From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, albertcc@tw.ibm.com, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 08/11] ata_piix: convert pata to new reset mechanism
Date: Thu, 2 Feb 2006 18:20:00 +0900 [thread overview]
Message-ID: <11388720002922-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11388720003793-git-send-email-htejun@gmail.com>
Convert ata_piix pata ->phy_reset to new reset mechanism.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/ata_piix.c | 47 +++++++++++++++++++++++++++++++----------------
1 files changed, 31 insertions(+), 16 deletions(-)
4c83a0664401bd8a04813e810eb1a828f0aeafb2
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 49cc420..f4215c9 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -131,7 +131,7 @@ enum {
static int piix_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
-static void piix_pata_phy_reset(struct ata_port *ap);
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
static void piix_sata_phy_reset(struct ata_port *ap);
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
@@ -207,7 +207,7 @@ static const struct ata_port_operations
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_pata_phy_reset,
+ .probe_reset = piix_pata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -258,8 +258,7 @@ static struct ata_port_info piix_port_in
/* ich5_pata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
- PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
#if 0
.mwdma_mask = 0x06, /* mwdma1-2 */
@@ -284,7 +283,7 @@ static struct ata_port_info piix_port_in
/* piix4_pata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .host_flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
#if 0
.mwdma_mask = 0x06, /* mwdma1-2 */
@@ -366,30 +365,46 @@ cbl40:
}
/**
- * piix_pata_phy_reset - Probe specified port on PATA host controller
- * @ap: Port to probe
+ * piix_pata_postreset - Postreset stuff on PATA host controller
+ * @ap: Target port
+ * @classes: Classes of attached devices
*
- * Probe PATA phy.
+ * Postreset processing including cable detection.
*
* LOCKING:
* None (inherited from caller).
*/
+static void piix_pata_postreset(struct ata_port *ap, unsigned int *classes)
+{
+ piix_pata_cbl_detect(ap);
+ ata_std_postreset(ap, classes);
+}
-static void piix_pata_phy_reset(struct ata_port *ap)
+/**
+ * piix_pata_probe_reset - Perform reset on PATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
+ *
+ * Reset PATA phy and classify attached devices.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
+ int i;
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
- ata_port_disable(ap);
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ classes[i] = ATA_DEV_NONE;
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return;
+ return 0;
}
- piix_pata_cbl_detect(ap);
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ ata_std_softreset, NULL,
+ piix_pata_postreset, classes);
}
/**
--
1.1.3
next prev parent reply other threads:[~2006-02-02 9:20 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-02 9:20 [PATCHSET] libata: [PATCHSET] libata: new reset mechanism, take#3 Tejun Heo
2006-02-02 9:20 ` [PATCH 10/11] ahci: convert to new reset mechanism Tejun Heo
2006-02-02 9:20 ` [PATCH 04/11] libata: implement ata_std_probeinit() Tejun Heo
2006-02-02 9:20 ` [PATCH 09/11] ata_piix: convert sata to new reset mechanism Tejun Heo
2006-02-02 9:20 ` [PATCH 01/11] libata: fix ata_std_probe_reset() SATA detection Tejun Heo
2006-02-09 6:54 ` Jeff Garzik
2006-02-02 9:20 ` [PATCH 07/11] sata_sil24: add hardreset Tejun Heo
2006-02-09 7:08 ` Jeff Garzik
2006-02-02 9:20 ` [PATCH 06/11] sata_sil24: convert to new reset mechanism Tejun Heo
2006-02-02 9:20 ` [PATCH 02/11] libata: separate out sata_phy_resume() from sata_std_hardreset() Tejun Heo
2006-02-02 9:20 ` [PATCH 11/11] ahci: add softreset Tejun Heo
2006-02-02 9:20 ` [PATCH 05/11] sata_sil: convert to new reset mechanism Tejun Heo
2006-02-09 7:05 ` Jeff Garzik
2006-02-02 9:20 ` [PATCH 03/11] libata: add probeinit component operation to ata_drive_probe_reset() Tejun Heo
2006-02-09 7:02 ` Jeff Garzik
2006-02-09 9:39 ` Tejun
2006-02-09 9:42 ` Jeff Garzik
2006-02-02 9:20 ` Tejun Heo [this message]
2006-02-09 7:10 ` [PATCH 08/11] ata_piix: convert pata to new reset mechanism Jeff Garzik
2006-02-09 6:51 ` [PATCHSET] libata: [PATCHSET] libata: new reset mechanism, take#3 Jeff Garzik
2006-02-09 9:20 ` Tejun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11388720002922-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=albertcc@tw.ibm.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).