From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, albertcc@tw.ibm.com,
linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 12/15] libata: use SATA speeding down in ata_drive_probe_reset()
Date: Sat, 1 Apr 2006 01:38:19 +0900 [thread overview]
Message-ID: <11438230992911-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1143823097579-git-send-email-htejun@gmail.com>
Make ata_drive_probe_reset() use SATA SPD configuration. Hardreset
will be force if speed renegotiation is necessary. Also, if a
hardreset fails, PHY speed is stepped down and hardreset is retried
until the lowest speed is reached.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 17 +++++++++++++----
1 files changed, 13 insertions(+), 4 deletions(-)
c927e2f9d4688d9d34e7d1d5f7f2e34e86e93827
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 16095d8..30ee203 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2629,7 +2629,7 @@ int ata_drive_probe_reset(struct ata_por
if (probeinit)
probeinit(ap);
- if (softreset) {
+ if (softreset && !ata_set_sata_spd_needed(ap, &ap->device[0])) {
rc = ata_do_reset(ap, softreset, postreset, 0, classes);
if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
goto done;
@@ -2638,9 +2638,18 @@ int ata_drive_probe_reset(struct ata_por
if (!hardreset)
goto done;
- rc = ata_do_reset(ap, hardreset, postreset, 0, classes);
- if (rc || classes[0] != ATA_DEV_UNKNOWN)
- goto done;
+ while (1) {
+ ata_set_sata_spd(ap, &ap->device[0]);
+ rc = ata_do_reset(ap, hardreset, postreset, 0, classes);
+ if (rc == 0) {
+ if (classes[0] != ATA_DEV_UNKNOWN)
+ goto done;
+ break;
+ }
+
+ if (ata_down_sata_spd_limit(ap, &ap->device[0]))
+ goto done;
+ }
if (softreset)
rc = ata_do_reset(ap, softreset, postreset, 0, classes);
--
1.2.4
next prev parent reply other threads:[~2006-03-31 16:38 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-31 16:38 [PATCHSET] libata: improve ata_bus_probe failure handling Tejun Heo
2006-03-31 16:38 ` [PATCH 01/15] libata: fix ata_set_mode() return value Tejun Heo
2006-04-01 17:34 ` Jeff Garzik
2006-03-31 16:38 ` [PATCH 03/15] libata: separate out ata_spd_string() Tejun Heo
2006-03-31 16:38 ` [PATCH 04/15] libata: convert do_probe_reset() to ata_do_reset() Tejun Heo
2006-03-31 16:38 ` [PATCH 02/15] libata: make ata_bus_probe() return negative errno on failure Tejun Heo
2006-03-31 16:38 ` [PATCH 10/15] libata: add dev->sata_spd_limit and helpers Tejun Heo
2006-04-01 19:51 ` Jeff Garzik
2006-04-02 1:00 ` Tejun Heo
2006-04-02 8:12 ` Jeff Garzik
2006-03-31 16:38 ` [PATCH 11/15] libata: preserve SATA SPD setting over hard resets Tejun Heo
2006-04-01 19:52 ` Jeff Garzik
2006-03-31 16:38 ` [PATCH 09/15] libata: implement ata_down_xfermask_limit() Tejun Heo
2006-03-31 22:31 ` Alan Cox
2006-04-01 0:11 ` Tejun Heo
2006-04-01 19:47 ` Jeff Garzik
2006-04-02 0:55 ` Tejun Heo
2006-04-02 6:58 ` Tejun Heo
2006-04-02 8:07 ` Jeff Garzik
2006-03-31 16:38 ` [PATCH 07/15] libata: reorganize ata_set_mode() Tejun Heo
2006-03-31 16:38 ` [PATCH 06/15] libata: make ata_set_mode() handle no-device case properly Tejun Heo
2006-03-31 16:38 ` [PATCH 05/15] libata: implement ata_dev_enabled and disabled() Tejun Heo
2006-04-01 17:29 ` Jeff Garzik
2006-04-02 0:54 ` Tejun Heo
2006-03-31 16:38 ` [PATCH 08/15] libata: don't disable devices from ata_set_mode() Tejun Heo
2006-04-01 19:46 ` Jeff Garzik
2006-03-31 16:38 ` Tejun Heo [this message]
2006-04-01 19:56 ` [PATCH 12/15] libata: use SATA speeding down in ata_drive_probe_reset() Jeff Garzik
2006-04-02 1:05 ` Tejun Heo
2006-03-31 16:38 ` [PATCH 13/15] libata: add 1s sleep between resets Tejun Heo
2006-04-01 19:57 ` Jeff Garzik
2006-04-02 1:07 ` Tejun Heo
2006-03-31 16:38 ` [PATCH 14/15] libata: improve ata_bus_probe() Tejun Heo
2006-04-01 19:58 ` Jeff Garzik
2006-03-31 16:38 ` [PATCH 15/15] libata: consider disabled devices in ata_dev_xfermask() Tejun Heo
2006-04-01 20:00 ` Jeff Garzik
2006-04-02 1:09 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11438230992911-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertcc@tw.ibm.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).