From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, mlord@pobox.com, albertcc@tw.ibm.com,
alan@lxorguk.ukuu.org.uk, axboe@suse.de, forrest.zhao@intel.com,
linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 11/13] sata_sil24: convert to new probing mechanism and add hotplug support
Date: Mon, 29 May 2006 15:38:56 +0900 [thread overview]
Message-ID: <11488847362278-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11488847352050-git-send-email-htejun@gmail.com>
Convert to new probing mechanism and add hotplug support by enabling
PORT_IRQ_PHYRDY_CHG, marking ehi for hotplug and scheduling EH on
PORT_IRQ_PHYRDY_CHG or PORT_IRQ_DEV_XCHG.
Sil3124/32 family of controllers don't have any mechanism to wait for
the first FIS34 after hotplug, so ATA_FLAG_CANT_WAIT_FIS34 is used.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/sata_sil24.c | 27 ++++++++-------------------
1 files changed, 8 insertions(+), 19 deletions(-)
cea49da1f8d8278d477d8b82fc6ae0a4f195faae
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index d4ca6d6..97e9339 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -159,7 +159,8 @@ enum {
PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
- PORT_IRQ_DEV_XCHG | PORT_IRQ_UNK_FIS,
+ PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
+ PORT_IRQ_UNK_FIS,
/* bits[27:16] are unmasked (raw) */
PORT_IRQ_RAW_SHIFT = 16,
@@ -228,7 +229,7 @@ enum {
/* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ,
+ ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
@@ -325,7 +326,6 @@ static u8 sil24_check_status(struct ata_
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
-static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap);
@@ -385,8 +385,6 @@ static const struct ata_port_operations
.tf_read = sil24_tf_read,
- .probe_reset = sil24_probe_reset,
-
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
@@ -635,13 +633,6 @@ static int sil24_hardreset(struct ata_po
return -EIO;
}
-static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes)
-{
- return ata_drive_probe_reset(ap, ata_std_probeinit,
- sil24_softreset, sil24_hardreset,
- ata_std_postreset, classes);
-}
-
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_sge *sge)
{
@@ -772,13 +763,11 @@ static void sil24_error_intr(struct ata_
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
- if (irq_stat & PORT_IRQ_DEV_XCHG) {
- ehi->err_mask |= AC_ERR_ATA_BUS;
- /* sil24 doesn't recover very well from phy
- * disconnection with a softreset. Force hardreset.
- */
- ehi->action |= ATA_EH_HARDRESET;
- ata_ehi_push_desc(ehi, ", device_exchanged");
+ if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, ", %s",
+ irq_stat & PORT_IRQ_PHYRDY_CHG ?
+ "PHY RDY changed" : "device exchanged");
freeze = 1;
}
--
1.3.2
next prev parent reply other threads:[~2006-05-29 6:39 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-29 6:38 [PATCHSET 03/03] add hotplug support, take 4 Tejun Heo
2006-05-29 6:38 ` [PATCH 01/13] libata-hp: implement ata_eh_detach_dev() Tejun Heo
2006-05-30 4:17 ` Jeff Garzik
2006-05-29 6:38 ` [PATCH 03/13] libata-hp: implement SCSI part of hotplug Tejun Heo
2006-05-29 6:38 ` [PATCH 02/13] libata-hp: implement hotplug Tejun Heo
2006-05-30 4:18 ` Jeff Garzik
2006-05-30 4:44 ` Tejun Heo
2006-05-29 6:38 ` Tejun Heo [this message]
2006-05-30 4:28 ` [PATCH 11/13] sata_sil24: convert to new probing mechanism and add hotplug support Jeff Garzik
2006-05-29 6:38 ` [PATCH 07/13] libata-hp: implement unload-unplug Tejun Heo
2006-05-30 4:24 ` Jeff Garzik
2006-05-30 4:37 ` Tejun Heo
2006-05-30 4:44 ` Jeff Garzik
2006-05-29 6:38 ` [PATCH 13/13] libata-hp: move ata_do_reset() to libata-eh.c Tejun Heo
2006-05-30 4:28 ` Jeff Garzik
2006-05-29 6:38 ` [PATCH 12/13] libata-hp: killl ops->probe_reset Tejun Heo
2006-05-29 6:38 ` [PATCH 10/13] ahci: convert to new probing mechanism and add hotplug support Tejun Heo
2006-05-30 4:27 ` Jeff Garzik
2006-05-29 6:38 ` [PATCH 09/13] sata_sil: " Tejun Heo
2006-05-30 4:26 ` Jeff Garzik
2006-05-29 6:38 ` [PATCH 08/13] ata_piix: convert ata_piix to new probing mechanism Tejun Heo
2006-05-29 6:38 ` [PATCH 04/13] libata-hp: implement warmplug Tejun Heo
2006-05-29 6:38 ` [PATCH 05/13] libata-hp: hook warmplug Tejun Heo
2006-05-30 4:21 ` Jeff Garzik
2006-05-29 6:38 ` [PATCH 06/13] libata-hp: implement bootplug Tejun Heo
2006-05-30 4:23 ` Jeff Garzik
2006-05-30 4:29 ` Tejun Heo
2006-05-30 4:34 ` Jeff Garzik
2006-05-30 4:40 ` Tejun Heo
2006-05-30 4:43 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2006-05-31 11:25 [PATCHSET 03/03] add hotplug support, take 5 Tejun Heo
2006-05-31 11:25 ` [PATCH 11/13] sata_sil24: convert to new probing mechanism and add hotplug support Tejun Heo
2006-05-19 15:48 [PATCHSET 03/03] add hotplug support, take 3 Tejun Heo
2006-05-19 15:48 ` [PATCH 11/13] sata_sil24: convert to new probing mechanism and add hotplug support Tejun Heo
2006-05-11 15:32 [PATCHSET 08/11] add hotplug support, take 2 Tejun Heo
2006-05-11 15:32 ` [PATCH 11/13] sata_sil24: convert to new probing mechanism and add hotplug support Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11488847362278-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=forrest.zhao@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=mlord@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).