From: Ming Zhang <mingz@ele.uri.edu>
To: Tejun Heo <htejun@gmail.com>
Cc: linux-ide-list <linux-ide@vger.kernel.org>,
Jeff Garzik <jgarzik@pobox.com>
Subject: Re: hotplug works, but newly plug not
Date: Wed, 24 May 2006 17:32:51 -0400 [thread overview]
Message-ID: <1148506371.26093.182.camel@localhost.localdomain> (raw)
In-Reply-To: <4474CF3C.4050504@gmail.com>
nothing changed. no plug detected.
ahci 0000:00:1f.2: version 1.3
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: pcs 0xf->0xf
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x0 impl SATA
mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ata5: SATA max UDMA/133 cmd 0xF8820500 ctl 0x0 bmdma 0x0 irq 19
ata6: SATA max UDMA/133 cmd 0xF8820580 ctl 0x0 bmdma 0x0 irq 19
ata7: SATA max UDMA/133 cmd 0xF8820600 ctl 0x0 bmdma 0x0 irq 19
ata8: SATA max UDMA/133 cmd 0xF8820680 ctl 0x0 bmdma 0x0 irq 19
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 0)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 0)
scsi6 : ahci
ata7: SATA link down (SStatus 0 SControl 0)
scsi7 : ahci
ata8: SATA link down (SStatus 0 SControl 0)
On Wed, 2006-05-24 at 14:25 -0700, Tejun Heo wrote:
> Ming Zhang wrote:
> > my fault. forgot to say that the patch does not change the behavior.
> > nothing happen after plug a disk to empty slot.
> >
>
> Can you change 0xf to 0xff of the following line in the patch and see if
> anything changes?
>
> pci_write_config_byte(pdev, 0x92, 0xf);
> ^^^^-> 0xff
>
>
next prev parent reply other threads:[~2006-05-24 21:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-24 15:25 hotplug works, but newly plug not Ming Zhang
2006-05-24 20:51 ` Tejun Heo
2006-05-24 21:09 ` Ming Zhang
2006-05-24 21:20 ` Ming Zhang
2006-05-24 21:25 ` Tejun Heo
2006-05-24 21:32 ` Ming Zhang [this message]
2006-05-25 15:09 ` Ming Zhang
2006-05-25 15:14 ` Jeff Garzik
2006-05-25 15:17 ` Ming Zhang
2006-05-25 16:04 ` Ming Zhang
2006-05-25 17:08 ` Ming Zhang
2006-05-25 16:15 ` Ming Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1148506371.26093.182.camel@localhost.localdomain \
--to=mingz@ele.uri.edu \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox