From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: [PATCH 11/14] libata: clean up AHCI constants in preparation for NCQ Date: Mon, 3 Apr 2006 17:32:40 +0900 Message-ID: <11440531601152-git-send-email-htejun@gmail.com> References: <1144053158183-git-send-email-htejun@gmail.com> Reply-To: Tejun Heo Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: Received: from wproxy.gmail.com ([64.233.184.224]:59876 "EHLO wproxy.gmail.com") by vger.kernel.org with ESMTP id S1751655AbWDCIcx (ORCPT ); Mon, 3 Apr 2006 04:32:53 -0400 Received: by wproxy.gmail.com with SMTP id i22so1247732wra for ; Mon, 03 Apr 2006 01:32:53 -0700 (PDT) In-Reply-To: <1144053158183-git-send-email-htejun@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, albertcc@tw.ibm.com, axboe@suse.de, linux-ide@vger.kernel.org Cc: Tejun Heo * Rename CMD_TBL_HDR to CMD_TBL_HDR_SZ as it's size not offset. * Define MAX_CMDS and CMD_SZ and use them in calculation of other constants. * Define CMD_TBL_AR_SZ as product of CMD_TBL_SZ and MAX_CMDS, and use it when calculating PRIV_DMA_SZ. * CMD_SLOT_SZ is also dependent on MAX_CMDS but hasn't been changed because I didn't want to change the value used by the original code (32 commands). Later NCQ change will bump MAX_CMDS to 32 anyway and the hard coded 32 can be changed to MAX_CMDS then. * Reorder HOST_CAP_* flags. Signed-off-by: Tejun Heo --- drivers/scsi/ahci.c | 15 +++++++++------ 1 files changed, 9 insertions(+), 6 deletions(-) 82ed365bb9a6628a1fbf1a2d3bba240dc5a88069 diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 3dad10f..c01e58a 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -56,12 +56,15 @@ enum { AHCI_MAX_SG = 168, /* hardware max is 64K */ AHCI_DMA_BOUNDARY = 0xffffffff, AHCI_USE_CLUSTERING = 0, - AHCI_CMD_SLOT_SZ = 32 * 32, + AHCI_MAX_CMDS = 1, + AHCI_CMD_SZ = 32, + AHCI_CMD_SLOT_SZ = 32 * AHCI_CMD_SZ, AHCI_RX_FIS_SZ = 256, - AHCI_CMD_TBL_HDR = 0x80, AHCI_CMD_TBL_CDB = 0x40, - AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16), - AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ + + AHCI_CMD_TBL_HDR_SZ = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), + AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ, AHCI_IRQ_ON_SG = (1 << 31), AHCI_CMD_ATAPI = (1 << 5), @@ -88,8 +91,8 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -381,7 +384,7 @@ static int ahci_port_start(struct ata_po pp->cmd_tbl = mem; pp->cmd_tbl_dma = mem_dma; - pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR; + pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR_SZ; ap->private_data = pp; -- 1.2.4