Re: TX4000 RAID and sata_promise

[Erik Slagter <erik@slagter.name>]

[-- Attachment #1: Type: text/plain, Size: 1150 bytes --]

On Sun, 2005-08-28 at 17:33 +0400, Yuri Kirsanov wrote:
> Good day. I've tried latest kernel 2.6.13-rc7, TX4000 support seems to
> be in sata_promise already. After startup I see following in dmesg:
> 
> libata version 1.12 loaded.
> sata_promise version 1.02
> PCI: Found IRQ 5 for device 0000:01:09.0
> ata1: PATA max UDMA/133 cmd 0xCC81C200 ctl 0xCC81C238 bmdma 0x0 irq 5
> ata2: PATA max UDMA/133 cmd 0xCC81C280 ctl 0xCC81C2B8 bmdma 0x0 irq 5
> ata3: PATA max UDMA/133 cmd 0xCC81C300 ctl 0xCC81C338 bmdma 0x0 irq 5
> ata4: PATA max UDMA/133 cmd 0xCC81C380 ctl 0xCC81C3B8 bmdma 0x0 irq 5
> ata1: no device found (phy stat 00000000)
> scsi0 : sata_promise
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_promise
> ata3: no device found (phy stat 00000000)
> scsi2 : sata_promise
> ata4: no device found (phy stat 00000000)
> scsi3 : sata_promise
> 
> 
> Anybody has any ideas? As I can see, my TX4000 is found by
> sata_promise, it even detects it's UDMA modes, but it still can't find
> any of my hard drives, while TX4000 BIOS shows all of them ok.

Maybe you have to enable PATA support in include/libata.h?

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]