From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: "Dr. David Alan Gilbert" <linux@treblig.org>
Cc: Mark Lord <liml@rtr.ca>,
James Courtier-Dutton <James@superbug.co.uk>,
David Greaves <david@dgreaves.com>,
Justin Piszcz <jpiszcz@lucidpixels.com>,
Jeff Garzik <jgarzik@pobox.com>,
linux-kernel@vger.kernel.org,
IDE/ATA development list <linux-ide@vger.kernel.org>,
albertcc@tw.ibm.com, axboe@suse.de, htejun@gmail.com
Subject: Re: Kernel SeekCompleteErrors... Different from Re: LibPATA code issues / 2.6.15.4
Date: Sun, 26 Feb 2006 17:43:11 +0000 [thread overview]
Message-ID: <1140975791.27539.19.camel@localhost.localdomain> (raw)
In-Reply-To: <20060226171307.GA9682@gallifrey>
On Sul, 2006-02-26 at 17:13 +0000, Dr. David Alan Gilbert wrote:
> > The *only* test that matters is to enable S.M.A.R.T.,
> > and read out the error logs from it.
SMART is unreliable for many cases
> I have seen a set of drives that has reported UncorrectableErrors
> and :
> * Shows the Uncorrectable error in the SMART log
> * Passes a full SMART test
> * Shows no remapped sectors
> * Passes the vendors drive test
> * Now fully passes a dd if=/dev/hdx of=/dev/null with no errors.
The very early SATA code didnt decode the errors from the drive fully so
could produce bogus reports. The current code decodes it and also
displays the ATA level diagnostics so should be reliable.
next prev parent reply other threads:[~2006-02-26 17:41 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.64.0602140439580.3567@p34>
2006-02-14 14:50 ` LibPATA code issues / 2.6.15.4 Mark Lord
2006-02-14 16:27 ` David Greaves
2006-02-14 17:12 ` Justin Piszcz
2006-02-14 18:00 ` Mark Lord
2006-02-14 18:06 ` Justin Piszcz
2006-02-23 23:39 ` Justin Piszcz
2006-02-25 15:32 ` Mark Lord
2006-02-25 15:58 ` Justin Piszcz
2006-02-25 16:11 ` Jesper Juhl
2006-02-25 16:21 ` Mark Lord
2006-02-25 11:34 ` David Greaves
2006-02-25 16:20 ` Mark Lord
2006-02-25 17:45 ` Justin Piszcz
2006-02-25 18:28 ` Mark Lord
2006-02-25 18:55 ` Justin Piszcz
2006-02-25 19:29 ` Justin Piszcz
2006-02-25 19:53 ` David Greaves
2006-02-25 19:47 ` David Greaves
2006-02-26 2:27 ` Mark Lord
2006-02-26 9:56 ` David Greaves
2006-02-26 14:04 ` Mark Lord
2006-02-27 21:34 ` Mark Lord
2006-02-28 1:33 ` Tejun Heo
2006-02-28 1:46 ` Linus Torvalds
2006-02-28 2:07 ` Jeff Garzik
2006-02-28 2:14 ` Linus Torvalds
2006-02-28 2:52 ` Jeff Garzik
2006-02-28 3:36 ` Jeff Garzik
2006-02-28 4:11 ` Mark Lord
2006-02-28 10:30 ` Alan Cox
2006-02-28 8:03 ` Jens Axboe
2006-02-28 4:16 ` Mark Lord
2006-02-28 10:32 ` Alan Cox
2006-02-28 10:30 ` Justin Piszcz
2006-02-28 10:39 ` David Greaves
2006-02-28 14:37 ` Mark Lord
2006-02-28 21:04 ` Bill Davidsen
2006-03-08 2:57 ` Mark Lord
2006-03-08 3:18 ` Dave Jones
2006-03-08 3:23 ` Mark Lord
2006-03-08 15:37 ` Bill Davidsen
2006-02-28 14:38 ` Mark Lord
[not found] ` <Pine.LNX.4.64.0602280939280.16541@p34>
2006-02-28 14:49 ` Mark Lord
2006-02-28 15:07 ` Jeff Garzik
2006-02-28 15:26 ` Mark Lord
2006-02-28 15:33 ` Jeff Garzik
2006-03-01 0:46 ` Mark Lord
2006-03-01 6:01 ` Jeff Garzik
2006-02-28 15:16 ` Alan Cox
2006-03-01 17:33 ` David Greaves
2006-03-01 18:37 ` Alan Cox
2006-03-01 20:12 ` Phillip Susi
2006-03-08 16:46 ` Alan Cox
2006-02-28 15:31 ` Mark Lord
2006-02-28 15:34 ` Jeff Garzik
2006-02-28 16:57 ` Eric D. Mudama
2006-03-01 1:04 ` Mark Lord
2006-03-01 11:37 ` Justin Piszcz
2006-03-01 13:17 ` Justin Piszcz
2006-03-01 17:41 ` David Greaves
2006-03-01 17:46 ` Mark Lord
2006-03-01 18:12 ` David Greaves
