From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, axboe@suse.de,
albertcc@tw.ibm.com, forrest.zhao@intel.com, efalk@google.com,
linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 13/14] libata-link: update EH to deal with PM links
Date: Fri, 12 May 2006 01:30:23 +0900 [thread overview]
Message-ID: <11473650233229-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11473650221713-git-send-email-htejun@gmail.com>
Update ata_eh_autopsy(), ata_eh_report() and ata_eh_recover() to deal
with PM links. ata_eh_autopsy() and ata_eh_report() updates are
straightforward. They just repeat the same operation over all
configured links.
ata_eh_recover() update is more complex as it first processes all
resets and then performs the rest. This is necessary as thawing with
some links in unknown state can be dangerous. ehi->action is cleared
on successful recovery of a link to avoid repeating recovery due to
failures in other links.
ata_eh_recover() iterates over only PM links if PM is attached, and,
on failure, the failing link is returned in @failed_link instead of
disabling devices directly. These are to integrate ata_eh_recover()
into PM EH later.
---
drivers/scsi/libata-eh.c | 192 ++++++++++++++++++++++++++++++++--------------
1 files changed, 135 insertions(+), 57 deletions(-)
e76a448cb0f33855cd17ee65f4a5f5b83e6962af
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index 8e89379..24b5dc8 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -1196,8 +1196,8 @@ static int ata_eh_speed_down(struct ata_
}
/**
- * ata_eh_autopsy - analyze error and determine recovery action
- * @link: ATA link to perform autopsy on
+ * ata_eh_link_autopsy - analyze error and determine recovery action
+ * @link: host link to perform autopsy on
*
* Analyze why @link failed and determine which recovery actions
* are needed. This function also sets more detailed AC_ERR_*
@@ -1206,7 +1206,7 @@ static int ata_eh_speed_down(struct ata_
* LOCKING:
* Kernel thread context (may sleep).
*/
-static void ata_eh_autopsy(struct ata_link *link)
+static void ata_eh_link_autopsy(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
@@ -1287,7 +1287,25 @@ static void ata_eh_autopsy(struct ata_li
}
/**
- * ata_eh_report - report error handling to user
+ * ata_eh_autopsy - analyze error and determine recovery action
+ * @ap: host port to perform autopsy on
+ *
+ * Analyze all links of @ap and determine why they failed and
+ * which recovery actions are needed.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_eh_autopsy(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ __ata_port_for_each_link(link, ap)
+ ata_eh_link_autopsy(link);
+}
+
+/**
+ * ata_eh_link_report - report error handling to user
* @link: ATA link EH is going on
*
* Report EH to user.
@@ -1295,7 +1313,7 @@ static void ata_eh_autopsy(struct ata_li
* LOCKING:
* None.
*/
-static void ata_eh_report(struct ata_link *link)
+static void ata_eh_link_report(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
@@ -1355,6 +1373,23 @@ static void ata_eh_report(struct ata_lin
}
}
+/**
+ * ata_eh_report - report error handling to user
+ * @ap: ATA port to report EH about
+ *
+ * Report EH to user.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_eh_report(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ __ata_port_for_each_link(link, ap)
+ ata_eh_link_report(link);
+}
+
static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
unsigned int *classes)
{
@@ -1615,12 +1650,13 @@ static int ata_eh_skip_recovery(struct a
* @softreset: softreset method (can be NULL)
* @hardreset: hardreset method (can be NULL)
* @postreset: postreset method (can be NULL)
+ * @r_failed_link: out parameter for failed link
*
* This is the alpha and omega, eum and yang, heart and soul of
* libata exception handling. On entry, actions required to
- * recover the port and hotplug requests are recorded in
- * eh_context. This function executes all the operations with
- * appropriate retrials and fallbacks to resurrect failed
+ * recover each link and hotplug requests are recorded in the
+ * link's eh_context. This function executes all the operations
+ * with appropriate retrials and fallbacks to resurrect failed
* devices, detach goners and greet newcomers.
