[PATCH 09/13] sata_sil: convert to new probing mechanism and add hotplug support

[Tejun Heo <htejun@gmail.com>]

Convert to new probing mechanism and add hotplug support by enabling
SATA IRQ for SError.N, marking ehi for hotplug and scheduling EH on
SATA IRQs.

Sil3112/3512/3114 family of controllers use COMRESET as TF clearing
point and can reliably wait for FIS34 after COMRESET whether the FIS
is the first FIS34 after POR or in response to the COMRESET.  Thus,
setting ATA_FLAG_HRST_TO_RESUME is enough for device detection after
hotplug.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/sata_sil.c |   21 +++++++++++++--------
 1 files changed, 13 insertions(+), 8 deletions(-)

1068249a03081de450a306060e8a740d639920b3
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index d420495..9503fd2 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -56,7 +56,7 @@ enum {
 	SIL_FLAG_MOD15WRITE	= (1 << 30),
 
 	SIL_DFL_HOST_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO,
+				  ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME,
 
 	/*
 	 * Controller IDs
@@ -186,7 +186,6 @@ static const struct ata_port_operations 
 	.check_status		= ata_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
-	.probe_reset		= ata_std_probe_reset,
 	.post_set_mode		= sil_post_set_mode,
 	.bmdma_setup            = ata_bmdma_setup,
 	.bmdma_start            = ata_bmdma_start,
@@ -344,6 +343,11 @@ static void sil_host_intr(struct ata_por
 	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
 	u8 status;
 
+	if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
+		ata_ehi_hotplugged(&ap->eh_info);
+		goto freeze;
+	}
+
 	if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
 		goto freeze;
 
@@ -416,7 +420,7 @@ static irqreturn_t sil_interrupt(int irq
 		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
 			continue;
 
-		if (!(bmdma2 & SIL_DMA_COMPLETE))
+		if (!(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ)))
 			continue;
 
 		sil_host_intr(ap, bmdma2);
@@ -433,6 +437,9 @@ static void sil_freeze(struct ata_port *
 	void __iomem *mmio_base = ap->host_set->mmio_base;
 	u32 tmp;
 
+	/* global IRQ mask doesn't block SATA IRQ, turn off explicitly */
+	writel(0, mmio_base + sil_port[ap->port_no].sien);
+
 	/* plug IRQ */
 	tmp = readl(mmio_base + SIL_SYSCFG);
 	tmp |= SIL_MASK_IDE0_INT << ap->port_no;
@@ -449,6 +456,9 @@ static void sil_thaw(struct ata_port *ap
 	ata_chk_status(ap);
 	ata_bmdma_irq_clear(ap);
 
+	/* turn on SATA IRQ */
+	writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
+
 	/* turn on IRQ */
 	tmp = readl(mmio_base + SIL_SYSCFG);
 	tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no);
@@ -622,11 +632,6 @@ static int sil_init_one (struct pci_dev 
 			       mmio_base + sil_port[2].bmdma);
 	}
 
-	/* mask all SATA phy-related interrupts */
-	/* TODO: unmask bit 6 (SError N bit) for hotplug */
-	for (i = 0; i < probe_ent->n_ports; i++)
-		writel(0, mmio_base + sil_port[i].sien);
-
 	pci_set_master(pdev);
 
 	/* FIXME: check ata_device_add return value */
-- 
1.3.2