2006-03-01 18:30 ` Mark Lord
2006-03-01 18:32 ` Justin Piszcz
2006-03-01 18:33 ` Justin Piszcz
2006-03-01 18:48 ` David Greaves
2006-03-01 19:49 ` David Greaves
2006-03-03 19:38 ` Justin Piszcz
2006-03-03 22:46 ` David Greaves
2006-03-04 14:25 ` Mark Lord
2006-03-06 6:13 ` David Greaves
2006-03-21 18:11 ` David Greaves
2006-03-22 15:23 ` David Greaves
2006-03-05 11:43 ` Justin Piszcz
2006-03-05 12:41 ` Justin Piszcz
2006-03-05 22:58 ` Mark Lord
2006-03-05 23:00 ` Mark Lord
2006-03-05 23:19 ` Justin Piszcz
2006-03-05 23:39 ` Jeff Garzik
2006-04-21 19:14 ` LibPATA code issues / 2.6.16 (previously, 2.6.15.x) Justin Piszcz
2006-04-21 19:18 ` Jeff Garzik
2006-04-21 19:28 ` Linus Torvalds
2006-04-21 22:46 ` Jeff Garzik
2006-04-22 0:05 ` Linus Torvalds
2006-05-06 15:09 ` [smartmontools-support]Re: " Leon Woestenberg
2006-05-07 12:44 ` Ingo Oeser
2006-06-11 11:13 ` Justin Piszcz
2006-04-22 16:39 ` Justin Piszcz
2006-03-01 19:06 ` LibPATA code issues / 2.6.15.4 Justin Piszcz
2006-03-01 19:28 ` Mark Lord
2006-03-01 19:35 ` Mark Lord
2006-03-01 19:38 ` Justin Piszcz
2006-03-01 19:41 ` Jeff Garzik
2006-02-26 12:27 ` James Courtier-Dutton
2006-02-26 12:55 ` David Greaves
2006-02-26 13:56 ` Mark Lord
2006-02-26 14:30 ` Kernel SeekCompleteErrors... Different from " James Courtier-Dutton
2006-02-26 17:03 ` Mark Lord
2006-02-26 17:13 ` Dr. David Alan Gilbert
2006-02-26 17:43 ` Alan Cox [this message]
2006-02-26 20:36 ` Mark Lord
2006-02-27 11:48 ` Alan Cox
2006-02-27 13:40 ` Mark Lord
2006-02-14 23:58 ` Justin Piszcz
2006-02-17 8:45 ` Jeff Garzik
2006-02-17 14:59 ` Mark Lord
2006-02-17 15:00 ` Justin Piszcz
2006-02-18 20:43 ` Sander
2006-02-18 21:42 ` Mark Lord
2006-02-18 21:51 ` Justin Piszcz
2006-02-19 7:14 ` Sander
2006-02-19 15:30 ` Mark Lord
2006-02-19 17:16 ` Sander
2006-07-06 23:08 ` Justin Piszcz
2006-07-07 13:08 ` Mark Lord
2006-07-07 13:24 ` Justin Piszcz
2006-07-07 13:43 ` Mark Lord
2006-07-07 13:48 ` Justin Piszcz
2006-07-07 14:01 ` Justin Piszcz
2006-07-07 14:35 ` Justin Piszcz
2006-07-07 18:53 ` Justin Piszcz
2006-07-07 19:19 ` Jeff Garzik
2006-07-07 19:28 ` Justin Piszcz
[not found] ` <200607091224.31451.liml@rtr.ca>
2006-07-09 17:27 ` Justin Piszcz
2006-07-09 20:16 ` Justin Piszcz
2006-07-09 20:40 ` LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Justin Piszcz
2006-07-09 20:46 ` Justin Piszcz
2006-07-09 21:05 ` Justin Piszcz
2006-07-09 22:03 ` Justin Piszcz
2006-07-10 13:59 ` Follow up? " Justin Piszcz
2006-07-10 15:33 ` Alan Cox
2006-07-10 15:45 ` Justin Piszcz
2006-07-11 13:28 ` LibPATA code issues / 2.6.17.3 (What is the next step?) Justin Piszcz
2006-07-11 16:12 ` Alan Cox
2006-07-12 22:10 ` David Greaves
2006-07-12 22:29 ` Justin Piszcz
2006-07-14 15:33 ` David Greaves
2006-07-13 10:55 ` Erik Mouw
2006-07-14 17:16 ` Mark Lord
2006-07-14 17:18 ` Justin Piszcz
2006-07-14 17:39 ` Mark Lord
2006-07-14 18:18 ` Justin Piszcz
2006-07-14 20:02 ` Mark Lord
2006-07-14 17:14 ` Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)! Mark Lord
2006-07-14 17:17 ` Justin Piszcz
2006-07-14 17:37 ` Mark Lord
2006-07-14 18:17 ` Justin Piszcz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1140975791.27539.19.camel@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=James@superbug.co.uk \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=david@dgreaves.com \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=jpiszcz@lucidpixels.com \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@treblig.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox