get_legacy_ide_irq() in that case, but I don't have proper
HW infos. This patch is good enough in the meantime, I'll come up with a
better one later eventually.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

--- kernel-source-2.6.8/drivers/ide/pci/via82cxxx.c.orig	2004-11-24 22:47:24.000000000 +0100
+++ kernel-source-2.6.8/drivers/ide/pci/via82cxxx.c	2004-12-26 12:10:06.900614568 +0100
@@ -36,6 +36,10 @@
 #include <linux/ide.h>
 #include <asm/io.h>
 
+#ifdef CONFIG_PPC_MULTIPLATFORM
+#include <asm/processor.h>
+#endif
+
 #include "ide-timing.h"
 
 #define DISPLAY_VIA_TIMINGS
@@ -584,6 +588,13 @@
 	hwif->tuneproc = &via82cxxx_tune_drive;
 	hwif->speedproc = &via_set_drive;
 
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	if(_machine == _MACH_chrp && _chrp_type == _CHRP_Pegasos) {
+		hwif->irq = hwif->channel ? 15 : 14;
+	}
+#endif
+
 	for (i = 0; i < 2; i++) {
 		hwif->drives[i].io_32bit = 1;
 		hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1;



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2005-01-27  2:15 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-27  2:13 [PATCH] ppc32: Fix via IDE driver for pegasos Benjamin Herrenschmidt

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).