From: Sampei <sampei02@tiscali.it>
To: linux-ide@vger.kernel.org
Subject: DriveStatusError
Date: Sun, 24 Jul 2005 21:42:52 +0200 [thread overview]
Message-ID: <1122234170.2206.49.camel@zio_budda> (raw)
I bought new Maxtor HD 80 GB but something doesn't work on Fedora Core 3
because it gives this message:
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
.
.
.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide0: reset: success
Kernel panic - not syncing: mm/mmap.c:534: spin_lock(mm/rmap.c:cb80cf08)
already locked by <NULL>/0. (Not tainted)
[c0120445] panic+0x42/0x1c0
[c015e1e1] vma_prio_tree_insert+017/0x2a
[c01656d3] vma_adjust+0x322/0x556
[c0166f30] split_vma+0xdd/0xf5
[c0167c70] mprotect_fixup+0xf1/0x1ca
[c0167edb] sys_mprotect+0192/0x253
[c010392d] syscall_call+0x7/0xb
This problem occurs in a variable time after boot.
After few hours that pc is turned off.
I already used 80-wire cable and my Maxtor HD plugs are seated properly.
I'm using Kernel 2.6.12-1.1372 on Fedora Core 3
HD is 80 GB Maxtor ATA/133
With hdparm command I can see hda is set in "udma5".
How can I solve it ?
next reply other threads:[~2005-07-29 18:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-24 19:42 Sampei [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-07-29 19:02 DriveStatusError sampei02
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1122234170.2206.49.camel@zio_budda \
--to=sampei02@tiscali.it \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox