From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, albertcc@tw.ibm.com, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 3/9] sata_sil: convert to new reset mechanism
Date: Fri, 10 Feb 2006 23:58:48 +0900 [thread overview]
Message-ID: <11395835281210-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11395835282719-git-send-email-htejun@gmail.com>
Convert sata_sil to use new reset mechanism. sata_sil is fairly
generic and can directly use std routine.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/sata_sil.c | 9 ++++-----
1 files changed, 4 insertions(+), 5 deletions(-)
0ae93718b02a7763abfacd0a900b51ba27c6212d
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index f40f25e..bd28877 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -158,7 +158,7 @@ static const struct ata_port_operations
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = sata_phy_reset,
+ .probe_reset = ata_std_probe_reset,
.post_set_mode = sil_post_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -181,7 +181,7 @@ static const struct ata_port_info sil_po
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -190,8 +190,7 @@ static const struct ata_port_info sil_po
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO |
- SIL_FLAG_MOD15WRITE,
+ ATA_FLAG_MMIO | SIL_FLAG_MOD15WRITE,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -200,7 +199,7 @@ static const struct ata_port_info sil_po
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
--
1.1.5
next prev parent reply other threads:[~2006-02-10 14:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-10 14:58 [PATCHSET] libata: various fixes related to EH, take #4 Tejun Heo
2006-02-10 14:58 ` [PATCH 7/9] ata_piix: convert sata to new reset mechanism Tejun Heo
2006-02-11 23:30 ` Jeff Garzik
2006-02-10 14:58 ` [PATCH 5/9] sata_sil24: add hardreset Tejun Heo
2006-02-10 14:58 ` [PATCH 1/9] libata: make new reset act identical to ->phy_reset register-wise Tejun Heo
2006-02-10 15:30 ` Jeff Garzik
2006-02-10 14:58 ` Tejun Heo [this message]
2006-02-10 14:58 ` [PATCH 6/9] ata_piix: convert pata to new reset mechanism Tejun Heo
2006-02-11 23:29 ` Jeff Garzik
2006-02-10 14:58 ` [PATCH 4/9] sata_sil24: convert " Tejun Heo
2006-02-10 14:58 ` [PATCH 2/9] libata: kill SError clearing in sata_std_hardreset() Tejun Heo
2006-02-10 14:58 ` [PATCH 9/9] ahci: add softreset Tejun Heo
2006-02-10 14:58 ` [PATCH 8/9] ahci: convert to new reset mechanism Tejun Heo
2006-02-10 15:01 ` Sorry, wrong PATCHSET name, it should be [PATCHSET] libata: various fixes related to EH, take #4 Tejun Heo
2006-02-10 15:04 ` Gee, wrong again. libata: [PATCHSET] libata: new reset mechanism, take#4 Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11395835281210-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=albertcc@tw.ibm.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).