*
* LOCKING:
@@ -1631,71 +1667,106 @@ static int ata_eh_skip_recovery(struct a
*/
static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
- ata_postreset_fn_t postreset)
+ ata_postreset_fn_t postreset,
+ struct ata_link **r_failed_link)
{
- struct ata_link *link = &ap->link;
- struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_link *link;
+ struct ata_eh_context *ehc;
struct ata_device *dev;
- int down_xfermask, rc;
+ int down_xfermask, reset, rc;
DPRINTK("ENTER\n");
/* prep for recovery */
- ata_link_for_each_dev(dev, link) {
- ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+ ata_port_for_each_link(link, ap) {
+ ehc = &link->eh_context;
- /* process hotplug request */
- if (dev->flags & ATA_DFLAG_DETACH)
- ata_eh_detach_dev(dev);
+ ata_link_for_each_dev(dev, link) {
+ ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
- if (!ata_dev_enabled(dev) &&
- (ehc->i.probe_mask & (1 << dev->devno) &&
- !(ehc->did_probe_mask & (1 << dev->devno)))) {
- ata_eh_detach_dev(dev);
- ata_dev_init(dev);
- ehc->did_probe_mask |= (1 << dev->devno);
- ehc->i.action |= ATA_EH_SOFTRESET;
+ /* process hotplug request */
+ if (dev->flags & ATA_DFLAG_DETACH)
+ ata_eh_detach_dev(dev);
+
+ if (!ata_dev_enabled(dev) &&
+ (ehc->i.probe_mask & (1 << dev->devno) &&
+ !(ehc->did_probe_mask & (1 << dev->devno)))) {
+ ata_eh_detach_dev(dev);
+ ata_dev_init(dev);
+ ehc->did_probe_mask |= (1 << dev->devno);
+ ehc->i.action |= ATA_EH_SOFTRESET;
+ }
}
}
retry:
down_xfermask = 0;
rc = 0;
+ reset = 0;
- /* skip EH if possible. */
- if (ata_eh_skip_recovery(link))
- ehc->i.action = 0;
+ /* do we need to reset? */
+ ata_port_for_each_link(link, ap) {
+ ehc = &link->eh_context;
- ata_link_for_each_dev(dev, link)
- ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
+ /* skip EH if possible. */
+ if (ata_eh_skip_recovery(link))
+ ehc->i.action = 0;
+
+ if (ehc->i.action & ATA_EH_RESET_MASK)
+ reset = 1;
+ }
+
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link) {
+ ehc = &link->eh_context;
+ ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
+ }
+ }
/* reset */
- if (ehc->i.action & ATA_EH_RESET_MASK) {
- ata_eh_freeze_port(ap);
+ if (reset) {
+ __ata_port_freeze(ap);
- rc = ata_eh_reset(link, ata_link_nr_vacant(ap), prereset,
- softreset, hardreset, postreset);
- if (rc) {
- ata_port_printk(ap, KERN_ERR,
- "reset failed, giving up\n");
- goto out;
+ ata_port_for_each_link(link, ap) {
+ ehc = &link->eh_context;
+
+ if (!(ehc->i.action & ATA_EH_RESET_MASK))
+ continue;
+
+ rc = ata_eh_reset(link, ata_link_nr_vacant(link),
+ prereset, softreset, hardreset,
+ postreset);
+ if (rc) {
+ ata_link_printk(link, KERN_ERR,
+ "reset failed, giving up\n");
+ goto out;
+ }
}
ata_eh_thaw_port(ap);
}
- /* revalidate existing devices and attach new ones */
- rc = ata_eh_revalidate_and_attach(link, &dev);
- if (rc)
- goto dev_fail;
-
- /* configure transfer mode if the port has been reset */
- if (ehc->flags & ATA_EHC_DID_RESET) {
- rc = ata_set_mode(link, &dev);
- if (rc) {
- down_xfermask = 1;
+ /* the rest */
+ ata_port_for_each_link(link, ap) {
+ ehc = &link->eh_context;
+
+ /* revalidate existing devices and attach new ones */
+ rc = ata_eh_revalidate_and_attach(link, &dev);
+ if (rc)
goto dev_fail;
+
