From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-ide@vger.kernel.org,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Subject: PATCH: Allow ATI SATA to use siimage if serial ATA layer is not in use
Date: Tue, 08 Mar 2005 11:43:29 +0000 [thread overview]
Message-ID: <1110282209.28860.115.camel@localhost.localdomain> (raw)
The ATI chipset serial ATA is an SI3112 cell. While this is supported by
the sata layer (you'll need to grep by id because naughty Mr Garzik
doesn't use the PCI ID defines) the sata layer driver still gives some
users real problems.
Alan
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.11/drivers/ide/pci/siimage.c linux-2.6.11/drivers/ide/pci/siimage.c
--- linux.vanilla-2.6.11/drivers/ide/pci/siimage.c 2005-03-05 15:17:01.000000000 +0000
+++ linux-2.6.11/drivers/ide/pci/siimage.c 2005-03-07 13:18:10.000000000 +0000
@@ -48,6 +48,8 @@
{
case PCI_DEVICE_ID_SII_3112:
case PCI_DEVICE_ID_SII_1210SA:
+ case PCI_DEVICE_ID_ATI_IXP300_SATA:
+ case PCI_DEVICE_ID_ATI_IXP400_SATA:
return 1;
case PCI_DEVICE_ID_SII_680:
return 0;
@@ -1088,7 +1090,9 @@
static ide_pci_device_t siimage_chipsets[] __devinitdata = {
/* 0 */ DECLARE_SII_DEV("SiI680"),
/* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"),
- /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA")
+ /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA"),
+ /* 3 */ DECLARE_SII_DEV("ATI IXP300"),
+ /* 4 */ DECLARE_SII_DEV("ATI IXP400")
};
/**
@@ -1110,6 +1114,8 @@
#ifdef CONFIG_BLK_DEV_IDE_SATA
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
#endif
{ 0, },
};
reply other threads:[~2005-03-08 11:45 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1110282209.28860.115.camel@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox