From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, linux-ide@vger.kernel.org, albertcc@tw.ibm.com
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 11/12] ahci: convert to new reset mechanism
Date: Tue, 24 Jan 2006 17:05:22 +0900 [thread overview]
Message-ID: <1138089922760-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1138089921565-git-send-email-htejun@gmail.com>
Convert ahci ->phy_reset to new reset mechanism.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/ahci.c | 46 +++++++++++++++++++++++++++++-----------------
1 files changed, 29 insertions(+), 17 deletions(-)
73d592b3ebb6520d3f87b1cfcd94c323be2d8889
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 66402ef..c5a1ba6 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -190,7 +190,7 @@ static void ahci_scr_write (struct ata_p
static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
-static void ahci_phy_reset(struct ata_port *ap);
+static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes);
static void ahci_irq_clear(struct ata_port *ap);
static void ahci_eng_timeout(struct ata_port *ap);
static int ahci_port_start(struct ata_port *ap);
@@ -229,7 +229,7 @@ static const struct ata_port_operations
.tf_read = ahci_tf_read,
- .phy_reset = ahci_phy_reset,
+ .probe_reset = ahci_probe_reset,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
@@ -251,8 +251,7 @@ static const struct ata_port_info ahci_p
{
.sht = &ahci_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- ATA_FLAG_PIO_DMA,
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
@@ -511,28 +510,35 @@ static inline void ahci_fill_cmd_slot(st
pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
}
-static void ahci_phy_reset(struct ata_port *ap)
+static int ahci_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
{
- void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
- struct ata_device *dev = &ap->device[0];
- u32 new_tmp, tmp;
+ int rc;
+
+ DPRINTK("ENTER\n");
ahci_stop_engine(ap);
- __sata_phy_reset(ap);
+ rc = sata_std_hardreset(ap, verbose, class);
ahci_start_engine(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
- return;
+ if (rc == 0)
+ *class = ahci_dev_classify(ap);
+ if (*class == ATA_DEV_UNKNOWN)
+ *class = ATA_DEV_NONE;
- dev->class = ahci_dev_classify(ap);
- if (!ata_dev_present(dev)) {
- ata_port_disable(ap);
- return;
- }
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+ return rc;
+}
+
+static void ahci_postreset(struct ata_port *ap, unsigned int *class)
+{
+ void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+ u32 new_tmp, tmp;
+
+ ata_std_postreset(ap, class);
/* Make sure port's ATAPI bit is set appropriately */
new_tmp = tmp = readl(port_mmio + PORT_CMD);
- if (dev->class == ATA_DEV_ATAPI)
+ if (*class == ATA_DEV_ATAPI)
new_tmp |= PORT_CMD_ATAPI;
else
new_tmp &= ~PORT_CMD_ATAPI;
@@ -542,6 +548,12 @@ static void ahci_phy_reset(struct ata_po
}
}
+static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes)
+{
+ return ata_drive_probe_reset(ap, NULL, ahci_hardreset,
+ ahci_postreset, classes);
+}
+
static u8 ahci_check_status(struct ata_port *ap)
{
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
--
1.1.3
next prev parent reply other threads:[~2006-01-24 8:25 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-24 8:05 [PATCHSET] libata: new reset mechanism, take#2 Tejun Heo
2006-01-24 8:05 ` [PATCH 01/12] libata: export ata_busy_sleep Tejun Heo
2006-01-27 4:18 ` Jeff Garzik
2006-01-24 8:05 ` [PATCH 04/12] libata: implement ata_drive_probe_reset() Tejun Heo
2006-01-28 1:58 ` Jeff Garzik
2006-01-24 8:05 ` [PATCH 10/12] ata_piix: convert sata to new reset mechanism Tejun Heo
2006-01-24 8:05 ` [PATCH 02/12] libata: modify ata_dev_try_classify Tejun Heo
2006-01-27 4:20 ` Jeff Garzik
2006-01-24 8:05 ` Tejun Heo [this message]
2006-01-24 8:05 ` [PATCH 07/12] sata_sil24: convert to new reset mechanism Tejun Heo
2006-01-24 8:05 ` [PATCH 08/12] sata_sil24: add hardreset Tejun Heo
2006-01-24 8:05 ` [PATCH 06/12] sata_sil: convert to new reset mechanism Tejun Heo
2006-01-28 18:09 ` Jeff Garzik
2006-01-28 18:27 ` Jeff Garzik
2006-01-28 23:17 ` Tejun
2006-01-29 2:41 ` Jeff Garzik
2006-01-24 8:05 ` [PATCH 03/12] libata: new ->probe_reset operation Tejun Heo
2006-01-24 8:05 ` [PATCH 05/12] libata: implement standard reset component operations and ->probe_reset Tejun Heo
2006-01-28 1:58 ` Jeff Garzik
2006-01-24 8:05 ` [PATCH 09/12] ata_piix: convert pata to new reset mechanism Tejun Heo
2006-01-24 8:05 ` [PATCH 12/12] ahci: add softreset Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1138089922760-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=albertcc@tw.ibm.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).