From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, mlord@pobox.com, albertcc@tw.ibm.com,
alan@lxorguk.ukuu.org.uk, axboe@suse.de, forrest.zhao@intel.com,
linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 03/12] libata-hp-prep: make some ata_device fields persistent
Date: Mon, 29 May 2006 15:25:58 +0900 [thread overview]
Message-ID: <11488839582400-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11488839571850-git-send-email-htejun@gmail.com>
Lifetimes of some fields span over device plugging/unplugging. This
patch moves such persistent fields to the top of ata_device and
separate them with ATA_DEVICE_CLEAR_OFFSET. Fields above the offset
are initialized once during host initializatino while all other fields
are cleared before hotplugging. Currently ->ap, devno and part of
flags are persistent.
Note that flags is partially cleared while holding host_set lock.
This is to synchronize with later warm plug implementation which will
record hotplug request in dev->flags.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 14 ++++++++++++--
include/linux/libata.h | 11 +++++++++--
2 files changed, 21 insertions(+), 4 deletions(-)
a615dbf0ff4deac11925b7be6916caed19a66f3e
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 84afb59..fc9989d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5153,9 +5153,18 @@ static void ata_host_remove(struct ata_p
void ata_dev_init(struct ata_device *dev)
{
struct ata_port *ap = dev->ap;
+ unsigned long flags;
+
+ /* High bits of dev->flags are used to record warm plug
+ * requests which occur asynchronously. Synchronize using
+ * host_set lock.
+ */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ dev->flags &= ~ATA_DFLAG_INIT_MASK;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
- memset((void *)dev, 0, sizeof(*dev));
- dev->devno = dev - ap->device;
+ memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
+ sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
dev->udma_mask = UINT_MAX;
@@ -5217,6 +5226,7 @@ static void ata_host_init(struct ata_por
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
dev->ap = ap;
+ dev->devno = i;
ata_dev_init(dev);
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4f67c43..20c6aa1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -130,6 +130,7 @@ enum {
ATA_DFLAG_CFG_MASK = (1 << 8) - 1,
ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */
+ ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
ATA_DFLAG_DETACHED = (1 << 17),
@@ -409,10 +410,11 @@ struct ata_ering {
struct ata_device {
struct ata_port *ap;
- u64 n_sectors; /* size of device, if ATA */
+ unsigned int devno; /* 0 or 1 */
unsigned long flags; /* ATA_DFLAG_xxx */
+ /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
+ u64 n_sectors; /* size of device, if ATA */
unsigned int class; /* ATA_DEV_xxx */
- unsigned int devno; /* 0 or 1 */
u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
u8 pio_mode;
u8 dma_mode;
@@ -438,6 +440,11 @@ struct ata_device {
struct ata_ering ering;
};
+/* Offset into struct ata_device. Fields above it are maintained
+ * acress device init. Fields below are zeroed.
+ */
+#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors)
+
struct ata_eh_info {
struct ata_device *dev; /* offending device */
u32 serror; /* SError from LLDD */
--
1.3.2
next prev parent reply other threads:[~2006-05-29 6:26 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-29 6:25 [PATCHSET 01/03] prep for hotplug support, take 4 Tejun Heo
2006-05-29 6:25 ` [PATCH 01/12] libata-hp-prep: add flags and eh_info/context fields for hotplug Tejun Heo
2006-05-29 6:25 ` [PATCH 02/12] libata-hp-prep: implement ata_dev_init() Tejun Heo
2006-05-29 6:25 ` [PATCH 06/12] libata-hp-prep: implement ap->hw_sata_spd_limit Tejun Heo
2006-05-29 6:25 ` [PATCH 04/12] libata-hp-prep: update ata_scsi_find_dev() and friends Tejun Heo
2006-05-29 8:40 ` zhao, forrest
2006-05-29 9:09 ` Tejun Heo
2006-05-30 4:38 ` Jeff Garzik
2006-05-30 4:02 ` Jeff Garzik
2006-05-30 4:26 ` Tejun Heo
2006-05-30 4:37 ` Jeff Garzik
2006-05-30 4:43 ` Tejun Heo
2006-05-29 6:25 ` [PATCH 08/12] libata-hp-prep: add ata_scsi_wq Tejun Heo
2006-05-29 6:25 ` [PATCH 07/12] libata-hp-prep: store attached SCSI device Tejun Heo
2006-05-29 8:45 ` zhao, forrest
2006-05-29 9:14 ` Tejun Heo
2006-05-30 4:04 ` Jeff Garzik
2006-05-30 4:55 ` Tejun Heo
2006-05-29 6:25 ` [PATCH 10/12] libata-hp-prep: implement sata_phy_debounce() Tejun Heo
2006-05-30 4:10 ` Jeff Garzik
2006-05-30 5:08 ` Tejun Heo
2006-05-30 5:23 ` Jeff Garzik
2006-05-29 6:25 ` Tejun Heo [this message]
2006-05-30 4:00 ` [PATCH 03/12] libata-hp-prep: make some ata_device fields persistent Jeff Garzik
2006-05-29 6:25 ` [PATCH 05/12] libata-hp-prep: use __ata_scsi_find_dev() Tejun Heo
2006-05-29 6:25 ` [PATCH 11/12] libata-hp-prep: add prereset() method and implement ata_std_prereset() Tejun Heo
2006-05-29 11:12 ` [PATCH 11/12] (updated) " Tejun Heo
2006-05-30 4:12 ` Jeff Garzik
2006-05-29 6:25 ` [PATCH 12/12] libata-hp-prep: implement followup softreset handling Tejun Heo
2006-05-30 4:12 ` Jeff Garzik
2006-05-29 6:25 ` [PATCH 09/12] libata-hp-prep: make probing related functions global Tejun Heo
2006-05-30 4:06 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2006-05-31 11:05 [PATCHSET 01/03] prep for hotplug support, take 5 Tejun Heo
2006-05-31 11:05 ` [PATCH 03/12] libata-hp-prep: make some ata_device fields persistent Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11488839582400-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=forrest.zhao@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=mlord@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).