From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, axboe@suse.de,
albertcc@tw.ibm.com, forrest.zhao@intel.com, efalk@google.com,
linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 03/14] libata-hp-prep: make some ata_device fields persistent
Date: Fri, 12 May 2006 00:11:59 +0900 [thread overview]
Message-ID: <11473603182049-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1147360318920-git-send-email-htejun@gmail.com>
Lifetimes of some fields span over device plugging/unplugging. This
patch moves such persistent fields to the top of ata_device and
separate them with ATA_DEVICE_CLEAR_OFFSET. Fields above the offset
are initialized once during host initializatino while all other fields
are cleared before hotplugging. Currently ->ap, devno and part of
flags are persistent.
Note that flags is partially cleared while holding host_set lock.
This is to synchronize with later warm plug implementation which will
record hotplug request in dev->flags.
---
drivers/scsi/libata-core.c | 14 ++++++++++++--
include/linux/libata.h | 8 ++++++--
2 files changed, 18 insertions(+), 4 deletions(-)
480d38b7f94a98fe9c9b33db932d94652cfed779
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d307164..6accef3 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5119,9 +5119,18 @@ static void ata_host_remove(struct ata_p
void ata_dev_init(struct ata_device *dev)
{
struct ata_port *ap = dev->ap;
+ unsigned long flags;
+
+ /* High bits of dev->flags are used to record warm plug
+ * requests which occur asynchronously. Synchronize using
+ * host_set lock.
+ */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ dev->flags &= ~ATA_DFLAG_INIT_MASK;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
- memset((void *)dev, 0, sizeof(*dev));
- dev->devno = dev - ap->device;
+ memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
+ sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
dev->udma_mask = UINT_MAX;
@@ -5183,6 +5192,7 @@ static void ata_host_init(struct ata_por
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
dev->ap = ap;
+ dev->devno = i;
ata_dev_init(dev);
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 1f6e48e..99a78cf 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -129,6 +129,7 @@ enum {
ATA_DFLAG_CFG_MASK = (1 << 8) - 1,
ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */
+ ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
ATA_DFLAG_DETACHED = (1 << 17),
@@ -408,10 +409,11 @@ struct ata_ering {
struct ata_device {
struct ata_port *ap;
- u64 n_sectors; /* size of device, if ATA */
+ unsigned int devno; /* 0 or 1 */
unsigned long flags; /* ATA_DFLAG_xxx */
+ /* fields above n_sectors are not cleared across device init */
+ u64 n_sectors; /* size of device, if ATA */
unsigned int class; /* ATA_DEV_xxx */
- unsigned int devno; /* 0 or 1 */
u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
u8 pio_mode;
u8 dma_mode;
@@ -436,6 +438,8 @@ struct ata_device {
DEFINE_ATA_ERING (ering, ATA_DEV_ERING_SIZE);
};
+#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors)
+
struct ata_eh_info {
struct ata_device *dev; /* offending device */
u32 serror; /* SError from LLDD */
--
1.2.4
next prev parent reply other threads:[~2006-05-11 15:12 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-11 15:11 [PATCHSET 07/11] prep LLDDs for hotplug support, take 1 Tejun Heo
2006-05-11 15:11 ` [PATCH 02/14] libata-hp-prep: implement ata_dev_init() Tejun Heo
2006-05-11 15:11 ` [PATCH 2/6] sata_sil: add new constants in preparation for new interrupt handler Tejun Heo
2006-05-11 15:11 ` [PATCH 01/14] libata-hp-prep: add flags and eh_info/context fields for hotplug Tejun Heo
2006-05-11 15:11 ` [PATCH 1/6] libata: export ata_hsm_move() Tejun Heo
2006-05-11 15:11 ` [PATCH 4/6] sata_sil24: rename PORT_PRB to PORT_LRAM and add PORT_LRAM_SLOT_SZ Tejun Heo
2006-05-11 15:11 ` [PATCH 09/14] libata-hp-prep: make probing related functions global Tejun Heo
2006-05-11 15:11 ` [PATCH 3/6] sata_sil: new interrupt handler Tejun Heo
2006-05-11 15:11 ` [PATCH 04/14] libata-hp-prep: update ata_scsi_find_dev() and friends Tejun Heo
2006-05-11 15:11 ` [PATCH 6/6] sata_sil24: kill ops->tf_read() and use ata_std_noop_check_status() Tejun Heo
2006-05-11 15:11 ` [PATCH 07/14] libata-hp-prep: store attached SCSI device Tejun Heo
2006-05-11 15:11 ` [PATCH 06/14] libata-hp-prep: implement ap->hw_sata_spd_limit Tejun Heo
2006-05-11 15:11 ` Tejun Heo [this message]
2006-05-11 15:11 ` [PATCH 5/6] sata_sil24: use sata_phy_debounce() in sil24_hardreset() Tejun Heo
2006-05-11 15:11 ` [PATCH 08/14] libata-hp-prep: add ata_hotplug_wq Tejun Heo
2006-05-11 15:11 ` [PATCH 10/14] libata-hp-prep: implement sata_phy_debounce() Tejun Heo
2006-05-11 15:11 ` [PATCH 05/14] libata-hp-prep: use __ata_scsi_find_dev() Tejun Heo
2006-05-11 15:12 ` [PATCH 11/14] libata-hp-prep: make ops->tf_read() optional Tejun Heo
2006-05-11 15:12 ` [PATCH 12/14] libata-hp-prep: implement ata_noop_check_status() Tejun Heo
2006-05-11 15:12 ` [PATCH 13/14] libata-hp-prep: add prereset() method and implement ata_std_prereset() Tejun Heo
2006-05-11 15:12 ` [PATCH 14/14] libata-hp-prep: implement followup softreset handling Tejun Heo
2006-05-11 15:14 ` THIS THREAD IS MESSED UP, PLEASE IGNORE Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2006-05-19 13:16 [PATCHSET 01/03] prep for hotplug support, take 3 Tejun Heo
2006-05-19 13:16 ` [PATCH 03/14] libata-hp-prep: make some ata_device fields persistent Tejun Heo
2006-05-19 15:00 ` Jeff Garzik
2006-05-19 13:06 [PATCH 02/14] libata-hp-prep: implement ata_dev_init() Tejun Heo
2006-05-19 13:06 ` [PATCH 03/14] libata-hp-prep: make some ata_device fields persistent Tejun Heo
2006-05-11 15:02 [PATCHSET 06/11] prep for hotplug support, take 2 Tejun Heo
2006-05-11 15:02 ` [PATCH 03/14] libata-hp-prep: make some ata_device fields persistent Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11473603182049-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=efalk@google.com \
--cc=forrest.zhao@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).