+ /* configure transfer mode if the port has been reset */
+ if (ehc->flags & ATA_EHC_DID_RESET) {
+ rc = ata_set_mode(link, &dev);
+ if (rc) {
+ down_xfermask = 1;
+ goto dev_fail;
+ }
}
+
+ /* this link is okay now */
+ ehc->flags &= ~ATA_EHC_DID_RESET;
+ ehc->i.action = 0;
}
goto out;
@@ -1718,7 +1789,7 @@ static int ata_eh_recover(struct ata_por
}
if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
- /* disable device if it has used up all its chances */
+ /* the device has used all its chances, disable */
ata_dev_disable(dev);
/* detach if offline */
@@ -1743,8 +1814,8 @@ static int ata_eh_recover(struct ata_por
ehc->i.action |= ATA_EH_SOFTRESET;
}
- if (ata_link_nr_enabled(ap)) {
- ata_port_printk(ap, KERN_WARNING, "failed to recover some "
+ if (ata_link_nr_enabled(link)) {
+ ata_link_printk(link, KERN_WARNING, "failed to recover some "
"devices, retrying in 5 secs\n");
ssleep(5);
} else {
@@ -1755,10 +1826,8 @@ static int ata_eh_recover(struct ata_por
goto retry;
out:
- if (rc) {
- ata_link_for_each_dev(dev, link)
- ata_dev_disable(dev);
- }
+ if (rc && r_failed_link)
+ *r_failed_link = link;
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
@@ -1887,11 +1956,20 @@ void ata_do_eh(struct ata_port *ap, ata_
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset)
{
+ struct ata_device *dev;
+ int rc;
+
if (!(ap->flags & (ATA_FLAG_LOADING | ATA_FLAG_UNLOADING))) {
- ata_eh_autopsy(&ap->link);
- ata_eh_report(&ap->link);
+ ata_eh_autopsy(ap);
+ ata_eh_report(ap);
+ }
+
+ rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset,
+ NULL);
+ if (rc) {
+ ata_link_for_each_dev(dev, &ap->link)
+ ata_dev_disable(dev);
}
- ata_eh_recover(ap, prereset, softreset, hardreset, postreset);
ata_eh_finish(ap);
}
--
1.2.4
next prev parent reply other threads:[~2006-05-11 16:30 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-11 16:30 [PATCHSET 09/11] implement ata_link Tejun Heo
2006-05-11 16:30 ` [PATCH 01/14] libata-link: add PM related ATA constants Tejun Heo
2006-05-11 16:30 ` [PATCH 02/14] libata-link: introduce ata_link Tejun Heo
2006-05-11 16:30 ` Tejun Heo [this message]
2006-05-11 16:30 ` [PATCH 09/14] libata-link: implement ata_link_abort() Tejun Heo
2006-05-11 16:30 ` [PATCH 08/14] libata-link: implement link->reset_tries Tejun Heo
2006-05-11 16:30 ` [PATCH 12/14] libata-link: update ata_dev_configure() to deal with PM links Tejun Heo
2006-05-11 16:30 ` [PATCH 03/14] libata-link: implement and use link/device iterators Tejun Heo
2006-05-11 16:30 ` [PATCH 06/14] libata-link: linkify config/EH related functions Tejun Heo
2006-05-11 16:30 ` [PATCH 05/14] libata-link: linkify reset Tejun Heo
2006-05-11 16:30 ` [PATCH 07/14] libata-link: separate out link initialization functions Tejun Heo
2006-05-11 16:30 ` [PATCH 10/14] libata-link: add PM links Tejun Heo
2006-05-11 16:30 ` [PATCH 04/14] libata-link: linkify PHY-related functions Tejun Heo
2006-05-11 16:30 ` [PATCH 11/14] libata-link: update ata_scsi_error() to handle PM links Tejun Heo
2006-05-11 16:30 ` [PATCH 14/14] libata-link: update hotplug " Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11473650233229-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=efalk@google.com \
--cc=forrest.zhao@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).