From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: [PATCH 2/3] ata_piix: convert pata to new reset mechanism Date: Wed, 15 Feb 2006 15:01:42 +0900 Message-ID: <11399833023925-git-send-email-htejun@gmail.com> References: <11399833022059-git-send-email-htejun@gmail.com> Reply-To: Tejun Heo Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: Received: from pproxy.gmail.com ([64.233.166.176]:7991 "EHLO pproxy.gmail.com") by vger.kernel.org with ESMTP id S1422994AbWBOGBs (ORCPT ); Wed, 15 Feb 2006 01:01:48 -0500 Received: by pproxy.gmail.com with SMTP id w49so1416416pyg for ; Tue, 14 Feb 2006 22:01:46 -0800 (PST) In-Reply-To: <11399833022059-git-send-email-htejun@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: jgarzik@pobox.com, linux-ide@vger.kernel.org Cc: Tejun Heo Convert ata_piix pata ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo --- drivers/scsi/ata_piix.c | 43 +++++++++++++++++++++++++++---------------- 1 files changed, 27 insertions(+), 16 deletions(-) 79d2bec55755a2941f289a3e0fad5d5922fd00b4 diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 4cc1108..d79c252 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -131,7 +131,7 @@ enum { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void piix_pata_phy_reset(struct ata_port *ap); +static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes); static void piix_sata_phy_reset(struct ata_port *ap); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); @@ -207,7 +207,7 @@ static const struct ata_port_operations .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = piix_pata_phy_reset, + .probe_reset = piix_pata_probe_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -258,8 +258,7 @@ static struct ata_port_info piix_port_in /* ich5_pata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ #if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -284,7 +283,7 @@ static struct ata_port_info piix_port_in /* piix4_pata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .host_flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ #if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -366,30 +365,42 @@ cbl40: } /** - * piix_pata_phy_reset - Probe specified port on PATA host controller - * @ap: Port to probe + * piix_pata_probeinit - probeinit for PATA host controller + * @ap: Target port * - * Probe PATA phy. + * Probeinit including cable detection. * * LOCKING: * None (inherited from caller). */ +static void piix_pata_probeinit(struct ata_port *ap) +{ + piix_pata_cbl_detect(ap); + ata_std_probeinit(ap); +} -static void piix_pata_phy_reset(struct ata_port *ap) +/** + * piix_pata_probe_reset - Perform reset on PATA port and classify + * @ap: Port to reset + * @classes: Resulting classes of attached devices + * + * Reset PATA phy and classify attached devices. + * + * LOCKING: + * None (inherited from caller). + */ +static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { - ata_port_disable(ap); printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); - return; + return 0; } - piix_pata_cbl_detect(ap); - - ata_port_probe(ap); - - ata_bus_reset(ap); + return ata_drive_probe_reset(ap, piix_pata_probeinit, + ata_std_softreset, NULL, + ata_std_postreset, classes); } /** -- 1.1.5